From: Yoshihiro Kaneko <ykaneko0929@gmail.com>
To: linux-renesas-soc@vger.kernel.org
Cc: Magnus Damm <magnus.damm@gmail.com>,
Simon Horman <horms@verge.net.au>,
Geert Uytterhoeven <geert@linux-m68k.org>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm64: dts: renesas: r8a774c0: sort nodes
Date: Mon, 19 Aug 2019 21:56:01 +0900 [thread overview]
Message-ID: <1566219361-23088-1-git-send-email-ykaneko0929@gmail.com> (raw)
Sort nodes.
If node address is present
* Sort by node address, grouping all nodes with the same compat string
and sorting the group alphabetically.
Else
* Sort alphabetically
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
---
This patch is based on the master branch of Geert Uytterhoeven's renesas-devel
tree.
arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 90 +++++++++++++++----------------
1 file changed, 45 insertions(+), 45 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 746775f..dc80c1a 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -1371,6 +1371,17 @@
"ssi.1", "ssi.0";
status = "disabled";
+ rcar_sound,ctu {
+ ctu00: ctu-0 { };
+ ctu01: ctu-1 { };
+ ctu02: ctu-2 { };
+ ctu03: ctu-3 { };
+ ctu10: ctu-4 { };
+ ctu11: ctu-5 { };
+ ctu12: ctu-6 { };
+ ctu13: ctu-7 { };
+ };
+
rcar_sound,dvc {
dvc0: dvc-0 {
dmas = <&audma0 0xbc>;
@@ -1387,17 +1398,6 @@
mix1: mix-1 { };
};
- rcar_sound,ctu {
- ctu00: ctu-0 { };
- ctu01: ctu-1 { };
- ctu02: ctu-2 { };
- ctu03: ctu-3 { };
- ctu10: ctu-4 { };
- ctu11: ctu-5 { };
- ctu12: ctu-6 { };
- ctu13: ctu-7 { };
- };
-
rcar_sound,src {
src0: src-0 {
interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
@@ -1706,13 +1706,24 @@
renesas,fcp = <&fcpvb0>;
};
- fcpvb0: fcp@fe96f000 {
- compatible = "renesas,fcpv";
- reg = <0 0xfe96f000 0 0x200>;
- clocks = <&cpg CPG_MOD 607>;
+ vspd0: vsp@fea20000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea20000 0 0x7000>;
+ interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 623>;
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
- resets = <&cpg 607>;
- iommus = <&ipmmu_vp0 5>;
+ resets = <&cpg 623>;
+ renesas,fcp = <&fcpvd0>;
+ };
+
+ vspd1: vsp@fea28000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea28000 0 0x7000>;
+ interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 622>;
+ power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+ resets = <&cpg 622>;
+ renesas,fcp = <&fcpvd1>;
};
vspi0: vsp@fe9a0000 {
@@ -1725,23 +1736,13 @@
renesas,fcp = <&fcpvi0>;
};
- fcpvi0: fcp@fe9af000 {
+ fcpvb0: fcp@fe96f000 {
compatible = "renesas,fcpv";
- reg = <0 0xfe9af000 0 0x200>;
- clocks = <&cpg CPG_MOD 611>;
- power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
- resets = <&cpg 611>;
- iommus = <&ipmmu_vp0 8>;
- };
-
- vspd0: vsp@fea20000 {
- compatible = "renesas,vsp2";
- reg = <0 0xfea20000 0 0x7000>;
- interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 623>;
+ reg = <0 0xfe96f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 607>;
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
- resets = <&cpg 623>;
- renesas,fcp = <&fcpvd0>;
+ resets = <&cpg 607>;
+ iommus = <&ipmmu_vp0 5>;
};
fcpvd0: fcp@fea27000 {
@@ -1753,16 +1754,6 @@
iommus = <&ipmmu_vi0 8>;
};
- vspd1: vsp@fea28000 {
- compatible = "renesas,vsp2";
- reg = <0 0xfea28000 0 0x7000>;
- interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 622>;
- power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
- resets = <&cpg 622>;
- renesas,fcp = <&fcpvd1>;
- };
-
fcpvd1: fcp@fea2f000 {
compatible = "renesas,fcpv";
reg = <0 0xfea2f000 0 0x200>;
@@ -1772,6 +1763,15 @@
iommus = <&ipmmu_vi0 9>;
};
+ fcpvi0: fcp@fe9af000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe9af000 0 0x200>;
+ clocks = <&cpg CPG_MOD 611>;
+ power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+ resets = <&cpg 611>;
+ iommus = <&ipmmu_vp0 8>;
+ };
+
csi40: csi2@feaa0000 {
compatible = "renesas,r8a774c0-csi2";
reg = <0 0xfeaa0000 0 0x10000>;
@@ -1908,6 +1908,9 @@
polling-delay = <1000>;
thermal-sensors = <&thermal>;
+ cooling-maps {
+ };
+
trips {
cpu-crit {
temperature = <120000>;
@@ -1915,9 +1918,6 @@
type = "critical";
};
};
-
- cooling-maps {
- };
};
};
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-08-19 12:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-19 12:56 Yoshihiro Kaneko [this message]
2019-08-21 8:46 ` [PATCH] arm64: dts: renesas: r8a774c0: sort nodes Simon Horman
2019-08-21 8:57 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1566219361-23088-1-git-send-email-ykaneko0929@gmail.com \
--to=ykaneko0929@gmail.com \
--cc=geert@linux-m68k.org \
--cc=horms@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).