linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Abel Vesa <abel.vesa@nxp.com>
To: Mike Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Jacky Bai <ping.bai@nxp.com>, Abel Vesa <abel.vesa@nxp.com>
Subject: [PATCH v2] clk: imx: Add imx8dxl clk driver
Date: Fri, 17 Dec 2021 15:25:33 +0200	[thread overview]
Message-ID: <1639747533-9778-1-git-send-email-abel.vesa@nxp.com> (raw)

From: Jacky Bai <ping.bai@nxp.com>

Add files for imx8dxl clk driver which is based on imx8qxp clock driver.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
---

Changes since v1:
 * Moved the dxl compatible and rsrc table to be sorted alphabetically.

 drivers/clk/imx/Makefile           |  3 +-
 drivers/clk/imx/clk-imx8dxl-rsrc.c | 66 ++++++++++++++++++++++++++++++
 drivers/clk/imx/clk-imx8qxp.c      |  1 +
 drivers/clk/imx/clk-scu.h          |  1 +
 4 files changed, 70 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/imx/clk-imx8dxl-rsrc.c

diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index b5e040026dfb..f8a44c4ca94a 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -28,7 +28,8 @@ obj-$(CONFIG_CLK_IMX8MQ) += clk-imx8mq.o
 
 obj-$(CONFIG_MXC_CLK_SCU) += clk-imx-scu.o clk-imx-lpcg-scu.o
 clk-imx-scu-$(CONFIG_CLK_IMX8QXP) += clk-scu.o clk-imx8qxp.o \
-				     clk-imx8qxp-rsrc.o clk-imx8qm-rsrc.o
+				     clk-imx8qxp-rsrc.o clk-imx8qm-rsrc.o \
+				     clk-imx8dxl-rsrc.o
 clk-imx-lpcg-scu-$(CONFIG_CLK_IMX8QXP) += clk-lpcg-scu.o clk-imx8qxp-lpcg.o
 
 obj-$(CONFIG_CLK_IMX8ULP) += clk-imx8ulp.o
diff --git a/drivers/clk/imx/clk-imx8dxl-rsrc.c b/drivers/clk/imx/clk-imx8dxl-rsrc.c
new file mode 100644
index 000000000000..69b7aa34fff5
--- /dev/null
+++ b/drivers/clk/imx/clk-imx8dxl-rsrc.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019~2020 NXP
+ */
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+#include "clk-scu.h"
+
+/* Keep sorted in the ascending order */
+static u32 imx8dxl_clk_scu_rsrc_table[] = {
+	IMX_SC_R_SPI_0,
+	IMX_SC_R_SPI_1,
+	IMX_SC_R_SPI_2,
+	IMX_SC_R_SPI_3,
+	IMX_SC_R_UART_0,
+	IMX_SC_R_UART_1,
+	IMX_SC_R_UART_2,
+	IMX_SC_R_UART_3,
+	IMX_SC_R_I2C_0,
+	IMX_SC_R_I2C_1,
+	IMX_SC_R_I2C_2,
+	IMX_SC_R_I2C_3,
+	IMX_SC_R_ADC_0,
+	IMX_SC_R_FTM_0,
+	IMX_SC_R_FTM_1,
+	IMX_SC_R_CAN_0,
+	IMX_SC_R_LCD_0,
+	IMX_SC_R_LCD_0_PWM_0,
+	IMX_SC_R_PWM_0,
+	IMX_SC_R_PWM_1,
+	IMX_SC_R_PWM_2,
+	IMX_SC_R_PWM_3,
+	IMX_SC_R_PWM_4,
+	IMX_SC_R_PWM_5,
+	IMX_SC_R_PWM_6,
+	IMX_SC_R_PWM_7,
+	IMX_SC_R_GPT_0,
+	IMX_SC_R_GPT_1,
+	IMX_SC_R_GPT_2,
+	IMX_SC_R_GPT_3,
+	IMX_SC_R_GPT_4,
+	IMX_SC_R_FSPI_0,
+	IMX_SC_R_FSPI_1,
+	IMX_SC_R_SDHC_0,
+	IMX_SC_R_SDHC_1,
+	IMX_SC_R_SDHC_2,
+	IMX_SC_R_ENET_0,
+	IMX_SC_R_ENET_1,
+	IMX_SC_R_MLB_0,
+	IMX_SC_R_USB_1,
+	IMX_SC_R_NAND,
+	IMX_SC_R_M4_0_I2C,
+	IMX_SC_R_M4_0_UART,
+	IMX_SC_R_ELCDIF_PLL,
+	IMX_SC_R_AUDIO_PLL_0,
+	IMX_SC_R_AUDIO_PLL_1,
+	IMX_SC_R_AUDIO_CLK_0,
+	IMX_SC_R_AUDIO_CLK_1,
+	IMX_SC_R_A35
+};
+
+const struct imx_clk_scu_rsrc_table imx_clk_scu_rsrc_imx8dxl = {
+	.rsrc = imx8dxl_clk_scu_rsrc_table,
+	.num = ARRAY_SIZE(imx8dxl_clk_scu_rsrc_table),
+};
diff --git a/drivers/clk/imx/clk-imx8qxp.c b/drivers/clk/imx/clk-imx8qxp.c
index 40a2efb1329b..546a3703bfeb 100644
--- a/drivers/clk/imx/clk-imx8qxp.c
+++ b/drivers/clk/imx/clk-imx8qxp.c
@@ -295,6 +295,7 @@ static int imx8qxp_clk_probe(struct platform_device *pdev)
 
 static const struct of_device_id imx8qxp_match[] = {
 	{ .compatible = "fsl,scu-clk", },
+	{ .compatible = "fsl,imx8dxl-clk", &imx_clk_scu_rsrc_imx8dxl, },
 	{ .compatible = "fsl,imx8qxp-clk", &imx_clk_scu_rsrc_imx8qxp, },
 	{ .compatible = "fsl,imx8qm-clk", &imx_clk_scu_rsrc_imx8qm, },
 	{ /* sentinel */ }
diff --git a/drivers/clk/imx/clk-scu.h b/drivers/clk/imx/clk-scu.h
index 22156e93b85d..af7b697f51ca 100644
--- a/drivers/clk/imx/clk-scu.h
+++ b/drivers/clk/imx/clk-scu.h
@@ -21,6 +21,7 @@ struct imx_clk_scu_rsrc_table {
 
 extern struct list_head imx_scu_clks[];
 extern const struct dev_pm_ops imx_clk_lpcg_scu_pm_ops;
+extern const struct imx_clk_scu_rsrc_table imx_clk_scu_rsrc_imx8dxl;
 extern const struct imx_clk_scu_rsrc_table imx_clk_scu_rsrc_imx8qxp;
 extern const struct imx_clk_scu_rsrc_table imx_clk_scu_rsrc_imx8qm;
 
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2021-12-17 13:26 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-17 13:25 Abel Vesa [this message]
2022-01-08  1:27 ` [PATCH v2] clk: imx: Add imx8dxl clk driver Stephen Boyd
2022-01-18 10:26 ` Abel Vesa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1639747533-9778-1-git-send-email-abel.vesa@nxp.com \
    --to=abel.vesa@nxp.com \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=ping.bai@nxp.com \
    --cc=s.hauer@pengutronix.de \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).