Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: peng.fan@oss.nxp.com
To: ohad@wizery.com, bjorn.andersson@linaro.org,
	mathieu.poirier@linaro.org, o.rempel@pengutronix.de,
	robh+dt@kernel.org, devicetree@vger.kernel.org
Cc: shawnguo@kernel.org, s.hauer@pengutronix.de,
	kernel@pengutronix.de, festevam@gmail.com,
	linux-remoteproc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>
Subject: [PATCH V5 8/8] remoteproc: imx_rproc: support i.MX8MN/P
Date: Wed, 21 Apr 2021 10:20:22 +0800
Message-ID: <1618971622-30539-9-git-send-email-peng.fan@oss.nxp.com> (raw)
In-Reply-To: <1618971622-30539-1-git-send-email-peng.fan@oss.nxp.com>

From: Peng Fan <peng.fan@nxp.com>

Add i.MX8MN/P remote processor(Cortex-M7) support, we are using ARM
SMCCC to start/stop M core, not using regmap interface.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/remoteproc/imx_rproc.c | 87 +++++++++++++++++++++++++++++++---
 1 file changed, 80 insertions(+), 7 deletions(-)

diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
index d26254609a52..3cb901c87a7d 100644
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@@ -3,6 +3,7 @@
  * Copyright (c) 2017 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
  */
 
+#include <linux/arm-smccc.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
@@ -50,6 +51,11 @@
 
 #define IMX_RPROC_MEM_MAX		32
 
+#define IMX_SIP_RPROC			0xC2000005
+#define IMX_SIP_RPROC_START		0x00
+#define IMX_SIP_RPROC_STARTED		0x01
+#define IMX_SIP_RPROC_STOP		0x02
+
 /**
  * struct imx_rproc_mem - slim internal memory structure
  * @cpu_addr: MPU virtual address of the memory region
@@ -108,6 +114,36 @@ struct imx_rproc {
 	void __iomem			*rsc_table;
 };
 
+static const struct imx_rproc_att imx_rproc_att_imx8mn[] = {
+	/* dev addr , sys addr  , size	    , flags */
+	/* ITCM   */
+	{ 0x00000000, 0x007E0000, 0x00020000, ATT_OWN },
+	/* OCRAM_S */
+	{ 0x00180000, 0x00180000, 0x00009000, 0 },
+	/* OCRAM */
+	{ 0x00900000, 0x00900000, 0x00020000, 0 },
+	/* OCRAM */
+	{ 0x00920000, 0x00920000, 0x00020000, 0 },
+	/* OCRAM */
+	{ 0x00940000, 0x00940000, 0x00050000, 0 },
+	/* QSPI Code - alias */
+	{ 0x08000000, 0x08000000, 0x08000000, 0 },
+	/* DDR (Code) - alias */
+	{ 0x10000000, 0x40000000, 0x0FFE0000, 0 },
+	/* DTCM */
+	{ 0x20000000, 0x00800000, 0x00020000, ATT_OWN },
+	/* OCRAM_S - alias */
+	{ 0x20180000, 0x00180000, 0x00008000, ATT_OWN },
+	/* OCRAM */
+	{ 0x20200000, 0x00900000, 0x00020000, ATT_OWN },
+	/* OCRAM */
+	{ 0x20220000, 0x00920000, 0x00020000, ATT_OWN },
+	/* OCRAM */
+	{ 0x20240000, 0x00940000, 0x00040000, ATT_OWN },
+	/* DDR (Data) */
+	{ 0x40000000, 0x40000000, 0x80000000, 0 },
+};
+
 static const struct imx_rproc_att imx_rproc_att_imx8mq[] = {
 	/* dev addr , sys addr  , size	    , flags */
 	/* TCML - alias */
@@ -194,6 +230,12 @@ static const struct imx_rproc_att imx_rproc_att_imx6sx[] = {
 	{ 0x80000000, 0x80000000, 0x60000000, 0 },
 };
 
+static const struct imx_rproc_dcfg imx_rproc_cfg_imx8mn = {
+	.att		= imx_rproc_att_imx8mn,
+	.att_size	= ARRAY_SIZE(imx_rproc_att_imx8mn),
+	.method		= IMX_RPROC_SMC,
+};
+
 static const struct imx_rproc_dcfg imx_rproc_cfg_imx8mq = {
 	.src_reg	= IMX7D_SRC_SCR,
 	.src_mask	= IMX7D_M4_RST_MASK,
@@ -235,12 +277,24 @@ static int imx_rproc_start(struct rproc *rproc)
 	struct imx_rproc *priv = rproc->priv;
 	const struct imx_rproc_dcfg *dcfg = priv->dcfg;
 	struct device *dev = priv->dev;
+	struct arm_smccc_res res;
 	int ret;
 
-	ret = regmap_update_bits(priv->regmap, dcfg->src_reg,
-				 dcfg->src_mask, dcfg->src_start);
+	switch (dcfg->method) {
+	case IMX_RPROC_MMIO:
+		ret = regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask,
+					 dcfg->src_start);
+		break;
+	case IMX_RPROC_SMC:
+		arm_smccc_smc(IMX_SIP_RPROC, IMX_SIP_RPROC_START, 0, 0, 0, 0, 0, 0, &res);
+		ret = res.a0;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
 	if (ret)
-		dev_err(dev, "Failed to enable M4!\n");
+		dev_err(dev, "Failed to enable remote cores!\n");
 
 	return ret;
 }
@@ -250,15 +304,26 @@ static int imx_rproc_stop(struct rproc *rproc)
 	struct imx_rproc *priv = rproc->priv;
 	const struct imx_rproc_dcfg *dcfg = priv->dcfg;
 	struct device *dev = priv->dev;
+	struct arm_smccc_res res;
 	int ret;
 
-	if (dcfg->method == IMX_RPROC_NONE)
+	switch (dcfg->method) {
+	case IMX_RPROC_MMIO:
+		ret = regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask,
+					 dcfg->src_stop);
+		break;
+	case IMX_RPROC_SMC:
+		arm_smccc_smc(IMX_SIP_RPROC, IMX_SIP_RPROC_STOP, 0, 0, 0, 0, 0, 0, &res);
+		ret = res.a0;
+		if (res.a1)
+			dev_info(dev, "Not in wfi, force stopped\n");
+		break;
+	default:
 		return -EOPNOTSUPP;
+	}
 
-	ret = regmap_update_bits(priv->regmap, dcfg->src_reg,
-				 dcfg->src_mask, dcfg->src_stop);
 	if (ret)
-		dev_err(dev, "Failed to stop M4!\n");
+		dev_err(dev, "Failed to stop remote cores\n");
 
 	return ret;
 }
@@ -594,6 +659,7 @@ static int imx_rproc_detect_mode(struct imx_rproc *priv)
 	const struct imx_rproc_dcfg *dcfg = priv->dcfg;
 	struct device *dev = priv->dev;
 	struct regmap *regmap;
+	struct arm_smccc_res res;
 	int ret;
 	u32 val;
 
@@ -601,6 +667,11 @@ static int imx_rproc_detect_mode(struct imx_rproc *priv)
 	case IMX_RPROC_NONE:
 		priv->rproc->state = RPROC_DETACHED;
 		return 0;
+	case IMX_RPROC_SMC:
+		arm_smccc_smc(IMX_SIP_RPROC, IMX_SIP_RPROC_STARTED, 0, 0, 0, 0, 0, 0, &res);
+		if (res.a0)
+			priv->rproc->state = RPROC_DETACHED;
+		return 0;
 	default:
 		break;
 	}
@@ -751,6 +822,8 @@ static const struct of_device_id imx_rproc_of_match[] = {
 	{ .compatible = "fsl,imx6sx-cm4", .data = &imx_rproc_cfg_imx6sx },
 	{ .compatible = "fsl,imx8mq-cm4", .data = &imx_rproc_cfg_imx8mq },
 	{ .compatible = "fsl,imx8mm-cm4", .data = &imx_rproc_cfg_imx8mq },
+	{ .compatible = "fsl,imx8mn-cm7", .data = &imx_rproc_cfg_imx8mn },
+	{ .compatible = "fsl,imx8mp-cm7", .data = &imx_rproc_cfg_imx8mn },
 	{},
 };
 MODULE_DEVICE_TABLE(of, imx_rproc_of_match);
-- 
2.30.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply index

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-21  2:20 [PATCH V5 0/8] remoteproc: imx_rproc: support i.MX7ULP/8MN/8MP peng.fan
2021-04-21  2:20 ` [PATCH V5 1/8] dt-bindings: remoteproc: imx_rproc: add fsl, auto-boot property peng.fan
2021-04-21  2:20 ` [PATCH V5 2/8] dt-bindings: remoteproc: imx_rproc: add i.MX7ULP support peng.fan
2021-04-21  2:20 ` [PATCH V5 3/8] dt-bindings: remoteproc: imx_rproc: support i.MX8MN/P peng.fan
2021-04-21  2:20 ` [PATCH V5 4/8] remoteproc: imx_rproc: parse fsl,auto-boot peng.fan
2021-04-21  2:20 ` [PATCH V5 5/8] remoteproc: imx_rproc: initial support for mutilple start/stop method peng.fan
2021-05-03 16:30   ` Mathieu Poirier
2021-04-21  2:20 ` [PATCH V5 6/8] remoteproc: imx_rproc: make clk optional peng.fan
2021-04-21  2:20 ` [PATCH V5 7/8] remoteproc: imx_rproc: support i.MX7ULP peng.fan
2021-05-03 16:29   ` Mathieu Poirier
2021-05-06  4:11     ` Peng Fan
2021-04-21  2:20 ` peng.fan [this message]
2021-05-03 16:25   ` [PATCH V5 8/8] remoteproc: imx_rproc: support i.MX8MN/P Mathieu Poirier
2021-04-22 16:56 ` [PATCH V5 0/8] remoteproc: imx_rproc: support i.MX7ULP/8MN/8MP Mathieu Poirier
2021-04-23  1:01   ` Peng Fan
2021-04-23 14:50     ` Mathieu Poirier
2021-04-23 23:28       ` Peng Fan
2021-04-26 15:46         ` Mathieu Poirier
2021-04-26 23:45           ` Peng Fan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1618971622-30539-9-git-send-email-peng.fan@oss.nxp.com \
    --to=peng.fan@oss.nxp.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mathieu.poirier@linaro.org \
    --cc=o.rempel@pengutronix.de \
    --cc=ohad@wizery.com \
    --cc=peng.fan@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git