[PATCH RESEND v3 0/4] arm64: meson: add support for A1 Power Domains

[PATCH RESEND v3 0/4] arm64: meson: add support for A1 Power Domains

[Jianxin Pan]

This patchset introduces a "Secure Power Doamin Controller". In A1/C1, power
controller registers such as PWRCTRL_FOCRSTN, PWRCTRL_PWR_OFF, PWRCTRL_MEM_PD
and PWRCTRL_ISO_EN, are in the secure domain, and should be accessed from ATF
by smc.


Changes since v1 at [1]:
- update domain id
- include dt-bindings in dts

Changes since v1 at [0]:
- use APIs from sm driver
- rename pwrc_secure_get_power as Kevin suggested
- add comments for always on domains
- replace arch_initcall_sync with builtin_platform_driver
- fix coding style

[0]  https://lore.kernel.org/linux-amlogic/1568895064-4116-1-git-send-email-jianxin.pan@amlogic.com
[1]  https://lore.kernel.org/linux-amlogic/1570695678-42623-1-git-send-email-jianxin.pan@amlogic.com

Jianxin Pan (4):
  dt-bindings: power: add Amlogic secure power domains bindings
  firmware: meson_sm: Add secure power domain support
  soc: amlogic: Add support for Secure power domains controller
  arm64: dts: meson: a1: add secure power domain controller

 .../bindings/power/amlogic,meson-sec-pwrc.yaml     |  42 +++++
 arch/arm64/boot/dts/amlogic/meson-a1.dtsi          |   8 +
 drivers/firmware/meson/meson_sm.c                  |   2 +
 drivers/soc/amlogic/Kconfig                        |  13 ++
 drivers/soc/amlogic/Makefile                       |   1 +
 drivers/soc/amlogic/meson-secure-pwrc.c            | 204 +++++++++++++++++++++
 include/dt-bindings/power/meson-a1-power.h         |  32 ++++
 include/linux/firmware/meson/meson_sm.h            |   2 +
 8 files changed, 304 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
 create mode 100644 drivers/soc/amlogic/meson-secure-pwrc.c
 create mode 100644 include/dt-bindings/power/meson-a1-power.h

-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 1/4] dt-bindings: power: add Amlogic secure power domains bindings

[Jianxin Pan]

Add the bindings for the Amlogic Secure power domains, controlling the
secure power domains.

The bindings targets the Amlogic A1 and C1 compatible SoCs, in which the
power domain registers are in secure world.

Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
---
 .../bindings/power/amlogic,meson-sec-pwrc.yaml     | 42 ++++++++++++++++++++++
 include/dt-bindings/power/meson-a1-power.h         | 32 +++++++++++++++++
 2 files changed, 74 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
 create mode 100644 include/dt-bindings/power/meson-a1-power.h

diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
new file mode 100644
index 00000000..88d8261
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+# Copyright (c) 2019 Amlogic, Inc
+# Author: Jianxin Pan <jianxin.pan@amlogic.com>
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/amlogic,meson-sec-pwrc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Meson Secure Power Domains
+
+maintainers:
+  - Jianxin Pan <jianxin.pan@amlogic.com>
+
+description: |+
+  Meson Secure Power Domains used in A1/C1 SoCs.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-a1-pwrc
+
+  "#power-domain-cells":
+    const: 1
+
+  secure-monitor:
+    description: phandle to the secure-monitor node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - "#power-domain-cells"
+  - secure-monitor
+
+examples:
+  - |
+    pwrc: power-controller {
+          compatible = "amlogic,meson-a1-pwrc";
+          #power-domain-cells = <1>;
+          secure-monitor = <&sm>;
+    };
+
+
diff --git a/include/dt-bindings/power/meson-a1-power.h b/include/dt-bindings/power/meson-a1-power.h
new file mode 100644
index 00000000..6cf50bf
--- /dev/null
+++ b/include/dt-bindings/power/meson-a1-power.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (c) 2019 Amlogic, Inc.
+ * Author: Jianxin Pan <jianxin.pan@amlogic.com>
+ */
+
+#ifndef _DT_BINDINGS_MESON_A1_POWER_H
+#define _DT_BINDINGS_MESON_A1_POWER_H
+
+#define PWRC_DSPA_ID	8
+#define PWRC_DSPB_ID	9
+#define PWRC_UART_ID	10
+#define PWRC_DMC_ID	11
+#define PWRC_I2C_ID	12
+#define PWRC_PSRAM_ID	13
+#define PWRC_ACODEC_ID	14
+#define PWRC_AUDIO_ID	15
+#define PWRC_OTP_ID	16
+#define PWRC_DMA_ID	17
+#define PWRC_SD_EMMC_ID	18
+#define PWRC_RAMA_ID	19
+#define PWRC_RAMB_ID	20
+#define PWRC_IR_ID	21
+#define PWRC_SPICC_ID	22
+#define PWRC_SPIFC_ID	23
+#define PWRC_USB_ID	24
+#define PWRC_NIC_ID	25
+#define PWRC_PDMIN_ID	26
+#define PWRC_RSA_ID	27
+#define PWRC_MAX_ID	28
+
+#endif
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 2/4] firmware: meson_sm: Add secure power domain support

[Jianxin Pan]

The Amlogic Meson A1/C1 Secure Monitor implements calls to control power
domain.

Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
---
 drivers/firmware/meson/meson_sm.c       | 2 ++
 include/linux/firmware/meson/meson_sm.h | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/drivers/firmware/meson/meson_sm.c b/drivers/firmware/meson/meson_sm.c
index 1d5b4d7..7ec09f5 100644
--- a/drivers/firmware/meson/meson_sm.c
+++ b/drivers/firmware/meson/meson_sm.c
@@ -44,6 +44,8 @@ static const struct meson_sm_chip gxbb_chip = {
 		CMD(SM_EFUSE_WRITE,	0x82000031),
 		CMD(SM_EFUSE_USER_MAX,	0x82000033),
 		CMD(SM_GET_CHIP_ID,	0x82000044),
+		CMD(SM_PWRC_SET,	0x82000093),
+		CMD(SM_PWRC_GET,	0x82000095),
 		{ /* sentinel */ },
 	},
 };
diff --git a/include/linux/firmware/meson/meson_sm.h b/include/linux/firmware/meson/meson_sm.h
index 6669e2a..4ed3989 100644
--- a/include/linux/firmware/meson/meson_sm.h
+++ b/include/linux/firmware/meson/meson_sm.h
@@ -12,6 +12,8 @@ enum {
 	SM_EFUSE_WRITE,
 	SM_EFUSE_USER_MAX,
 	SM_GET_CHIP_ID,
+	SM_PWRC_SET,
+	SM_PWRC_GET,
 };
 
 struct meson_sm_firmware;
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 3/4] soc: amlogic: Add support for Secure power domains controller

[Jianxin Pan]

Add support for the Amlogic Secure Power controller. In A1/C1 series, power
control registers are in secure domain, and should be accessed by smc.

Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
---
 drivers/soc/amlogic/Kconfig             |  13 ++
 drivers/soc/amlogic/Makefile            |   1 +
 drivers/soc/amlogic/meson-secure-pwrc.c | 204 ++++++++++++++++++++++++++++++++
 3 files changed, 218 insertions(+)
 create mode 100644 drivers/soc/amlogic/meson-secure-pwrc.c

diff --git a/drivers/soc/amlogic/Kconfig b/drivers/soc/amlogic/Kconfig
index bc2c912..6cb06e7 100644
--- a/drivers/soc/amlogic/Kconfig
+++ b/drivers/soc/amlogic/Kconfig
@@ -48,6 +48,19 @@ config MESON_EE_PM_DOMAINS
 	  Say yes to expose Amlogic Meson Everything-Else Power Domains as
 	  Generic Power Domains.
 
+config MESON_SECURE_PM_DOMAINS
+	bool "Amlogic Meson Secure Power Domains driver"
+	depends on ARCH_MESON || COMPILE_TEST
+	depends on PM && OF
+	depends on HAVE_ARM_SMCCC
+	default ARCH_MESON
+	select PM_GENERIC_DOMAINS
+	select PM_GENERIC_DOMAINS_OF
+	help
+	  Support for the power controller on Amlogic A1/C1 series.
+	  Say yes to expose Amlogic Meson Secure Power Domains as Generic
+	  Power Domains.
+
 config MESON_MX_SOCINFO
 	bool "Amlogic Meson MX SoC Information driver"
 	depends on ARCH_MESON || COMPILE_TEST
diff --git a/drivers/soc/amlogic/Makefile b/drivers/soc/amlogic/Makefile
index de79d044..7b8c5d3 100644
--- a/drivers/soc/amlogic/Makefile
+++ b/drivers/soc/amlogic/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_MESON_GX_SOCINFO) += meson-gx-socinfo.o
 obj-$(CONFIG_MESON_GX_PM_DOMAINS) += meson-gx-pwrc-vpu.o
 obj-$(CONFIG_MESON_MX_SOCINFO) += meson-mx-socinfo.o
 obj-$(CONFIG_MESON_EE_PM_DOMAINS) += meson-ee-pwrc.o
+obj-$(CONFIG_MESON_SECURE_PM_DOMAINS) += meson-secure-pwrc.o
diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
new file mode 100644
index 00000000..181b066
--- /dev/null
+++ b/drivers/soc/amlogic/meson-secure-pwrc.c
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Amlogic, Inc.
+ * Author: Jianxin Pan <jianxin.pan@amlogic.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/io.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <dt-bindings/power/meson-a1-power.h>
+#include <linux/arm-smccc.h>
+#include <linux/firmware/meson/meson_sm.h>
+
+#define PWRC_ON		1
+#define PWRC_OFF	0
+
+struct meson_secure_pwrc_domain {
+	struct generic_pm_domain base;
+	unsigned int index;
+	struct meson_secure_pwrc *pwrc;
+};
+
+struct meson_secure_pwrc {
+	struct meson_secure_pwrc_domain *domains;
+	struct genpd_onecell_data xlate;
+	struct meson_sm_firmware *fw;
+};
+
+struct meson_secure_pwrc_domain_desc {
+	unsigned int index;
+	unsigned int flags;
+	char *name;
+	bool (*is_off)(struct meson_secure_pwrc_domain *pwrc_domain);
+};
+
+struct meson_secure_pwrc_domain_data {
+	unsigned int count;
+	struct meson_secure_pwrc_domain_desc *domains;
+};
+
+static bool pwrc_secure_is_off(struct meson_secure_pwrc_domain *pwrc_domain)
+{
+	int sts = 1;
+
+	if (meson_sm_call(pwrc_domain->pwrc->fw, SM_PWRC_GET, &sts,
+			  pwrc_domain->index, 0, 0, 0, 0) < 0)
+		pr_err("failed to get power domain status\n");
+
+	return !!sts;
+}
+
+static int meson_secure_pwrc_off(struct generic_pm_domain *domain)
+{
+	int sts = 0;
+	struct meson_secure_pwrc_domain *pwrc_domain =
+		container_of(domain, struct meson_secure_pwrc_domain, base);
+
+	if (meson_sm_call(pwrc_domain->pwrc->fw, SM_PWRC_SET, NULL,
+	    pwrc_domain->index, PWRC_OFF, 0, 0, 0) < 0) {
+		pr_err("failed to set power domain off\n");
+		sts = -EINVAL;
+	}
+
+	return sts;
+}
+
+static int meson_secure_pwrc_on(struct generic_pm_domain *domain)
+{
+	int sts = 0;
+	struct meson_secure_pwrc_domain *pwrc_domain =
+		container_of(domain, struct meson_secure_pwrc_domain, base);
+
+	if (meson_sm_call(pwrc_domain->pwrc->fw, SM_PWRC_SET, NULL,
+	    pwrc_domain->index, PWRC_ON, 0, 0, 0) < 0) {
+		pr_err("failed to set power domain on\n");
+		sts = -EINVAL;
+	}
+
+	return sts;
+}
+
+#define SEC_PD(__name, __flag)			\
+[PWRC_##__name##_ID] =				\
+{						\
+	.name = #__name,			\
+	.index = PWRC_##__name##_ID,		\
+	.is_off = pwrc_secure_is_off,	\
+	.flags = __flag,			\
+}
+
+static struct meson_secure_pwrc_domain_desc a1_pwrc_domains[] = {
+	SEC_PD(DSPA,	0),
+	SEC_PD(DSPB,	0),
+	/* UART should keep working in ATF after suspend and before resume */
+	SEC_PD(UART,	GENPD_FLAG_ALWAYS_ON),
+	/* DMC is for DDR PHY ana/dig and DMC, and should be always on */
+	SEC_PD(DMC,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(I2C,	0),
+	SEC_PD(PSRAM,	0),
+	SEC_PD(ACODEC,	0),
+	SEC_PD(AUDIO,	0),
+	SEC_PD(OTP,	0),
+	SEC_PD(DMA,	0),
+	SEC_PD(SD_EMMC,	0),
+	SEC_PD(RAMA,	0),
+	/* SRAMB is used as AFT runtime memory, and should be always on */
+	SEC_PD(RAMB,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(IR,	0),
+	SEC_PD(SPICC,	0),
+	SEC_PD(SPIFC,	0),
+	SEC_PD(USB,	0),
+	/* NIC is for NIC400, and should be always on */
+	SEC_PD(NIC,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(PDMIN,	0),
+	SEC_PD(RSA,	0),
+};
+
+static int meson_secure_pwrc_probe(struct platform_device *pdev)
+{
+	int i;
+	struct device_node *sm_np;
+	struct meson_secure_pwrc *pwrc;
+	const struct meson_secure_pwrc_domain_data *match;
+
+	match = of_device_get_match_data(&pdev->dev);
+	if (!match) {
+		dev_err(&pdev->dev, "failed to get match data\n");
+		return -ENODEV;
+	}
+
+	sm_np = of_parse_phandle(pdev->dev.of_node, "secure-monitor", 0);
+	if (!sm_np) {
+		dev_err(&pdev->dev, "no secure-monitor node\n");
+		return -ENODEV;
+	}
+
+	pwrc = devm_kzalloc(&pdev->dev, sizeof(*pwrc), GFP_KERNEL);
+	if (!pwrc)
+		return -ENOMEM;
+
+	pwrc->fw = meson_sm_get(sm_np);
+	of_node_put(sm_np);
+	if (!pwrc->fw)
+		return -EPROBE_DEFER;
+
+	pwrc->xlate.domains = devm_kcalloc(&pdev->dev, match->count,
+					   sizeof(*pwrc->xlate.domains),
+					   GFP_KERNEL);
+	if (!pwrc->xlate.domains)
+		return -ENOMEM;
+
+	pwrc->domains = devm_kcalloc(&pdev->dev, match->count,
+				     sizeof(*pwrc->domains), GFP_KERNEL);
+	if (!pwrc->domains)
+		return -ENOMEM;
+
+	pwrc->xlate.num_domains = match->count;
+	platform_set_drvdata(pdev, pwrc);
+
+	for (i = 0 ; i < match->count ; ++i) {
+		struct meson_secure_pwrc_domain *dom = &pwrc->domains[i];
+
+		if (!match->domains[i].index)
+			continue;
+
+		dom->pwrc = pwrc;
+		dom->index = match->domains[i].index;
+		dom->base.name = match->domains[i].name;
+		dom->base.flags = match->domains[i].flags;
+		dom->base.power_on = meson_secure_pwrc_on;
+		dom->base.power_off = meson_secure_pwrc_off;
+
+		pm_genpd_init(&dom->base, NULL, match->domains[i].is_off(dom));
+
+		pwrc->xlate.domains[i] = &dom->base;
+	}
+
+	return of_genpd_add_provider_onecell(pdev->dev.of_node, &pwrc->xlate);
+}
+
+static struct meson_secure_pwrc_domain_data meson_secure_a1_pwrc_data = {
+	.domains = a1_pwrc_domains,
+	.count = ARRAY_SIZE(a1_pwrc_domains),
+};
+
+static const struct of_device_id meson_secure_pwrc_match_table[] = {
+	{
+		.compatible = "amlogic,meson-a1-pwrc",
+		.data = &meson_secure_a1_pwrc_data,
+	},
+	{ /* sentinel */ }
+};
+
+static struct platform_driver meson_secure_pwrc_driver = {
+	.probe = meson_secure_pwrc_probe,
+	.driver = {
+		.name		= "meson_secure_pwrc",
+		.of_match_table	= meson_secure_pwrc_match_table,
+	},
+};
+builtin_platform_driver(meson_secure_pwrc_driver);
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 4/4] arm64: dts: meson: a1: add secure power domain controller

