From: <gregkh@linuxfoundation.org>
To: bcm-kernel-feedback-list@broadcom.com, eric@anholt.net,
f.fainelli@gmail.com, gregkh@linuxfoundation.org,
jan.kiszka@web.de, linus.walleij@linaro.org,
linux-arm-kernel@lists.infradead.org,
linux-rpi-kernel@lists.infradead.org, mark.rutland@arm.com,
nsaenz@kernel.org, olof@lixom.net, phil@raspberrypi.com,
rjui@broadcom.com, robh+dt@kernel.org, sbranden@broadcom.com,
stefan.wahren@i2se.com, wahrenst@gmx.net
Cc: <stable-commits@vger.kernel.org>
Subject: Patch "ARM: dts: gpio-ranges property is now required" has been added to the 5.4-stable tree
Date: Thu, 27 Jan 2022 17:01:49 +0100 [thread overview]
Message-ID: <16432993096685@kroah.com> (raw)
In-Reply-To: <20220125194222.12783-8-f.fainelli@gmail.com>
This is a note to let you know that I've just added the patch titled
ARM: dts: gpio-ranges property is now required
to the 5.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm-dts-gpio-ranges-property-is-now-required.patch
and it can be found in the queue-5.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
From foo@baz Thu Jan 27 04:40:37 PM CET 2022
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Tue, 25 Jan 2022 11:42:22 -0800
Subject: ARM: dts: gpio-ranges property is now required
To: stable@vger.kernel.org
Cc: Phil Elwell <phil@raspberrypi.com>, Stefan Wahren <stefan.wahren@i2se.com>, Florian Fainelli <f.fainelli@gmail.com>, Jan Kiszka <jan.kiszka@web.de>, Linus Walleij <linus.walleij@linaro.org>, Olof Johansson <olof@lixom.net>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Ray Jui <rjui@broadcom.com>, Scott Branden <sbranden@broadcom.com>, bcm-kernel-feedback-list@broadcom.com (maintainer:BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITE...), Eric Anholt <eric@anholt.net>, Stefan Wahren <wahrenst@gmx.net>, Nicolas Saenz Julienne <nsaenz@kernel.org>, devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS), linux-kernel@vger.kernel.org (open list), linux-gpio@vger.kernel.org (open list:PIN CONTROL SUBSYSTEM), linux-rpi-kernel@lists.infradead.org (moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE), linux-arm-kernel@lists.infradead.org (moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE)
Message-ID: <20220125194222.12783-8-f.fainelli@gmail.com>
From: Phil Elwell <phil@raspberrypi.com>
commit c8013355ead68dce152cf426686f8a5f80d88b40 upstream
Since [1], added in 5.7, the absence of a gpio-ranges property has
prevented GPIOs from being restored to inputs when released.
Add those properties for BCM283x and BCM2711 devices.
[1] commit 2ab73c6d8323 ("gpio: Support GPIO controllers without
pin-ranges")
Link: https://lore.kernel.org/r/20220104170247.956760-1-linus.walleij@linaro.org
Fixes: 2ab73c6d8323 ("gpio: Support GPIO controllers without pin-ranges")
Fixes: 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio hogs")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211206092237.4105895-3-phil@raspberrypi.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
[florian: Remove bcm2711.dtsi hunk which does not exist in 5.4]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/boot/dts/bcm283x.dtsi | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -183,6 +183,7 @@
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&gpio 0 0 54>;
/* Defines pin muxing groups according to
* BCM2835-ARM-Peripherals.pdf page 102.
Patches currently in stable-queue which might be from f.fainelli@gmail.com are
queue-5.4/pinctrl-bcm2835-drop-unused-define.patch
queue-5.4/arm-dts-gpio-ranges-property-is-now-required.patch
queue-5.4/pinctrl-bcm2835-add-support-for-wake-up-interrupts.patch
queue-5.4/pinctrl-bcm2835-change-init-order-for-gpio-hogs.patch
queue-5.4/pinctrl-bcm2835-refactor-platform-data.patch
queue-5.4/pinctrl-bcm2835-match-bcm7211-compatible-string.patch
queue-5.4/pinctrl-bcm2835-add-support-for-all-gpios-on-bcm2711.patch
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-01-27 16:03 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-25 19:42 [PATCH stable 5.4 0/7] pinctrl-bcm2835 gpio-ranges bugfix Florian Fainelli
2022-01-25 19:42 ` [PATCH stable 5.4 1/7] pinctrl: bcm2835: Drop unused define Florian Fainelli
2022-01-27 16:01 ` Patch "pinctrl: bcm2835: Drop unused define" has been added to the 5.4-stable tree gregkh
2022-01-25 19:42 ` [PATCH stable 5.4 2/7] pinctrl: bcm2835: Refactor platform data Florian Fainelli
2022-01-27 16:01 ` Patch "pinctrl: bcm2835: Refactor platform data" has been added to the 5.4-stable tree gregkh
2022-01-25 19:42 ` [PATCH stable 5.4 3/7] pinctrl: bcm2835: Add support for all GPIOs on BCM2711 Florian Fainelli
2022-01-27 16:01 ` Patch "pinctrl: bcm2835: Add support for all GPIOs on BCM2711" has been added to the 5.4-stable tree gregkh
2022-01-25 19:42 ` [PATCH stable 5.4 4/7] pinctrl: bcm2835: Match BCM7211 compatible string Florian Fainelli
2022-01-27 16:01 ` Patch "pinctrl: bcm2835: Match BCM7211 compatible string" has been added to the 5.4-stable tree gregkh
2022-01-25 19:42 ` [PATCH stable 5.4 5/7] pinctrl: bcm2835: Add support for wake-up interrupts Florian Fainelli
2022-01-27 16:01 ` Patch "pinctrl: bcm2835: Add support for wake-up interrupts" has been added to the 5.4-stable tree gregkh
2022-01-25 19:42 ` [PATCH stable 5.4 6/7] pinctrl: bcm2835: Change init order for gpio hogs Florian Fainelli
2022-01-27 16:01 ` Patch "pinctrl: bcm2835: Change init order for gpio hogs" has been added to the 5.4-stable tree gregkh
2022-01-25 19:42 ` [PATCH stable 5.4 7/7] ARM: dts: gpio-ranges property is now required Florian Fainelli
2022-01-27 16:01 ` gregkh [this message]
2022-01-27 15:41 ` [PATCH stable 5.4 0/7] pinctrl-bcm2835 gpio-ranges bugfix Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=16432993096685@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=eric@anholt.net \
--cc=f.fainelli@gmail.com \
--cc=jan.kiszka@web.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=nsaenz@kernel.org \
--cc=olof@lixom.net \
--cc=phil@raspberrypi.com \
--cc=rjui@broadcom.com \
--cc=robh+dt@kernel.org \
--cc=sbranden@broadcom.com \
--cc=stable-commits@vger.kernel.org \
--cc=stefan.wahren@i2se.com \
--cc=wahrenst@gmx.net \
--subject='Re: Patch "ARM: dts: gpio-ranges property is now required" has been added to the 5.4-stable tree' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).