From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <lgirdwood@gmail.com>, <broonie@kernel.org>
Cc: axel.lin@ingics.com, s.hauer@pengutronix.de,
linux-kernel@vger.kernel.org,
Claudiu Beznea <claudiu.beznea@microchip.com>,
ttynkkynen@nvidia.com, linus.walleij@linaro.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/6] regulator: core: validate selector against linear_min_sel
Date: Fri, 13 Nov 2020 17:21:05 +0200 [thread overview]
Message-ID: <1605280870-32432-2-git-send-email-claudiu.beznea@microchip.com> (raw)
In-Reply-To: <1605280870-32432-1-git-send-email-claudiu.beznea@microchip.com>
There are regulators who's min selector is not zero. Selectors loops
(looping b/w zero and regulator::desc::n_voltages) might throw errors
because invalid selectors are used (lower than
regulator::desc::linear_min_sel). For this situations validate selectors
against regulator::desc::linear_min_sel.
Fixes: 3a40cfc36bb3d ("regulator: core: create unlocked version of regulator_list_voltage")
Fixes: 04eca28cde52c ("regulator: Add helpers for low-level register access")
Fixes: 88cd222b259d6 ("regulator: provide consumer interface for fall/rise time")
Fixes: d295f7670127e ("regulator: core: Move list_voltage_{linear,linear_range,table} to helpers.c")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
drivers/regulator/core.c | 9 +++++++--
drivers/regulator/helpers.c | 3 ++-
2 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 2e1ea18221ef..1d0d35f14f37 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2958,7 +2958,8 @@ static int _regulator_list_voltage(struct regulator_dev *rdev,
return rdev->desc->fixed_uV;
if (ops->list_voltage) {
- if (selector >= rdev->desc->n_voltages)
+ if (selector >= rdev->desc->n_voltages ||
+ selector < rdev->desc->linear_min_sel)
return -EINVAL;
if (lock)
regulator_lock(rdev);
@@ -3109,7 +3110,8 @@ int regulator_list_hardware_vsel(struct regulator *regulator,
struct regulator_dev *rdev = regulator->rdev;
const struct regulator_ops *ops = rdev->desc->ops;
- if (selector >= rdev->desc->n_voltages)
+ if (selector >= rdev->desc->n_voltages ||
+ selector < rdev->desc->linear_min_sel)
return -EINVAL;
if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap)
return -EOPNOTSUPP;
@@ -4032,6 +4034,9 @@ int regulator_set_voltage_time(struct regulator *regulator,
for (i = 0; i < rdev->desc->n_voltages; i++) {
/* We only look for exact voltage matches here */
+ if (i < rdev->desc->linear_min_sel)
+ continue;
+
voltage = regulator_list_voltage(regulator, i);
if (voltage < 0)
return -EINVAL;
diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c
index e4bb09bbd3fa..974f1a63993d 100644
--- a/drivers/regulator/helpers.c
+++ b/drivers/regulator/helpers.c
@@ -647,7 +647,8 @@ int regulator_list_voltage_table(struct regulator_dev *rdev,
return -EINVAL;
}
- if (selector >= rdev->desc->n_voltages)
+ if (selector >= rdev->desc->n_voltages ||
+ selector < rdev->desc->linear_min_sel)
return -EINVAL;
return rdev->desc->volt_table[selector];
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-11-13 15:22 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-13 15:21 [PATCH v3 0/6] regulator: mcp16502: add support for ramp delay Claudiu Beznea
2020-11-13 15:21 ` Claudiu Beznea [this message]
2020-11-24 9:36 ` [PATCH v3 1/6] regulator: core: validate selector against linear_min_sel Jon Hunter
2020-11-24 11:14 ` Claudiu.Beznea
2020-11-24 13:41 ` Jon Hunter
2020-11-25 10:46 ` Claudiu.Beznea
2020-11-24 14:11 ` Mark Brown
2020-11-25 11:34 ` [PATCH] regulator: core: return zero for selectors lower than linear_min_sel Claudiu Beznea
2020-11-25 17:03 ` Mark Brown
2020-11-13 15:21 ` [PATCH v3 2/6] regulator: core: do not continue if selector match Claudiu Beznea
2020-11-13 16:11 ` Mark Brown
2020-11-13 15:21 ` [PATCH v3 3/6] regulator: mcp16502: add linear_min_sel Claudiu Beznea
2020-11-13 15:21 ` [PATCH v3 4/6] regulator: mcp16502: adapt for get/set on other registers Claudiu Beznea
2020-11-13 15:21 ` [PATCH v3 5/6] regulator: mcp16502: add support for ramp delay Claudiu Beznea
2020-11-13 15:21 ` [PATCH v3 6/6] regulator: mcp16502: remove void documentation of struct mcp16502 Claudiu Beznea
2020-11-13 17:14 ` [PATCH v3 0/6] regulator: mcp16502: add support for ramp delay Mark Brown
2020-12-01 13:57 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1605280870-32432-2-git-send-email-claudiu.beznea@microchip.com \
--to=claudiu.beznea@microchip.com \
--cc=axel.lin@ingics.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=ttynkkynen@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).