From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.2 required=3.0 tests=DKIMWL_WL_HIGH,DKIM_SIGNED, DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, MENTIONS_GIT_HOSTING,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS,UNPARSEABLE_RELAY, URIBL_BLOCKED,USER_AGENT_SANE_2 autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 0DA3CC54E49 for ; Thu, 7 May 2020 12:46:51 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id D4D1C207DD for ; Thu, 7 May 2020 12:46:50 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="F5db61zP"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=mediatek.com header.i=@mediatek.com header.b="seEm0ytv" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org D4D1C207DD Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=mediatek.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+infradead-linux-arm-kernel=archiver.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Date:To:From:Subject:Message-ID:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=GDjBb6D9L255wTozAL2jeFxSReMyoycXqhvtIO6bmpI=; b=F5db61zPenDlOB 7GJD2YyLoAoZmqWm3JrVqh2neR2zAqLuf3/NKVZEHpzM8s8x85fwpirGfq0321PFjpNFVpYUFGkp5 6HHODC0wvQYtBuZnh7EUEt0yH7+9rtGM1j4rZmpgLlbS/yQSy7VOBuzDpLtvwz0ezX78/6mW2bETJ F/1rC1tJWpKfifrsz4+R/M1gSyBcI+cw7nMNvZ4gaTaXwrSJBtB4CzUJ6MW/hz7ynO1TzDZrisCE5 57tn9VE+UaJflR+98/FT4eikLVyozMk6DDhp3n3ZyEN05mq3vqT5i8GMoXfmF+fZHXdKWTnpOIXAM 9fVbFHuGGMlps+0fG2lg==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1jWfvK-0003HV-LP; Thu, 07 May 2020 12:46:46 +0000 Received: from mailgw02.mediatek.com ([216.200.240.185]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1jWfvG-0003GJ-LV; Thu, 07 May 2020 12:46:45 +0000 X-UUID: 419f2917e13f4f6586e3b2ac53bf1e38-20200507 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=mediatek.com; s=dk; h=Content-Transfer-Encoding:MIME-Version:Content-Type:References:In-Reply-To:Date:CC:To:From:Subject:Message-ID; bh=Cnyq0ap0od9ETjikpOiyNssrJ6H77vhRUTGnWmVzp7A=; b=seEm0ytv0D8UIHGeeOoS923kMDaWmUNcbSH9qqaeMjW0Qkn/cLupSrllSiFyksHap1XZ7Q1c7vQbVdiXhc4L3aaxXEz0H8y78yYukG0DZkNtm0CrvOYGOkwuTvh9zAURRUhdga5YYJzUesxjS/V640jThTmH9KVMEd84Jek1JaM=; X-UUID: 419f2917e13f4f6586e3b2ac53bf1e38-20200507 Received: from mtkcas66.mediatek.inc [(172.29.193.44)] by mailgw02.mediatek.com (envelope-from ) (musrelay.mediatek.com ESMTP with TLS) with ESMTP id 1623575976; Thu, 07 May 2020 04:46:38 -0800 Received: from MTKMBS31N1.mediatek.inc (172.27.4.69) by MTKMBS62N1.mediatek.inc (172.29.193.41) with Microsoft SMTP Server (TLS) id 15.0.1497.2; Thu, 7 May 2020 05:46:31 -0700 Received: from MTKCAS36.mediatek.inc (172.27.4.186) by MTKMBS31N1.mediatek.inc (172.27.4.69) with Microsoft SMTP Server (TLS) id 15.0.1497.2; Thu, 7 May 2020 20:46:28 +0800 Received: from [10.17.3.153] (10.17.3.153) by MTKCAS36.mediatek.inc (172.27.4.170) with Microsoft SMTP Server id 15.0.1497.2 via Frontend Transport; Thu, 7 May 2020 20:46:29 +0800 Message-ID: <1588855524.8804.168.camel@mhfsdcap03> Subject: Re: [V5, 2/2] media: i2c: dw9768: Add DW9768 VCM driver From: Dongchun Zhu To: Sakari Ailus Date: Thu, 7 May 2020 20:45:24 +0800 In-Reply-To: <20200506151352.GZ9190@paasikivi.fi.intel.com> References: <20200502161727.30463-1-dongchun.zhu@mediatek.com> <20200502161727.30463-3-dongchun.zhu@mediatek.com> <20200506151352.GZ9190@paasikivi.fi.intel.com> X-Mailer: Evolution 3.10.4-0ubuntu2 MIME-Version: 1.0 X-TM-SNTS-SMTP: D1FAE596B3EA16B283DDB710A97CBE78338F679B1D408994C1DC7D551E3354D82000:8 X-MTK: N X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200507_054642_721136_C5392058 X-CRM114-Status: GOOD ( 30.01 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: mark.rutland@arm.com, drinkcat@chromium.org, andriy.shevchenko@linux.intel.com, srv_heupstream@mediatek.com, devicetree@vger.kernel.org, linus.walleij@linaro.org, shengnan.wang@mediatek.com, tfiga@chromium.org, bgolaszewski@baylibre.com, sj.huang@mediatek.com, robh+dt@kernel.org, linux-mediatek@lists.infradead.org, louis.kuo@mediatek.com, matthias.bgg@gmail.com, bingbu.cao@intel.com, mchehab@kernel.org, linux-arm-kernel@lists.infradead.org, linux-media@vger.kernel.org Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+infradead-linux-arm-kernel=archiver.kernel.org@lists.infradead.org Hi Sakari, Thanks for the review. On Wed, 2020-05-06 at 18:13 +0300, Sakari Ailus wrote: > Hi Dongchun, > > On Sun, May 03, 2020 at 12:17:27AM +0800, Dongchun Zhu wrote: > > Add a V4L2 sub-device driver for DW9768 voice coil motor, providing > > control to set the desired focus via IIC serial interface. > > > > Signed-off-by: Dongchun Zhu > > --- > > MAINTAINERS | 1 + > > drivers/media/i2c/Kconfig | 11 ++ > > drivers/media/i2c/Makefile | 1 + > > drivers/media/i2c/dw9768.c | 440 +++++++++++++++++++++++++++++++++++++++++++++ > > 4 files changed, 453 insertions(+) > > create mode 100644 drivers/media/i2c/dw9768.c > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index 8d72c41..c92dc99 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -5157,6 +5157,7 @@ L: linux-media@vger.kernel.org > > S: Maintained > > T: git git://linuxtv.org/media_tree.git > > F: Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml > > +F: drivers/media/i2c/dw9768.c > > > > DONGWOON DW9807 LENS VOICE COIL DRIVER > > M: Sakari Ailus > > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig > > index 125d596..6a3f9da 100644 > > --- a/drivers/media/i2c/Kconfig > > +++ b/drivers/media/i2c/Kconfig > > @@ -1040,6 +1040,17 @@ config VIDEO_DW9714 > > capability. This is designed for linear control of > > voice coil motors, controlled via I2C serial interface. > > > > +config VIDEO_DW9768 > > + tristate "DW9768 lens voice coil support" > > + depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER > > + depends on VIDEO_V4L2_SUBDEV_API > > Please check how this works in the media tree master branch now --- it's > largely select based. > The actuator driver uses some structures that require the VIDEO_V4L2_SUBDEV_API code, so here we add VIDEO_V4L2_SUBDEV_API dependency to avoid possible build error when it's not enabled. > In general the patch seems fine to me, but please see the other comments > below, too. > > > + depends on PM > > + help > > + This is a driver for the DW9768 camera lens voice coil. > > + DW9768 is a 10 bit DAC with 100mA output current sink > > + capability. This is designed for linear control of > > + voice coil motors, controlled via I2C serial interface. > > + > > config VIDEO_DW9807_VCM > > tristate "DW9807 lens voice coil support" > > depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER > > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile > > index 77bf7d0..4057476 100644 > > --- a/drivers/media/i2c/Makefile > > +++ b/drivers/media/i2c/Makefile > > @@ -24,6 +24,7 @@ obj-$(CONFIG_VIDEO_SAA6752HS) += saa6752hs.o > > obj-$(CONFIG_VIDEO_AD5820) += ad5820.o > > obj-$(CONFIG_VIDEO_AK7375) += ak7375.o > > obj-$(CONFIG_VIDEO_DW9714) += dw9714.o > > +obj-$(CONFIG_VIDEO_DW9768) += dw9768.o > > obj-$(CONFIG_VIDEO_DW9807_VCM) += dw9807-vcm.o > > obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o > > obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o > > diff --git a/drivers/media/i2c/dw9768.c b/drivers/media/i2c/dw9768.c > > new file mode 100644 > > index 0000000..dd68534 > > --- /dev/null > > +++ b/drivers/media/i2c/dw9768.c > > @@ -0,0 +1,440 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +// Copyright (c) 2020 MediaTek Inc. > > + > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > + > > +#define DW9768_NAME "dw9768" > > +#define DW9768_MAX_FOCUS_POS (1024 - 1) > > +/* > > + * This sets the minimum granularity for the focus positions. > > + * A value of 1 gives maximum accuracy for a desired focus position > > + */ > > +#define DW9768_FOCUS_STEPS 1 > > + > > +/* > > + * Ring control and Power control register > > + * Bit[1] RING_EN > > + * 0: Direct mode > > + * 1: AAC mode (ringing control mode) > > + * Bit[0] PD > > + * 0: Normal operation mode > > + * 1: Power down mode > > + * DW9768 requires waiting time of Topr after PD reset takes place. > > + */ > > +#define DW9768_RING_PD_CONTROL_REG 0x02 > > +#define DW9768_PD_MODE_OFF 0x00 > > +#define DW9768_PD_MODE_EN BIT(0) > > +#define DW9768_AAC_MODE_EN BIT(1) > > + > > +/* > > + * DW9768 separates two registers to control the VCM position. > > + * One for MSB value, another is LSB value. > > + * DAC_MSB: D[9:8] (ADD: 0x03) > > + * DAC_LSB: D[7:0] (ADD: 0x04) > > + * D[9:0] DAC data input: positive output current = D[9:0] / 1023 * 100[mA] > > + */ > > +#define DW9768_MSB_ADDR 0x03 > > +#define DW9768_LSB_ADDR 0x04 > > +#define DW9768_STATUS_ADDR 0x05 > > + > > +/* > > + * AAC mode control & prescale register > > + * Bit[7:5] Namely AC[2:0], decide the VCM mode and operation time. > > + * 000 Direct(default) > > + * 001 AAC2 0.48xTvib > > + * 010 AAC3 0.70xTvib > > + * 011 AAC4 0.75xTvib > > + * 100 Reserved > > + * 101 AAC8 1.13xTvib > > + * 110 Reserved > > + * 111 Reserved > > + * Bit[2:0] Namely PRESC[2:0], set the internal clock dividing rate as follow. > > + * 000 2 > > + * 001 1(default) > > + * 010 1/2 > > + * 011 1/4 > > + * 100 8 > > + * 101 4 > > + * 110 Reserved > > + * 111 Reserved > > + */ > > +#define DW9768_AAC_PRESC_REG 0x06 > > +#define DW9768_AAC3_SELECT_DIVIDING_RATE_1 0x41 > > I guess we can start with these values. But I can't think of another option > than putting them into DT if there are differences between what hardware > platforms require. > Let's have a discussion about this. Now these non-default register settings represent one AAC operation mode, this is one option and works for a given lens or a module. If sometime in the future hardware platforms require another different settings, then DT properties may need to be created. > > + > > +/* > > + * VCM period of vibration register > > + * Bit[5:0] Defined as VCM rising periodic time (Tvib) together with PRESC[2:0] > > + * Tvib = (6.3ms + AACT[5:0] * 0.1ms) * Dividing Rate > > + * Dividing Rate is the internal clock dividing rate that is defined at > > + * PRESCALE register (ADD: 0x06) > > + */ > > +#define DW9768_AAC_TIME_REG 0x07 > > +#define DW9768_AACT_CNT 0x39 > > + > > +/* > > + * DW9768 requires waiting time (delay time) of t_OPR after power-up, > > + * or in the case of PD reset taking place. > > + */ > > +#define DW9768_T_OPR_US 1000 > > + > > +/* > > + * This acts as the minimum granularity of lens movement. > > + * Keep this value power of 2, so the control steps can be > > + * uniformly adjusted for gradual lens movement, with desired > > + * number of control steps. > > + */ > > +#define DW9768_MOVE_STEPS 16 > > + > > +/* > > + * DW9768_AAC_PRESC_REG & DW9768_AAC_TIME_REG determine VCM operation time. > > + * If DW9768_AAC_PRESC_REG is 0x41, and DW9768_AAC_TIME_REG is 0x39, VCM mode > > + * would be AAC3, Operation Time would be 0.70xTvib, that is 8.40ms. > > + */ > > +#define DW9768_MOVE_DELAY_US 8400 > > +#define DW9768_STABLE_TIME_US 20000 > > + > > +static const char * const dw9768_supply_names[] = { > > + "vin", /* I2C I/O interface power */ > > + "vdd", /* VCM power */ > > +}; > > + > > +/* dw9768 device structure */ > > +struct dw9768 { > > + struct regulator_bulk_data supplies[ARRAY_SIZE(dw9768_supply_names)]; > > + struct v4l2_ctrl_handler ctrls; > > + struct v4l2_ctrl *focus; > > + struct v4l2_subdev sd; > > +}; > > + > > +static inline struct dw9768 *to_dw9768(struct v4l2_ctrl *ctrl) > > +{ > > + return container_of(ctrl->handler, struct dw9768, ctrls); > > +} > > This is used in a single place. I'd just use container_of() directly there. > Thanks for the reminder. Fixed in next release. > > + > > +static inline struct dw9768 *sd_to_dw9768(struct v4l2_subdev *subdev) > > +{ > > + return container_of(subdev, struct dw9768, sd); > > +} > > + > > +struct regval_list { > > + u8 reg_num; > > + u8 value; > > +}; > > + > > +static const struct regval_list dw9768_init_regs[] = { > > + {DW9768_RING_PD_CONTROL_REG, DW9768_AAC_MODE_EN}, > > + {DW9768_AAC_PRESC_REG, DW9768_AAC3_SELECT_DIVIDING_RATE_1}, > > + {DW9768_AAC_TIME_REG, DW9768_AACT_CNT}, > > +}; > > + > > +static int dw9768_write_array(struct dw9768 *dw9768, > > + const struct regval_list *vals, size_t len) > > +{ > > + struct i2c_client *client = v4l2_get_subdevdata(&dw9768->sd); > > + unsigned int i; > > + int ret; > > + > > + for (i = 0; i < len; i++) { > > + ret = i2c_smbus_write_byte_data(client, vals[i].reg_num, > > + vals[i].value); > > + if (ret < 0) > > + return ret; > > + } > > + return 0; > > +} > > + > > +static int dw9768_set_dac(struct dw9768 *dw9768, u16 val) > > +{ > > + struct i2c_client *client = v4l2_get_subdevdata(&dw9768->sd); > > + > > + /* Write VCM position to registers */ > > + return i2c_smbus_write_word_swapped(client, DW9768_MSB_ADDR, val); > > +} > > + > > +static int dw9768_init(struct dw9768 *dw9768) > > +{ > > + struct i2c_client *client = v4l2_get_subdevdata(&dw9768->sd); > > + int ret, val; > > + > > + /* Reset DW9768_RING_PD_CONTROL_REG to default status 0x00 */ > > + ret = i2c_smbus_write_byte_data(client, DW9768_RING_PD_CONTROL_REG, > > + DW9768_PD_MODE_OFF); > > + if (ret < 0) > > + return ret; > > + > > + /* > > + * DW9769 requires waiting delay time of t_OPR > > + * after PD reset takes place. > > + */ > > + usleep_range(DW9768_T_OPR_US, DW9768_T_OPR_US + 100); > > + > > + ret = dw9768_write_array(dw9768, dw9768_init_regs, > > + ARRAY_SIZE(dw9768_init_regs)); > > + if (ret) > > + return ret; > > + > > + for (val = dw9768->focus->val % DW9768_MOVE_STEPS; > > + val <= dw9768->focus->val; > > + val += DW9768_MOVE_STEPS) { > > + ret = dw9768_set_dac(dw9768, val); > > + if (ret) { > > + dev_err(&client->dev, "%s I2C failure: %d", > > + __func__, ret); > > + return ret; > > + } > > + usleep_range(DW9768_MOVE_DELAY_US, > > + DW9768_MOVE_DELAY_US + 1000); > > + } > > + > > + return 0; > > +} > > + > > +static int dw9768_release(struct dw9768 *dw9768) > > +{ > > + struct i2c_client *client = v4l2_get_subdevdata(&dw9768->sd); > > + int ret, val; > > + > > + val = round_down(dw9768->focus->val, DW9768_MOVE_STEPS); > > + for ( ; val >= 0; val -= DW9768_MOVE_STEPS) { > > + ret = dw9768_set_dac(dw9768, val); > > + if (ret) { > > + dev_err(&client->dev, "I2C write fail: %d", ret); > > + return ret; > > + } > > + usleep_range(DW9768_MOVE_DELAY_US, DW9768_MOVE_DELAY_US + 1000); > > + } > > + > > + /* > > + * Wait for the motor to stabilize after the last movement > > + * to prevent the motor from shaking. > > + */ > > + usleep_range(DW9768_STABLE_TIME_US - DW9768_MOVE_DELAY_US, > > + DW9768_STABLE_TIME_US - DW9768_MOVE_DELAY_US + 1000); > > + > > + ret = i2c_smbus_write_byte_data(client, DW9768_RING_PD_CONTROL_REG, > > + DW9768_PD_MODE_EN); > > + if (ret < 0) > > + return ret; > > + > > + /* > > + * DW9769 requires waiting delay time of t_OPR > > + * after PD reset takes place. > > + */ > > + usleep_range(DW9768_T_OPR_US, DW9768_T_OPR_US + 100); > > + > > + return 0; > > +} > > + > > +static int __maybe_unused dw9768_runtime_suspend(struct device *dev) > > +{ > > + struct i2c_client *client = to_i2c_client(dev); > > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > > + struct dw9768 *dw9768 = sd_to_dw9768(sd); > > + > > + dw9768_release(dw9768); > > + regulator_bulk_disable(ARRAY_SIZE(dw9768_supply_names), > > + dw9768->supplies); > > + > > + return 0; > > +} > > + > > +static int __maybe_unused dw9768_runtime_resume(struct device *dev) > > +{ > > + struct i2c_client *client = to_i2c_client(dev); > > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > > + struct dw9768 *dw9768 = sd_to_dw9768(sd); > > + int ret; > > + > > + ret = regulator_bulk_enable(ARRAY_SIZE(dw9768_supply_names), > > + dw9768->supplies); > > + if (ret < 0) { > > + dev_err(dev, "failed to enable regulators\n"); > > + return ret; > > + } > > + > > + /* > > + * The datasheet refers to t_OPR that needs to be waited before sending > > + * I2C commands after power-up. > > + */ > > + usleep_range(DW9768_T_OPR_US, DW9768_T_OPR_US + 100); > > + > > + ret = dw9768_init(dw9768); > > + if (ret < 0) > > + goto disable_regulator; > > + > > + return 0; > > + > > +disable_regulator: > > + regulator_bulk_disable(ARRAY_SIZE(dw9768_supply_names), > > + dw9768->supplies); > > + > > + return ret; > > +} > > + > > +static int dw9768_set_ctrl(struct v4l2_ctrl *ctrl) > > +{ > > + struct dw9768 *dw9768 = to_dw9768(ctrl); > > + > > + if (ctrl->id == V4L2_CID_FOCUS_ABSOLUTE) > > + return dw9768_set_dac(dw9768, ctrl->val); > > + > > + return 0; > > +} > > + > > +static const struct v4l2_ctrl_ops dw9768_ctrl_ops = { > > + .s_ctrl = dw9768_set_ctrl, > > +}; > > + > > +static int dw9768_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) > > +{ > > + int ret; > > + > > + ret = pm_runtime_get_sync(sd->dev); > > + if (ret < 0) { > > + pm_runtime_put_noidle(sd->dev); > > + return ret; > > + } > > + > > + return 0; > > +} > > + > > +static int dw9768_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) > > +{ > > + pm_runtime_put(sd->dev); > > + > > + return 0; > > +} > > + > > +static const struct v4l2_subdev_internal_ops dw9768_int_ops = { > > + .open = dw9768_open, > > + .close = dw9768_close, > > +}; > > + > > +static const struct v4l2_subdev_ops dw9768_ops = { }; > > + > > +static int dw9768_init_controls(struct dw9768 *dw9768) > > +{ > > + struct v4l2_ctrl_handler *hdl = &dw9768->ctrls; > > + const struct v4l2_ctrl_ops *ops = &dw9768_ctrl_ops; > > + > > + v4l2_ctrl_handler_init(hdl, 1); > > + > > + dw9768->focus = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FOCUS_ABSOLUTE, 0, > > + DW9768_MAX_FOCUS_POS, > > + DW9768_FOCUS_STEPS, 0); > > + > > + if (hdl->error) > > + return hdl->error; > > + > > + dw9768->sd.ctrl_handler = hdl; > > + > > + return 0; > > +} > > + > > +static int dw9768_probe(struct i2c_client *client) > > +{ > > + struct device *dev = &client->dev; > > + struct dw9768 *dw9768; > > + unsigned int i; > > + int ret; > > + > > + dw9768 = devm_kzalloc(dev, sizeof(*dw9768), GFP_KERNEL); > > + if (!dw9768) > > + return -ENOMEM; > > + > > + v4l2_i2c_subdev_init(&dw9768->sd, client, &dw9768_ops); > > + > > + for (i = 0; i < ARRAY_SIZE(dw9768_supply_names); i++) > > + dw9768->supplies[i].supply = dw9768_supply_names[i]; > > + > > + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(dw9768_supply_names), > > + dw9768->supplies); > > + if (ret) { > > + dev_err(dev, "failed to get regulators\n"); > > + return ret; > > + } > > + > > + ret = dw9768_init_controls(dw9768); > > + if (ret) > > + goto entity_cleanup; > > + > > + dw9768->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; > > + dw9768->sd.internal_ops = &dw9768_int_ops; > > + > > + ret = media_entity_pads_init(&dw9768->sd.entity, 0, NULL); > > + if (ret < 0) > > + goto entity_cleanup; > > + > > + dw9768->sd.entity.function = MEDIA_ENT_F_LENS; > > + > > + pm_runtime_enable(dev); > > + if (!pm_runtime_enabled(dev)) { > > + ret = dw9768_runtime_resume(dev); > > + if (ret < 0) { > > + dev_err(dev, "failed to power on: %d\n", ret); > > + goto entity_cleanup; > > + } > > + } > > + > > + ret = v4l2_async_register_subdev(&dw9768->sd); > > + if (ret < 0) > > + goto entity_cleanup; > > + > > + return 0; > > + > > +entity_cleanup: > > + v4l2_ctrl_handler_free(&dw9768->ctrls); > > + media_entity_cleanup(&dw9768->sd.entity); > > + return ret; > > +} > > + > > +static int dw9768_remove(struct i2c_client *client) > > +{ > > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > > + struct dw9768 *dw9768 = sd_to_dw9768(sd); > > + > > + pm_runtime_disable(&client->dev); > > + v4l2_async_unregister_subdev(&dw9768->sd); > > + v4l2_ctrl_handler_free(&dw9768->ctrls); > > + media_entity_cleanup(&dw9768->sd.entity); > > + if (!pm_runtime_status_suspended(&client->dev)) > > + dw9768_runtime_suspend(&client->dev); > > + pm_runtime_set_suspended(&client->dev); > > + > > + return 0; > > +} > > + > > +static const struct of_device_id dw9768_of_table[] = { > > + { .compatible = "dongwoon,dw9768" }, > > + {} > > +}; > > +MODULE_DEVICE_TABLE(of, dw9768_of_table); > > + > > +static const struct dev_pm_ops dw9768_pm_ops = { > > + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, > > + pm_runtime_force_resume) > > + SET_RUNTIME_PM_OPS(dw9768_runtime_suspend, dw9768_runtime_resume, NULL) > > +}; > > + > > +static struct i2c_driver dw9768_i2c_driver = { > > + .driver = { > > + .name = DW9768_NAME, > > + .pm = &dw9768_pm_ops, > > + .of_match_table = dw9768_of_table, > > + }, > > + .probe_new = dw9768_probe, > > + .remove = dw9768_remove, > > +}; > > +module_i2c_driver(dw9768_i2c_driver); > > + > > +MODULE_AUTHOR("Dongchun Zhu "); > > +MODULE_DESCRIPTION("DW9768 VCM driver"); > > +MODULE_LICENSE("GPL v2"); > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel