From: Joakim Zhang <qiangqing.zhang@nxp.com>
To: maz@kernel.org, jason@lakedaemon.net, tglx@linutronix.de,
robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org,
s.hauer@pengutronix.de
Cc: devicetree@vger.kernel.org, fugang.duan@nxp.com,
linux-kernel@vger.kernel.org,
Joakim Zhang <qiangqing.zhang@nxp.com>,
linux-imx@nxp.com, kernel@pengutronix.de, festevam@gmail.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH V4 RESEND 1/2] dt-bindings/irq: add binding for NXP INTMUX interrupt multiplexer
Date: Mon, 13 Jan 2020 15:08:40 +0800 [thread overview]
Message-ID: <1578899321-1365-2-git-send-email-qiangqing.zhang@nxp.com> (raw)
In-Reply-To: <1578899321-1365-1-git-send-email-qiangqing.zhang@nxp.com>
This patch adds the DT bindings for the NXP INTMUX interrupt multiplexer
for i.MX8 family SoCs.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
---
.../interrupt-controller/fsl,intmux.yaml | 77 +++++++++++++++++++
1 file changed, 77 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
new file mode 100644
index 000000000000..4dba532fe0bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,intmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale INTMUX interrupt multiplexer
+
+maintainers:
+ - Marc Zyngier <maz@kernel.org>
+
+properties:
+ compatible:
+ items:
+ const: fsl,imx-intmux
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 8
+ description: |
+ Should contain the parent interrupt lines (up to 8) used to multiplex
+ the input interrupts.
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ clocks:
+ maxItems: 1
+ description: ipg clock.
+
+ clock-names:
+ items:
+ const: ipg
+
+ fsl,intmux_chans:
+ maxItems: 1
+ description: |
+ The number of channels used for interrupt source. The Maximum value is 8.
+ If this property is not set in DT then driver uses 1 channel by default.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - clocks
+ - clock-name
+ - fsl,intmux_chans
+
+additionalProperties: false
+
+Example:
+
+ intmux@37400000 {
+ compatible = "fsl,imx-intmux";
+ reg = <0x37400000 0x1000>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&clk IMX8QM_CM40_IPG_CLK>;
+ clock-names = "ipg";
+ fsl,intmux_chans = <8>;
+ };
+
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-01-13 7:13 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-13 7:08 [PATCH V4 RESEND 0/2] irqchip: add NXP INTMUX interrupt controller Joakim Zhang
2020-01-13 7:08 ` Joakim Zhang [this message]
2020-01-13 9:16 ` [PATCH V4 RESEND 1/2] dt-bindings/irq: add binding for NXP INTMUX interrupt multiplexer Marc Zyngier
2020-01-13 9:59 ` Joakim Zhang
2020-01-13 21:03 ` Rob Herring
2020-01-14 2:43 ` Joakim Zhang
2020-01-14 8:22 ` Joakim Zhang
2020-01-14 14:11 ` Rob Herring
2020-01-15 2:27 ` Joakim Zhang
2020-01-13 7:08 ` [PATCH V4 RESEND 2/2] drivers/irqchip: add NXP INTMUX interrupt multiplexer support Joakim Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1578899321-1365-2-git-send-email-qiangqing.zhang@nxp.com \
--to=qiangqing.zhang@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=fugang.duan@nxp.com \
--cc=jason@lakedaemon.net \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=maz@kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).