Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: dillon.minfei@gmail.com
To: festevam@gmail.com, shawnguo@kernel.org, s.riedmueller@phytec.de,
	matthias.schiffer@ew.tq-group.com, leoyang.li@nxp.com,
	arnd@arndb.de, olof@lixom.net, s.hauer@pengutronix.de,
	kernel@pengutronix.de, prabhakar.csengg@gmail.com,
	mchehab@kernel.org
Cc: krzysztof.kozlowski@canonical.com, krzk@kernel.org,
	robh+dt@kernel.org, linux@rempel-privat.de,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-imx@nxp.com,
	linux-media@vger.kernel.org, dillon min <dillon.minfei@gmail.com>
Subject: [PATCH v4 4/4] media: i2c: ov2659: Use clk_{prepare_enable, disable_unprepare}() to set xvclk on/off
Date: Wed, 21 Apr 2021 11:48:58 +0800
Message-ID: <1618976938-20834-5-git-send-email-dillon.minfei@gmail.com> (raw)
In-Reply-To: <1618976938-20834-1-git-send-email-dillon.minfei@gmail.com>

From: dillon min <dillon.minfei@gmail.com>

On some platform(imx6q), xvclk might not switch on in advance,
also for power save purpose, xvclk should not be always on.
so, add clk_prepare_enable(), clk_disable_unprepare() in driver
side to set xvclk on/off at proper stage.

Add following changes:
- add 'struct clk *clk;' in 'struct ov2659 {}'
- enable xvclk in ov2659_power_on()
- disable xvclk in ov2659_power_off()

Signed-off-by: dillon min <dillon.minfei@gmail.com>
---
v4: no changes

 drivers/media/i2c/ov2659.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/media/i2c/ov2659.c b/drivers/media/i2c/ov2659.c
index 42f64175a6df..fb78a1cedc03 100644
--- a/drivers/media/i2c/ov2659.c
+++ b/drivers/media/i2c/ov2659.c
@@ -204,6 +204,7 @@ struct ov2659 {
 	struct i2c_client *client;
 	struct v4l2_ctrl_handler ctrls;
 	struct v4l2_ctrl *link_frequency;
+	struct clk *clk;
 	const struct ov2659_framesize *frame_size;
 	struct sensor_register *format_ctrl_regs;
 	struct ov2659_pll_ctrl pll;
@@ -1270,6 +1271,8 @@ static int ov2659_power_off(struct device *dev)
 
 	gpiod_set_value(ov2659->pwdn_gpio, 1);
 
+	clk_disable_unprepare(ov2659->clk);
+
 	return 0;
 }
 
@@ -1278,9 +1281,17 @@ static int ov2659_power_on(struct device *dev)
 	struct i2c_client *client = to_i2c_client(dev);
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 	struct ov2659 *ov2659 = to_ov2659(sd);
+	int ret;
 
 	dev_dbg(&client->dev, "%s:\n", __func__);
 
+	ret = clk_prepare_enable(ov2659->clk);
+	if (ret) {
+		dev_err(&client->dev, "%s: failed to enable clock\n",
+			__func__);
+		return ret;
+	}
+
 	gpiod_set_value(ov2659->pwdn_gpio, 0);
 
 	if (ov2659->resetb_gpio) {
@@ -1425,7 +1436,6 @@ static int ov2659_probe(struct i2c_client *client)
 	const struct ov2659_platform_data *pdata = ov2659_get_pdata(client);
 	struct v4l2_subdev *sd;
 	struct ov2659 *ov2659;
-	struct clk *clk;
 	int ret;
 
 	if (!pdata) {
@@ -1440,11 +1450,11 @@ static int ov2659_probe(struct i2c_client *client)
 	ov2659->pdata = pdata;
 	ov2659->client = client;
 
-	clk = devm_clk_get(&client->dev, "xvclk");
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
+	ov2659->clk = devm_clk_get(&client->dev, "xvclk");
+	if (IS_ERR(ov2659->clk))
+		return PTR_ERR(ov2659->clk);
 
-	ov2659->xvclk_frequency = clk_get_rate(clk);
+	ov2659->xvclk_frequency = clk_get_rate(ov2659->clk);
 	if (ov2659->xvclk_frequency < 6000000 ||
 	    ov2659->xvclk_frequency > 27000000)
 		return -EINVAL;
@@ -1506,7 +1516,9 @@ static int ov2659_probe(struct i2c_client *client)
 	ov2659->frame_size = &ov2659_framesizes[2];
 	ov2659->format_ctrl_regs = ov2659_formats[0].format_ctrl_regs;
 
-	ov2659_power_on(&client->dev);
+	ret = ov2659_power_on(&client->dev);
+	if (ret < 0)
+		goto error;
 
 	ret = ov2659_detect(sd);
 	if (ret < 0)
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply index

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-21  3:48 [PATCH v4 0/4] arm: imx: Add i.mx6q DaSheng COM-9XX SBC board support dillon.minfei
2021-04-21  3:48 ` [PATCH v4 1/4] dt-bindings: add dasheng vendor prefix dillon.minfei
2021-04-21  3:48 ` [PATCH v4 2/4] dt-bindings: arm: imx: Add i.mx6q DaSheng COM-9XX SBC dillon.minfei
2021-04-21  3:48 ` [PATCH v4 3/4] arm: dts: imx: Add i.mx6q DaSheng COM-9XX SBC board support dillon.minfei
2021-04-29  9:46   ` dillon min
2021-04-21  3:48 ` dillon.minfei [this message]
2021-04-29  9:48   ` [PATCH v4 4/4] media: i2c: ov2659: Use clk_{prepare_enable, disable_unprepare}() to set xvclk on/off dillon min
2021-05-03 12:24   ` Lad, Prabhakar
2021-05-03 14:11     ` dillon min

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1618976938-20834-5-git-send-email-dillon.minfei@gmail.com \
    --to=dillon.minfei@gmail.com \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=krzk@kernel.org \
    --cc=krzysztof.kozlowski@canonical.com \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux@rempel-privat.de \
    --cc=matthias.schiffer@ew.tq-group.com \
    --cc=mchehab@kernel.org \
    --cc=olof@lixom.net \
    --cc=prabhakar.csengg@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=s.riedmueller@phytec.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git