From: Jolly Shah <jolly.shah@xilinx.com>
To: ard.biesheuvel@linaro.org, mingo@kernel.org,
gregkh@linuxfoundation.org, matt@codeblueprint.co.uk,
sudeep.holla@arm.com, hkallweit1@gmail.com,
keescook@chromium.org, dmitry.torokhov@gmail.com,
michal.simek@xilinx.com
Cc: Jolly Shah <jolly.shah@xilinx.com>,
Rajan Vaja <rajan.vaja@xilinx.com>,
rajanv@xilinx.com, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 20/25] firmware: xilinx: Remove eemi ops for fpga related APIs
Date: Thu, 9 Apr 2020 12:12:09 -0700 [thread overview]
Message-ID: <1586459534-8997-21-git-send-email-jolly.shah@xilinx.com> (raw)
In-Reply-To: <1586459534-8997-1-git-send-email-jolly.shah@xilinx.com>
From: Rajan Vaja <rajan.vaja@xilinx.com>
Use direct function call instead of using eemi ops for fpga related
APIs. Also remove eemi ops structure.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
---
drivers/firmware/xilinx/zynqmp.c | 30 ++----------------------------
drivers/fpga/zynqmp-fpga.c | 12 ++----------
drivers/spi/spi-zynqmp-gqspi.c | 5 -----
include/linux/firmware/xlnx-zynqmp.h | 16 +++++++++++-----
4 files changed, 15 insertions(+), 48 deletions(-)
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index e6e7b63..ef7ba32 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -24,8 +24,6 @@
#include <linux/firmware/xlnx-zynqmp.h>
#include "zynqmp-debug.h"
-static const struct zynqmp_eemi_ops *eemi_ops_tbl;
-
static bool feature_check_enabled;
static u32 zynqmp_pm_features[PM_API_MAX];
@@ -671,8 +669,7 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_reset_get_status);
*
* Return: Returns status, either success or error+reason
*/
-static int zynqmp_pm_fpga_load(const u64 address, const u32 size,
- const u32 flags)
+int zynqmp_pm_fpga_load(const u64 address, const u32 size, const u32 flags)
{
return zynqmp_pm_invoke_fn(PM_FPGA_LOAD, lower_32_bits(address),
upper_32_bits(address), size, flags, NULL);
@@ -687,7 +684,7 @@ static int zynqmp_pm_fpga_load(const u64 address, const u32 size,
*
* Return: Returns status, either success or error+reason
*/
-static int zynqmp_pm_fpga_get_status(u32 *value)
+int zynqmp_pm_fpga_get_status(u32 *value)
{
u32 ret_payload[PAYLOAD_ARG_CNT];
int ret;
@@ -812,26 +809,6 @@ int zynqmp_pm_aes_engine(const u64 address, u32 *out)
}
EXPORT_SYMBOL_GPL(zynqmp_pm_aes_engine);
-static const struct zynqmp_eemi_ops eemi_ops = {
- .fpga_load = zynqmp_pm_fpga_load,
- .fpga_get_status = zynqmp_pm_fpga_get_status,
-};
-
-/**
- * zynqmp_pm_get_eemi_ops - Get eemi ops functions
- *
- * Return: Pointer of eemi_ops structure
- */
-const struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)
-{
- if (eemi_ops_tbl)
- return eemi_ops_tbl;
- else
- return ERR_PTR(-EPROBE_DEFER);
-
-}
-EXPORT_SYMBOL_GPL(zynqmp_pm_get_eemi_ops);
-
static int zynqmp_firmware_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -878,9 +855,6 @@ static int zynqmp_firmware_probe(struct platform_device *pdev)
pr_info("%s Trustzone version v%d.%d\n", __func__,
pm_tz_version >> 16, pm_tz_version & 0xFFFF);
- /* Assign eemi_ops_table */
- eemi_ops_tbl = &eemi_ops;
-
zynqmp_pm_api_debugfs_init();
ret = mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE, firmware_devs,
diff --git a/drivers/fpga/zynqmp-fpga.c b/drivers/fpga/zynqmp-fpga.c
index b8a88d2..5be8685 100644
--- a/drivers/fpga/zynqmp-fpga.c
+++ b/drivers/fpga/zynqmp-fpga.c
@@ -40,16 +40,12 @@ static int zynqmp_fpga_ops_write_init(struct fpga_manager *mgr,
static int zynqmp_fpga_ops_write(struct fpga_manager *mgr,
const char *buf, size_t size)
{
- const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
struct zynqmp_fpga_priv *priv;
dma_addr_t dma_addr;
u32 eemi_flags = 0;
char *kbuf;
int ret;
- if (IS_ERR_OR_NULL(eemi_ops) || !eemi_ops->fpga_load)
- return -ENXIO;
-
priv = mgr->priv;
kbuf = dma_alloc_coherent(priv->dev, size, &dma_addr, GFP_KERNEL);
@@ -63,7 +59,7 @@ static int zynqmp_fpga_ops_write(struct fpga_manager *mgr,
if (priv->flags & FPGA_MGR_PARTIAL_RECONFIG)
eemi_flags |= XILINX_ZYNQMP_PM_FPGA_PARTIAL;
- ret = eemi_ops->fpga_load(dma_addr, size, eemi_flags);
+ ret = zynqmp_pm_fpga_load(dma_addr, size, eemi_flags);
dma_free_coherent(priv->dev, size, kbuf, dma_addr);
@@ -78,13 +74,9 @@ static int zynqmp_fpga_ops_write_complete(struct fpga_manager *mgr,
static enum fpga_mgr_states zynqmp_fpga_ops_state(struct fpga_manager *mgr)
{
- const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
u32 status;
- if (IS_ERR_OR_NULL(eemi_ops) || !eemi_ops->fpga_get_status)
- return FPGA_MGR_STATE_UNKNOWN;
-
- eemi_ops->fpga_get_status(&status);
+ zynqmp_pm_fpga_get_status(&status);
if (status & IXR_FPGA_DONE_MASK)
return FPGA_MGR_STATE_OPERATING;
diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index 7412a30..811c97a 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -135,7 +135,6 @@
#define SPI_AUTOSUSPEND_TIMEOUT 3000
enum mode_type {GQSPI_MODE_IO, GQSPI_MODE_DMA};
-static const struct zynqmp_eemi_ops *eemi_ops;
/**
* struct zynqmp_qspi - Defines qspi driver instance
@@ -1015,10 +1014,6 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
struct zynqmp_qspi *xqspi;
struct device *dev = &pdev->dev;
- eemi_ops = zynqmp_pm_get_eemi_ops();
- if (IS_ERR(eemi_ops))
- return PTR_ERR(eemi_ops);
-
master = spi_alloc_master(&pdev->dev, sizeof(*xqspi));
if (!master)
return -ENOMEM;
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 11d7aef..44ffb4f 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -293,16 +293,11 @@ struct zynqmp_pm_query_data {
u32 arg3;
};
-struct zynqmp_eemi_ops {
- int (*fpga_load)(const u64 address, const u32 size, const u32 flags);
- int (*fpga_get_status)(u32 *value);
-};
int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
u32 arg2, u32 arg3, u32 *ret_payload);
#if IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE)
-const struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void);
int zynqmp_pm_get_api_version(u32 *version);
int zynqmp_pm_get_chipid(u32 *idcode, u32 *version);
int zynqmp_pm_query_data(struct zynqmp_pm_query_data qdata, u32 *out);
@@ -333,6 +328,8 @@ int zynqmp_pm_set_requirement(const u32 node, const u32 capabilities,
const u32 qos,
const enum zynqmp_pm_request_ack ack);
int zynqmp_pm_aes_engine(const u64 address, u32 *out);
+int zynqmp_pm_fpga_load(const u64 address, const u32 size, const u32 flags);
+int zynqmp_pm_fpga_get_status(u32 *value);
#else
static inline struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)
{
@@ -450,6 +447,15 @@ static inline int zynqmp_pm_aes_engine(const u64 address, u32 *out)
{
return -ENODEV;
}
+static inline int zynqmp_pm_fpga_load(const u64 address, const u32 size,
+ const u32 flags)
+{
+ return -ENODEV;
+}
+static inline int zynqmp_pm_fpga_get_status(u32 *value)
+{
+ return -ENODEV;
+}
#endif
#endif /* __FIRMWARE_ZYNQMP_H__ */
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-04-09 19:16 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-09 19:11 [PATCH v4 00/25] firmware: xilinx: Add xilinx specific sysfs interface Jolly Shah
2020-04-09 19:11 ` [PATCH v4 01/25] firmware: xilinx: Remove eemi ops for get_api_version Jolly Shah
2020-04-09 19:11 ` [PATCH v4 02/25] firmware: xilinx: Remove eemi ops for get_chipid Jolly Shah
2020-04-09 19:11 ` [PATCH v4 03/25] firmware: xilinx: Remove eemi ops for query_data Jolly Shah
2020-04-09 19:11 ` [PATCH v4 04/25] firmware: xilinx: Remove eemi ops for clock_enable Jolly Shah
2020-04-09 19:11 ` [PATCH v4 05/25] firmware: xilinx: Remove eemi ops for clock_disable Jolly Shah
2020-04-09 19:11 ` [PATCH v4 06/25] firmware: xilinx: Remove eemi ops for clock_getstate Jolly Shah
2020-04-09 19:11 ` [PATCH v4 07/25] firmware: xilinx: Remove eemi ops for clock_setdivider Jolly Shah
2020-04-09 19:11 ` [PATCH v4 08/25] firmware: xilinx: Remove eemi ops for clock_getdivider Jolly Shah
2020-04-09 19:11 ` [PATCH v4 09/25] firmware: xilinx: Remove eemi ops for clock set/get rate Jolly Shah
2020-04-09 19:11 ` [PATCH v4 10/25] firmware: xilinx: Remove eemi ops for clock set/get parent Jolly Shah
2020-04-09 19:12 ` [PATCH v4 11/25] firmware: xilinx: Use APIs instead of IOCTLs Jolly Shah
2020-04-09 19:12 ` [PATCH v4 12/25] firmware: xilinx: Remove eemi ops for reset_assert Jolly Shah
2020-04-09 19:12 ` [PATCH v4 13/25] firmware: xilinx: Remove eemi ops for reset_get_status Jolly Shah
2020-04-09 19:12 ` [PATCH v4 14/25] firmware: xilinx: Remove eemi ops for init_finalize Jolly Shah
2020-04-09 19:12 ` [PATCH v4 15/25] firmware: xilinx: Remove eemi ops for set_suspend_mode Jolly Shah
2020-04-09 19:12 ` [PATCH v4 16/25] firmware: xilinx: Remove eemi ops for request_node Jolly Shah
2020-04-09 19:12 ` [PATCH v4 17/25] firmware: xilinx: Remove eemi ops for release_node Jolly Shah
2020-04-09 19:12 ` [PATCH v4 18/25] firmware: xilinx: Remove eemi ops for set_requirement Jolly Shah
2020-04-09 19:12 ` [PATCH v4 19/25] firmware: xilinx: Remove eemi ops for aes engine Jolly Shah
2020-04-09 19:12 ` Jolly Shah [this message]
2020-04-09 19:12 ` [PATCH v4 21/25] firmware: xilinx: Add APIs to read/write GGS/PGGS registers Jolly Shah
2020-04-09 19:12 ` [PATCH v4 22/25] firmware: xilinx: Add sysfs interface Jolly Shah
2020-04-09 19:12 ` [PATCH v4 23/25] firmware: xilinx: Add system shutdown API interface Jolly Shah
2020-04-09 19:12 ` [PATCH v4 24/25] firmware: xilinx: Add sysfs to set shutdown scope Jolly Shah
2020-04-09 19:12 ` [PATCH v4 25/25] firmware: xilinx: Add sysfs and API to set boot health status Jolly Shah
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1586459534-8997-21-git-send-email-jolly.shah@xilinx.com \
--to=jolly.shah@xilinx.com \
--cc=ard.biesheuvel@linaro.org \
--cc=dmitry.torokhov@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=hkallweit1@gmail.com \
--cc=keescook@chromium.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=matt@codeblueprint.co.uk \
--cc=michal.simek@xilinx.com \
--cc=mingo@kernel.org \
--cc=rajan.vaja@xilinx.com \
--cc=rajanv@xilinx.com \
--cc=sudeep.holla@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).