[PATCH v3 0/4] arm64: Add basic support for Amlogic A1 SoC Family

[PATCH v3 0/4] arm64: Add basic support for Amlogic A1 SoC Family

[Jianxin Pan]

A1 is an application processor designed for smart audio and IoT applications,
with Dual core ARM Cortex-A35 CPU. Unlike the previous GXL and G12 series,
there is no Cortex-M3 AO CPU in it.

This serial add basic support for the Amlogic A1 based Amlogic AD401 board:
which describe components as follows: Reserve Memory, CPU, GIC, IRQ,
Timer, UART. It's capable of booting up into the serial console.

The pclk for uart_AO_B need to be fixed once A1 clock driver is merged.
In this version, it rely on bootloader to enable the pclk gate

Changes since v2 at [1]:
 - add bus in dts according Martin's suggestion
 - remove useless comment line

Changes since v1 at [0]:
 - fix coding style
 - collect Reviewed-by

[0] https://lore.kernel.org/linux-amlogic/1567493475-75451-1-git-send-email-jianxin.pan@amlogic.com/
[1] https://lore.kernel.org/linux-amlogic/1567667251-33466-1-git-send-email-jianxin.pan@amlogic.com

Jianxin Pan (4):
  soc: amlogic: meson-gx-socinfo: Add A1 and A113L IDs
  dt-bindings: arm: amlogic: add A1 bindings
  dt-bindings: arm: amlogic: add Amlogic AD401 bindings
  arm64: dts: add support for A1 based Amlogic AD401

 Documentation/devicetree/bindings/arm/amlogic.yaml |   6 +
 arch/arm64/boot/dts/amlogic/Makefile               |   1 +
 arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts     |  30 +++++
 arch/arm64/boot/dts/amlogic/meson-a1.dtsi          | 131 +++++++++++++++++++++
 drivers/soc/amlogic/meson-gx-socinfo.c             |   2 +
 5 files changed, 170 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-a1.dtsi

-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 1/4] soc: amlogic: meson-gx-socinfo: Add A1 and A113L IDs

[Jianxin Pan]

Add the SoC IDs for the A113L Amlogic A1 SoC.

Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/soc/amlogic/meson-gx-socinfo.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/soc/amlogic/meson-gx-socinfo.c b/drivers/soc/amlogic/meson-gx-socinfo.c
index 6d0d04f..3c86d8d 100644
--- a/drivers/soc/amlogic/meson-gx-socinfo.c
+++ b/drivers/soc/amlogic/meson-gx-socinfo.c
@@ -40,6 +40,7 @@ static const struct meson_gx_soc_id {
 	{ "G12A", 0x28 },
 	{ "G12B", 0x29 },
 	{ "SM1", 0x2b },
+	{ "A1", 0x2c },
 };
 
 static const struct meson_gx_package_id {
@@ -68,6 +69,7 @@ static const struct meson_gx_package_id {
 	{ "S922X", 0x29, 0x40, 0xf0 },
 	{ "A311D", 0x29, 0x10, 0xf0 },
 	{ "S905X3", 0x2b, 0x5, 0xf },
+	{ "A113L", 0x2c, 0x0, 0xf8 },
 };
 
 static inline unsigned int socinfo_to_major(u32 socinfo)
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 2/4] dt-bindings: arm: amlogic: add A1 bindings

[Jianxin Pan]

Add bindings for the new Amlogic A1 SoC family.

A1 is an application processor designed for smart audio and IoT applications,
with dual core Cortex-A35.

Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/arm/amlogic.yaml | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 99015ce..0ef45ac 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -156,4 +156,8 @@ properties:
               - seirobotics,sei610
               - khadas,vim3l
           - const: amlogic,sm1
+
+      - description: Boards with the Amlogic Meson A1 A113L SoC
+        items:
+          - const: amlogic,a1
 ...
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 3/4] dt-bindings: arm: amlogic: add Amlogic AD401 bindings

[Jianxin Pan]

Add the compatible for the Amlogic A1 Based AD401 board.

Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/arm/amlogic.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 0ef45ac..ee5703c 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -159,5 +159,7 @@ properties:
 
       - description: Boards with the Amlogic Meson A1 A113L SoC
         items:
+          - enum:
+              - amlogic,ad401
           - const: amlogic,a1
 ...
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 4/4] arm64: dts: add support for A1 based Amlogic AD401

[Jianxin Pan]

Add basic support for the Amlogic A1 based Amlogic AD401 board:
which describe components as follows: Reserve Memory, CPU, GIC, IRQ,
Timer, UART. It's capable of booting up into the serial console.

Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/Makefile           |   1 +
 arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts |  30 ++++++
 arch/arm64/boot/dts/amlogic/meson-a1.dtsi      | 131 +++++++++++++++++++++++++
 3 files changed, 162 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-a1.dtsi

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 84afecb..a90be52 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -36,3 +36,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts b/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
new file mode 100644
index 00000000..69c25c6
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-a1.dtsi"
+
+/ {
+	compatible = "amlogic,ad401", "amlogic,a1";
+	model = "Amlogic Meson A1 AD401 Development Board";
+
+	aliases {
+		serial0 = &uart_AO_B;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x8000000>;
+	};
+};
+
+&uart_AO_B {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
new file mode 100644
index 00000000..7da448c
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "amlogic,a1";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x800000>;
+			alignment = <0x0 0x400000>;
+			linux,cma-default;
+		};
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+
+		apb: bus@0xfe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x1000000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>;
+
+			uart_AO: serial@1c00 {
+				compatible = "amlogic,meson-gx-uart",
+					     "amlogic,meson-ao-uart";
+				reg = <0x0 0x1c00 0x0 0x18>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			uart_AO_B: serial@2000 {
+				compatible = "amlogic,meson-gx-uart",
+					     "amlogic,meson-ao-uart";
+				reg = <0x0 0x2000 0x0 0x18>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+		};
+
+		gic: interrupt-controller@ff901000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xff901000 0x0 0x1000>,
+			      <0x0 0xff902000 0x0 0x2000>,
+			      <0x0 0xff904000 0x0 0x2000>,
+			      <0x0 0xff906000 0x0 0x2000>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+};
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 4/4] arm64: dts: add support for A1 based Amlogic AD401

[Neil Armstrong]

On 11/09/2019 17:38, Jianxin Pan wrote:
> Add basic support for the Amlogic A1 based Amlogic AD401 board:
> which describe components as follows: Reserve Memory, CPU, GIC, IRQ,
> Timer, UART. It's capable of booting up into the serial console.
> 
> Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
>  arch/arm64/boot/dts/amlogic/Makefile           |   1 +
>  arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts |  30 ++++++
>  arch/arm64/boot/dts/amlogic/meson-a1.dtsi      | 131 +++++++++++++++++++++++++
>  3 files changed, 162 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-a1.dtsi
> 
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index 84afecb..a90be52 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -36,3 +36,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts b/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
> new file mode 100644
> index 00000000..69c25c6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
> @@ -0,0 +1,30 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-a1.dtsi"
> +
> +/ {
> +	compatible = "amlogic,ad401", "amlogic,a1";
> +	model = "Amlogic Meson A1 AD401 Development Board";
> +
> +	aliases {
> +		serial0 = &uart_AO_B;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x0 0x0 0x0 0x8000000>;
> +	};
> +};
> +
> +&uart_AO_B {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
> new file mode 100644
> index 00000000..7da448c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
> @@ -0,0 +1,131 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> +	compatible = "amlogic,a1";
> +
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		cpu0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35";
> +			reg = <0x0 0x0>;
> +			enable-method = "psci";
> +			next-level-cache = <&l2>;
> +		};
> +
> +		cpu1: cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35";
> +			reg = <0x0 0x1>;
> +			enable-method = "psci";
> +			next-level-cache = <&l2>;
> +		};
> +
> +		l2: l2-cache0 {
> +			compatible = "cache";
> +		};
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +	};
> +
> +	reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		linux,cma {
> +			compatible = "shared-dma-pool";
> +			reusable;
> +			size = <0x0 0x800000>;
> +			alignment = <0x0 0x400000>;
> +			linux,cma-default;
> +		};
> +	};
> +
> +	sm: secure-monitor {
> +		compatible = "amlogic,meson-gxbb-sm";
> +	};
> +
> +	soc {
> +		compatible = "simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +
> +		apb: bus@0xfe000000 {

Should be bus@fe000000

> +			compatible = "simple-bus";
> +			reg = <0x0 0xfe000000 0x0 0x1000000>;
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>;
> +
> +			uart_AO: serial@1c00 {
> +				compatible = "amlogic,meson-gx-uart",
> +					     "amlogic,meson-ao-uart";
> +				reg = <0x0 0x1c00 0x0 0x18>;
> +				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
> +				clocks = <&xtal>, <&xtal>, <&xtal>;
> +				clock-names = "xtal", "pclk", "baud";
> +				status = "disabled";
> +			};
> +
> +			uart_AO_B: serial@2000 {
> +				compatible = "amlogic,meson-gx-uart",
> +					     "amlogic,meson-ao-uart";
> +				reg = <0x0 0x2000 0x0 0x18>;
> +				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
> +				clocks = <&xtal>, <&xtal>, <&xtal>;
> +				clock-names = "xtal", "pclk", "baud";
> +				status = "disabled";
> +			};
> +		};
> +
> +		gic: interrupt-controller@ff901000 {
> +			compatible = "arm,gic-400";
> +			reg = <0x0 0xff901000 0x0 0x1000>,
> +			      <0x0 0xff902000 0x0 0x2000>,
> +			      <0x0 0xff904000 0x0 0x2000>,
> +			      <0x0 0xff906000 0x0 0x2000>;
> +			interrupt-controller;
> +			interrupts = <GIC_PPI 9
> +				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
> +			#interrupt-cells = <3>;
> +			#address-cells = <0>;
> +		};
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13
> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 14
> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 11
> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 10
> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
> +	};
> +
> +	xtal: xtal-clk {
> +		compatible = "fixed-clock";
> +		clock-frequency = <24000000>;
> +		clock-output-names = "xtal";
> +		#clock-cells = <0>;
> +	};
> +};
> 

With that fixed:
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>

Neil

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 4/4] arm64: dts: add support for A1 based Amlogic AD401

[Jianxin Pan]

Hi Neil,


On 2019/9/11 23:54, Neil Armstrong wrote:
> On 11/09/2019 17:38, Jianxin Pan wrote:
>> Add basic support for the Amlogic A1 based Amlogic AD401 board:
>> which describe components as follows: Reserve Memory, CPU, GIC, IRQ,
>> Timer, UART. It's capable of booting up into the serial console.
>>
>> Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
>> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
>> ---
>>  arch/arm64/boot/dts/amlogic/Makefile           |   1 +
>>  arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts |  30 ++++++
>>  arch/arm64/boot/dts/amlogic/meson-a1.dtsi      | 131 +++++++++++++++++++++++++
>>  3 files changed, 162 insertions(+)
[...]
>> +
>> +	sm: secure-monitor {
>> +		compatible = "amlogic,meson-gxbb-sm";
>> +	};
>> +
>> +	soc {
>> +		compatible = "simple-bus";
>> +		#address-cells = <2>;
>> +		#size-cells = <2>;
>> +		ranges;
>> +
>> +
>> +		apb: bus@0xfe000000 {
> 
> Should be bus@fe000000
>
Thanks for your review.
I resent a new version and fixed it.
>> +			compatible = "simple-bus";
>> +			reg = <0x0 0xfe000000 0x0 0x1000000>;
>> +			#address-cells = <2>;
>> +			#size-cells = <2>;
[...]
>> +	xtal: xtal-clk {
>> +		compatible = "fixed-clock";
>> +		clock-frequency = <24000000>;
>> +		clock-output-names = "xtal";
>> +		#clock-cells = <0>;
>> +	};
>> +};
>>
> 
> With that fixed:
> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
> 
> Neil
> 
> .
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel