From: <Eugen.Hristev@microchip.com>
To: <wsa@the-dreams.de>, <peda@axentia.se>, <mark.rutland@arm.com>,
<Ludovic.Desroches@microchip.com>, <linux-i2c@vger.kernel.org>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <alexandre.belloni@bootlin.com>,
<robh+dt@kernel.org>
Cc: Eugen.Hristev@microchip.com
Subject: [PATCH v5 7/9] i2c: at91: add support for analog filtering
Date: Wed, 11 Sep 2019 08:24:34 +0000 [thread overview]
Message-ID: <1568189911-31641-8-git-send-email-eugen.hristev@microchip.com> (raw)
In-Reply-To: <1568189911-31641-1-git-send-email-eugen.hristev@microchip.com>
From: Eugen Hristev <eugen.hristev@microchip.com>
Add support for analog filtering for i2c lines.
The sama5d2 and sam9x60 support this feature.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
drivers/i2c/busses/i2c-at91-core.c | 9 +++++++++
drivers/i2c/busses/i2c-at91-master.c | 18 ++++++++++++++----
drivers/i2c/busses/i2c-at91.h | 3 +++
3 files changed, 26 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-at91-core.c b/drivers/i2c/busses/i2c-at91-core.c
index 1f4ee7e..e13af48 100644
--- a/drivers/i2c/busses/i2c-at91-core.c
+++ b/drivers/i2c/busses/i2c-at91-core.c
@@ -70,6 +70,7 @@ static struct at91_twi_pdata at91rm9200_config = {
.has_hold_field = false,
.has_dig_filtr = false,
.has_adv_dig_filtr = false,
+ .has_ana_filtr = false,
};
static struct at91_twi_pdata at91sam9261_config = {
@@ -80,6 +81,7 @@ static struct at91_twi_pdata at91sam9261_config = {
.has_hold_field = false,
.has_dig_filtr = false,
.has_adv_dig_filtr = false,
+ .has_ana_filtr = false,
};
static struct at91_twi_pdata at91sam9260_config = {
@@ -90,6 +92,7 @@ static struct at91_twi_pdata at91sam9260_config = {
.has_hold_field = false,
.has_dig_filtr = false,
.has_adv_dig_filtr = false,
+ .has_ana_filtr = false,
};
static struct at91_twi_pdata at91sam9g20_config = {
@@ -100,6 +103,7 @@ static struct at91_twi_pdata at91sam9g20_config = {
.has_hold_field = false,
.has_dig_filtr = false,
.has_adv_dig_filtr = false,
+ .has_ana_filtr = false,
};
static struct at91_twi_pdata at91sam9g10_config = {
@@ -110,6 +114,7 @@ static struct at91_twi_pdata at91sam9g10_config = {
.has_hold_field = false,
.has_dig_filtr = false,
.has_adv_dig_filtr = false,
+ .has_ana_filtr = false,
};
static const struct platform_device_id at91_twi_devtypes[] = {
@@ -142,6 +147,7 @@ static struct at91_twi_pdata at91sam9x5_config = {
.has_hold_field = false,
.has_dig_filtr = false,
.has_adv_dig_filtr = false,
+ .has_ana_filtr = false,
};
static struct at91_twi_pdata sama5d4_config = {
@@ -152,6 +158,7 @@ static struct at91_twi_pdata sama5d4_config = {
.has_hold_field = true,
.has_dig_filtr = true,
.has_adv_dig_filtr = false,
+ .has_ana_filtr = false,
};
static struct at91_twi_pdata sama5d2_config = {
@@ -162,6 +169,7 @@ static struct at91_twi_pdata sama5d2_config = {
.has_hold_field = true,
.has_dig_filtr = true,
.has_adv_dig_filtr = true,
+ .has_ana_filtr = true,
};
static struct at91_twi_pdata sam9x60_config = {
@@ -172,6 +180,7 @@ static struct at91_twi_pdata sam9x60_config = {
.has_hold_field = true,
.has_dig_filtr = true,
.has_adv_dig_filtr = true,
+ .has_ana_filtr = true,
};
static const struct of_device_id atmel_twi_dt_ids[] = {
diff --git a/drivers/i2c/busses/i2c-at91-master.c b/drivers/i2c/busses/i2c-at91-master.c
index 273bd8b..6e0b554 100644
--- a/drivers/i2c/busses/i2c-at91-master.c
+++ b/drivers/i2c/busses/i2c-at91-master.c
@@ -32,6 +32,7 @@
void at91_init_twi_bus_master(struct at91_twi_dev *dev)
{
struct at91_twi_pdata *pdata = dev->pdata;
+ u32 filtr = 0;
/* FIFO should be enabled immediately after the software reset */
if (dev->fifo_size)
@@ -42,13 +43,20 @@ void at91_init_twi_bus_master(struct at91_twi_dev *dev)
/* enable digital filter */
if (pdata->has_dig_filtr && dev->enable_dig_filt)
- at91_twi_write(dev, AT91_TWI_FILTR, AT91_TWI_FILTR_FILT);
+ filtr |= AT91_TWI_FILTR_FILT;
/* enable advanced digital filter */
if (pdata->has_adv_dig_filtr && dev->enable_dig_filt)
- at91_twi_write(dev, AT91_TWI_FILTR, AT91_TWI_FILTR_FILT |
- (AT91_TWI_FILTR_THRES(dev->filter_width) &
- AT91_TWI_FILTR_THRES_MASK));
+ filtr |= AT91_TWI_FILTR_FILT |
+ (AT91_TWI_FILTR_THRES(dev->filter_width) &
+ AT91_TWI_FILTR_THRES_MASK);
+
+ /* enable analog filter */
+ if (pdata->has_ana_filtr && dev->enable_ana_filt)
+ filtr |= AT91_TWI_FILTR_PADFEN;
+
+ if (filtr)
+ at91_twi_write(dev, AT91_TWI_FILTR, filtr);
}
/*
@@ -826,6 +834,8 @@ int at91_twi_probe_master(struct platform_device *pdev,
dev->enable_dig_filt = of_property_read_bool(pdev->dev.of_node,
"i2c-digital-filter");
+ dev->enable_ana_filt = of_property_read_bool(pdev->dev.of_node,
+ "i2c-analog-filter");
at91_calc_twi_clock(dev);
dev->adapter.algo = &at91_twi_algorithm;
diff --git a/drivers/i2c/busses/i2c-at91.h b/drivers/i2c/busses/i2c-at91.h
index d7cf01e3..977a67b 100644
--- a/drivers/i2c/busses/i2c-at91.h
+++ b/drivers/i2c/busses/i2c-at91.h
@@ -86,6 +86,7 @@
#define AT91_TWI_FILTR 0x0044
#define AT91_TWI_FILTR_FILT BIT(0)
+#define AT91_TWI_FILTR_PADFEN BIT(1)
#define AT91_TWI_FILTR_THRES(v) ((v) << 8)
#define AT91_TWI_FILTR_THRES_MAX 7
#define AT91_TWI_FILTR_THRES_MASK GENMASK(10, 8)
@@ -116,6 +117,7 @@ struct at91_twi_pdata {
bool has_hold_field;
bool has_dig_filtr;
bool has_adv_dig_filtr;
+ bool has_ana_filtr;
struct at_dma_slave dma_slave;
};
@@ -154,6 +156,7 @@ struct at91_twi_dev {
struct i2c_client *slave;
#endif
bool enable_dig_filt;
+ bool enable_ana_filt;
u32 filter_width;
};
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-09-11 8:26 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-11 8:24 [PATCH v5 0/9] i2c: add support for filters Eugen.Hristev
2019-09-11 8:24 ` [PATCH v5 1/9] dt-bindings: i2c: at91: add new compatible Eugen.Hristev
2019-09-11 8:24 ` [PATCH v5 2/9] dt-bindings: i2c: add bindings for i2c analog and digital filter Eugen.Hristev
2019-09-17 14:28 ` Rob Herring
2019-09-11 8:24 ` [PATCH v5 3/9] i2c: add support for filters optional properties Eugen.Hristev
2019-10-21 15:20 ` Peter Rosin
2019-09-11 8:24 ` [PATCH v5 4/9] i2c: at91: add new platform support for sam9x60 Eugen.Hristev
2019-09-11 8:24 ` [PATCH v5 5/9] i2c: at91: add support for digital filtering Eugen.Hristev
2019-09-11 8:24 ` [PATCH v5 6/9] i2c: at91: add support for advanced " Eugen.Hristev
2019-09-11 8:24 ` Eugen.Hristev [this message]
2019-09-11 8:24 ` [PATCH v5 8/9] ARM: dts: at91: sama5d2_xplained: add analog and digital filter for i2c Eugen.Hristev
2019-09-11 8:24 ` [PATCH v5 9/9] ARM: dts: at91: sama5d4_xplained: add " Eugen.Hristev
2019-09-14 19:32 ` [PATCH v5 0/9] i2c: add support for filters Ludovic Desroches
2019-10-07 7:53 ` Eugen.Hristev
2019-10-14 7:01 ` Eugen.Hristev
2019-10-21 14:05 ` Wolfram Sang
2019-10-21 15:23 ` Peter Rosin
2019-10-23 11:01 ` Eugen.Hristev
2019-10-23 12:19 ` Wolfram Sang
2019-10-24 18:30 ` Wolfram Sang
2019-10-25 10:05 ` Ludovic Desroches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1568189911-31641-8-git-send-email-eugen.hristev@microchip.com \
--to=eugen.hristev@microchip.com \
--cc=Ludovic.Desroches@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=peda@axentia.se \
--cc=robh+dt@kernel.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).