[Jianxin Pan]

Enable power domain controller for Meson A1 SoC.

Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index 7210ad0..081bc31 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/meson-a1-power.h>
 
 / {
 	compatible = "amlogic,a1";
@@ -93,6 +94,13 @@
 				clock-names = "xtal", "pclk", "baud";
 				status = "disabled";
 			};
+
+			pwrc: power-controller {
+				compatible = "amlogic,meson-a1-pwrc";
+				#power-domain-cells = <1>;
+				secure-monitor = <&sm>;
+				status = "okay";
+			};
 		};
 
 		gic: interrupt-controller@ff901000 {
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 1/4] dt-bindings: power: add Amlogic secure power domains bindings

[Rob Herring]

On Fri, Oct 18, 2019 at 05:32:44PM +0800, Jianxin Pan wrote:
> Add the bindings for the Amlogic Secure power domains, controlling the
> secure power domains.
> 
> The bindings targets the Amlogic A1 and C1 compatible SoCs, in which the
> power domain registers are in secure world.
> 
> Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
> ---
>  .../bindings/power/amlogic,meson-sec-pwrc.yaml     | 42 ++++++++++++++++++++++
>  include/dt-bindings/power/meson-a1-power.h         | 32 +++++++++++++++++
>  2 files changed, 74 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
>  create mode 100644 include/dt-bindings/power/meson-a1-power.h
> 
> diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
> new file mode 100644
> index 00000000..88d8261
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
> @@ -0,0 +1,42 @@
> +# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +# Copyright (c) 2019 Amlogic, Inc
> +# Author: Jianxin Pan <jianxin.pan@amlogic.com>
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/power/amlogic,meson-sec-pwrc.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Amlogic Meson Secure Power Domains
> +
> +maintainers:
> +  - Jianxin Pan <jianxin.pan@amlogic.com>
> +
> +description: |+
> +  Meson Secure Power Domains used in A1/C1 SoCs.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - amlogic,meson-a1-pwrc
> +
> +  "#power-domain-cells":
> +    const: 1
> +
> +  secure-monitor:
> +    description: phandle to the secure-monitor node
> +    $ref: /schemas/types.yaml#/definitions/phandle

Like the watchdog, make this a child or the secure firmware node. Or 
just add '#power-domain-cells' to it. You don't really need a child node 
here if there's not other resources in DT for this.

Rob

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 1/4] dt-bindings: power: add Amlogic secure power domains bindings

[Jianxin Pan]

Hi Jerome,

Could you give some advice about this?

In a1/c1, watchdog and powerdomain are the same, they use secure monitor [0] and
there is no share memory needed.

[0]
https://lore.kernel.org/linux-amlogic/20190731082339.20163-1-ccaione@baylibre.com/

On 2019/10/29 10:01, Rob Herring wrote:
> On Fri, Oct 18, 2019 at 05:32:44PM +0800, Jianxin Pan wrote:
>> Add the bindings for the Amlogic Secure power domains, controlling the
>> secure power domains.
>>
>> The bindings targets the Amlogic A1 and C1 compatible SoCs, in which the
>> power domain registers are in secure world.
>>
>> Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
>> ---
>>  .../bindings/power/amlogic,meson-sec-pwrc.yaml     | 42 ++++++++++++++++++++++
>>  include/dt-bindings/power/meson-a1-power.h         | 32 +++++++++++++++++
>>  2 files changed, 74 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
>>  create mode 100644 include/dt-bindings/power/meson-a1-power.h
>>
>> diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
>> new file mode 100644
>> index 00000000..88d8261
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
>> @@ -0,0 +1,42 @@
>> +# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +# Copyright (c) 2019 Amlogic, Inc
>> +# Author: Jianxin Pan <jianxin.pan@amlogic.com>
>> +%YAML 1.2
>> +---
>> +$id: "http://devicetree.org/schemas/power/amlogic,meson-sec-pwrc.yaml#"
>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
>> +
>> +title: Amlogic Meson Secure Power Domains
>> +
>> +maintainers:
>> +  - Jianxin Pan <jianxin.pan@amlogic.com>
>> +
>> +description: |+
>> +  Meson Secure Power Domains used in A1/C1 SoCs.
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - amlogic,meson-a1-pwrc
>> +
>> +  "#power-domain-cells":
>> +    const: 1
>> +
>> +  secure-monitor:
>> +    description: phandle to the secure-monitor node
>> +    $ref: /schemas/types.yaml#/definitions/phandle
> 
> Like the watchdog, make this a child or the secure firmware node. Or 
> just add '#power-domain-cells' to it. You don't really need a child node 
> here if there's not other resources in DT for this.
> 
> Rob
> 
> .
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel