Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v1 1/1] arm64: dts: rockchip: Add support for TB-96AI board
@ 2019-07-11  2:12 Elon Zhang
  2019-07-17 15:47 ` Manivannan Sadhasivam
  0 siblings, 1 reply; 4+ messages in thread
From: Elon Zhang @ 2019-07-11  2:12 UTC (permalink / raw)
  To: heiko, mark.rutland, robh+dt
  Cc: devicetree, linux-kernel, Elon Zhang, linux-rockchip,
	manivannan.sadhasivam, linux-arm-kernel

Add devicetree support for RK3399Pro TB-96AI board, one of
the 96Boards family.

The TB-96AI board is a 96Boards Compute SOM design, launched
by Linaro, Rockchip and Beiqicloud.

More information can be obtained from the following websites:
1.https://www.96boards.org/product/tb-96ai/
2.http://t.rock-chips.com/
3.http://www.beiqicloud.com/

This patch add basic node for the board and support booting up
to Fedora.

Signed-off-by: Elon Zhang <zhangzj@rock-chips.com>

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 5f2687acbf94..3d6c8d4363b5 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -27,3 +27,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-tb-96ai.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
new file mode 100644
index 000000000000..1935df99065d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
@@ -0,0 +1,629 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399pro.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	compatible = "rockchip,rk3399pro-tb-96ai", "rockchip,rk3399pro";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	xin32k: xin32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+		#clock-cells = <0>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc5v0_sys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vdd_log: vdd_log {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 =<&leds_gpio>;
+
+		led@1 {
+			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+			label = "system_work_led1";
+			retain-state-suspended;
+		};
+
+		led@2 {
+			gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+			label = "system_work_led2";
+			retain-state-suspended;
+		};
+
+		led@3 {
+			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+			label = "system_work_led3";
+			retain-state-suspended;
+		};
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	i2c-scl-rising-time-ns = <180>;
+	i2c-scl-falling-time-ns = <30>;
+	clock-frequency = <400000>;
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default", "pmic-sleep",
+				"pmic-power-off", "pmic-reset";
+		pinctrl-0 = <&pmic_int_l>;
+		pinctrl-1 = <&soc_slppin_slp>, <&rk809_slppin_slp>;
+		pinctrl-2 = <&soc_slppin_gpio>, <&rk809_slppin_pwrdn>;
+		pinctrl-3 = <&soc_slppin_gpio>,<&rk809_slppin_null>;
+		rockchip,system-power-controller;
+		pmic-reset-func = <1>;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_buck5>;
+		vcc6-supply = <&vcc_buck5>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		pwrkey {
+			status = "okay";
+		};
+
+		rtc {
+			status = "okay";
+		};
+
+		pinctrl_rk8xx: pinctrl_rk8xx {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			rk809_slppin_null: rk809_slppin_null {
+				pins = "gpio_slp";
+				function = "pin_fun0";
+			};
+
+			rk809_slppin_slp: rk809_slppin_slp {
+				pins = "gpio_slp";
+				function = "pin_fun1";
+			};
+
+			rk809_slppin_pwrdn: rk809_slppin_pwrdn {
+				pins = "gpio_slp";
+				function = "pin_fun2";
+			};
+
+			rk809_slppin_rst: rk809_slppin_rst {
+				pins = "gpio_slp";
+				function = "pin_fun3";
+			};
+		};
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_center";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_cpu_l";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc3v3_sys";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_buck5: DCDC_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-name = "vcc_buck5";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2200000>;
+				};
+			};
+
+			vcca_0v9: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vcca_0v9";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-name = "vcc_1v8";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc0v9_soc: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-name = "vcc0v9_soc";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-name = "vcca_1v8";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd1v5_dvp: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+
+				regulator-name = "vdd1v5_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+
+				regulator-name = "vcc_1v5";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-name = "vcc_3v0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-name = "vcc_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc5v0_usb: SWITCH_REG1 {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+
+				regulator-name = "vcc5v0_usb";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_3v3: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-name = "vccio_3v3";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: tcs452x@1c {
+		compatible = "tcs,tcs452x";
+		reg = <0x1c>;
+		vin-supply = <&vcc5v0_sys>;
+		regulator-compatible = "fan53555-reg";
+		pinctrl-0 = <&vsel1_gpio>;
+		vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <2300>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-initial-state = <3>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: tcs452x@10 {
+		compatible = "tcs,tcs452x";
+		status = "okay";
+		reg = <0x10>;
+		vin-supply = <&vcc5v0_sys>;
+		regulator-compatible = "fan53555-reg";
+		pinctrl-0 = <&vsel2_gpio>;
+		vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <735000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-ramp-delay = <2300>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+};
+
+&i2c8 {
+	status = "okay";
+	i2c-scl-rising-time-ns = <345>;
+	i2c-scl-falling-time-ns = <11>;
+	clock-frequency = <100000>;
+
+	fusb0: fusb30x@22 {
+		compatible = "fairchild,fusb302";
+		reg = <0x22>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int>;
+		int-n-gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
+		vbus-5v-gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_LOW>;
+		status = "okay";
+	};
+
+};
+
+&io_domains {
+	status = "okay";
+	bt656-supply = <&vcca_1v8>; /* APIO2_VDD */
+	audio-supply = <&vcca_1v8>; /* APIO5_VDD */
+	sdmmc-supply = <&vccio_sd>; /* SDMMC0_VDD */
+	gpio1830-supply = <&vcc_1v8>; /* APIO4_VDD */
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&npu_ref_clk>;
+
+	fusb30x {
+		fusb0_int: fusb0-int {
+			rockchip,pins =
+				<1 RK_PA2 0 &pcfg_pull_up>;
+		};
+	};
+
+	gpio-leds {
+		leds_gpio: leds-gpio {
+			rockchip,pins =
+				<2 5 RK_FUNC_GPIO &pcfg_pull_up>,
+				<2 4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<2 3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	npu_clk {
+		npu_ref_clk: npu-ref-clk {
+			rockchip,pins =
+				<0 RK_PA2 1 &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<1 RK_PC2 0 &pcfg_pull_up>;
+		};
+
+		soc_slppin_gpio: soc-slppin-gpio {
+			rockchip,pins =
+				<1 RK_PA5 0 &pcfg_output_low>;
+		};
+
+		soc_slppin_slp: soc-slppin-slp {
+			rockchip,pins =
+				<1 RK_PA5 1 &pcfg_pull_down>;
+		};
+
+		vsel1_gpio: vsel1-gpio {
+			rockchip,pins =
+				<1 RK_PC1 0 &pcfg_pull_down>;
+		};
+
+		vsel2_gpio: vsel2-gpio {
+			rockchip,pins =
+				<1 RK_PB6 0 &pcfg_pull_down>;
+		};
+	};
+
+	usb3 {
+		usb3_host_en: usb3-host-en {
+			rockchip,pins =
+				<2 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_1v8>;
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc_1v8>;
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	supports-emmc;
+	non-removable;
+	keep-power-in-suspend;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&sdmmc {
+	clock-frequency = <150000000>;
+	clock-freq-min-max = <400000 150000000>;
+	supports-sd;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	num-slots = <1>;
+	vqmmc-supply = <&vccio_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&tcphy0 {
+	extcon = <&fusb0>;
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+	extcon = <&fusb0>;
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_usb>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_usb>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	extcon = <&fusb0>;
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb3_host_en>;
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	snps,dis-u3-autosuspend-quirk;
+	status = "okay";
+};
+
-- 
2.17.1




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH v1 1/1] arm64: dts: rockchip: Add support for TB-96AI board
  2019-07-11  2:12 [PATCH v1 1/1] arm64: dts: rockchip: Add support for TB-96AI board Elon Zhang
@ 2019-07-17 15:47 ` Manivannan Sadhasivam
  2019-07-17 15:49   ` Manivannan Sadhasivam
  2019-07-17 17:50   ` Heiko Stübner
  0 siblings, 2 replies; 4+ messages in thread
From: Manivannan Sadhasivam @ 2019-07-17 15:47 UTC (permalink / raw)
  To: Elon Zhang
  Cc: mark.rutland, devicetree, heiko, linux-kernel, linux-rockchip,
	robh+dt, linux-arm-kernel

Hi Elon,

Thanks for the patch. Overall, this patch needs a bit of cleanup. There
are many nodes added which are not available in mainline.

Please see comments inline.

On Thu, Jul 11, 2019 at 10:12:09AM +0800, Elon Zhang wrote:
> Add devicetree support for RK3399Pro TB-96AI board, one of
> the 96Boards family.
> 
> The TB-96AI board is a 96Boards Compute SOM design, launched
> by Linaro, Rockchip and Beiqicloud.
> 
> More information can be obtained from the following websites:
> 1.https://www.96boards.org/product/tb-96ai/
> 2.http://t.rock-chips.com/
> 3.http://www.beiqicloud.com/
> 
> This patch add basic node for the board and support booting up
> to Fedora.
> 
> Signed-off-by: Elon Zhang <zhangzj@rock-chips.com>
> 
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 5f2687acbf94..3d6c8d4363b5 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -27,3 +27,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-tb-96ai.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
> new file mode 100644
> index 000000000000..1935df99065d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
> @@ -0,0 +1,629 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
> + */
> +
> +/dts-v1/;
> +#include "rk3399pro.dtsi"
> +#include "rk3399-opp.dtsi"
> +
> +/ {
> +	compatible = "rockchip,rk3399pro-tb-96ai", "rockchip,rk3399pro";
> +

I think the manufacturer of this board is, Xiamen Beiqi Technology Co. Ltd.
So, the compatible should be:

compatible = "beiqui,rk3399pro-tb-96ai", "rockchip,rk3399pro";

And there should a separate patch to add the vendor prefix. You can refer
below patch:

https://lkml.org/lkml/2019/7/17/39

> +	chosen {
> +		stdout-path = "serial2:1500000n8";
> +	};
> +
> +	xin32k: xin32k {
> +		compatible = "fixed-clock";
> +		clock-frequency = <32768>;
> +		clock-output-names = "xin32k";
> +		#clock-cells = <0>;
> +	};
> +
> +	vcc_phy: vcc-phy-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc_phy";
> +		regulator-always-on;
> +		regulator-boot-on;
> +	};
> +
> +	vcc5v0_sys: vccsys {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc5v0_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +	};
> +
> +	vdd_log: vdd_log {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vdd_log";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <900000>;
> +		regulator-max-microvolt = <900000>;
> +	};
> +
> +	leds: gpio-leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 =<&leds_gpio>;

Leave a space after =

> +
> +		led@1 {
> +			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
> +			label = "system_work_led1";
> +			retain-state-suspended;
> +		};
> +

We are using a standard LED formats for all 96Boards. Please see,
rk3399-rock960.dts for reference. Since there is only user leds
(apart from power leds), just define those as per the format.

> +		led@2 {
> +			gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
> +			label = "system_work_led2";
> +			retain-state-suspended;
> +		};
> +
> +		led@3 {
> +			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
> +			label = "system_work_led3";
> +			retain-state-suspended;
> +		};
> +	};
> +};
> +
> +&cpu_l0 {
> +	cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l1 {
> +	cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l2 {
> +	cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l3 {
> +	cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_b0 {
> +	cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&cpu_b1 {
> +	cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&emmc_phy {
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	status = "okay";
> +	i2c-scl-rising-time-ns = <180>;
> +	i2c-scl-falling-time-ns = <30>;
> +	clock-frequency = <400000>;
> +
> +	rk809: pmic@20 {
> +		compatible = "rockchip,rk809";

It looks like this driver is not present in mainline yet. I can see
some old patches in lkml archive but not sure about the status of those.
So, please remove this node and use dummy regulators where applicable.

> +		reg = <0x20>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
> +		pinctrl-names = "default", "pmic-sleep",
> +				"pmic-power-off", "pmic-reset";
> +		pinctrl-0 = <&pmic_int_l>;
> +		pinctrl-1 = <&soc_slppin_slp>, <&rk809_slppin_slp>;
> +		pinctrl-2 = <&soc_slppin_gpio>, <&rk809_slppin_pwrdn>;
> +		pinctrl-3 = <&soc_slppin_gpio>,<&rk809_slppin_null>;
> +		rockchip,system-power-controller;
> +		pmic-reset-func = <1>;
> +		wakeup-source;
> +		#clock-cells = <1>;
> +		clock-output-names = "rk808-clkout1", "rk808-clkout2";
> +
> +		vcc1-supply = <&vcc5v0_sys>;
> +		vcc2-supply = <&vcc5v0_sys>;
> +		vcc3-supply = <&vcc5v0_sys>;
> +		vcc4-supply = <&vcc5v0_sys>;
> +		vcc5-supply = <&vcc_buck5>;
> +		vcc6-supply = <&vcc_buck5>;
> +		vcc7-supply = <&vcc3v3_sys>;
> +		vcc8-supply = <&vcc3v3_sys>;
> +		vcc9-supply = <&vcc5v0_sys>;
> +
> +		pwrkey {
> +			status = "okay";
> +		};
> +
> +		rtc {
> +			status = "okay";
> +		};
> +
> +		pinctrl_rk8xx: pinctrl_rk8xx {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +
> +			rk809_slppin_null: rk809_slppin_null {
> +				pins = "gpio_slp";
> +				function = "pin_fun0";
> +			};
> +
> +			rk809_slppin_slp: rk809_slppin_slp {
> +				pins = "gpio_slp";
> +				function = "pin_fun1";
> +			};
> +
> +			rk809_slppin_pwrdn: rk809_slppin_pwrdn {
> +				pins = "gpio_slp";
> +				function = "pin_fun2";
> +			};
> +
> +			rk809_slppin_rst: rk809_slppin_rst {
> +				pins = "gpio_slp";
> +				function = "pin_fun3";
> +			};
> +		};
> +
> +		regulators {
> +			vdd_center: DCDC_REG1 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <750000>;
> +				regulator-max-microvolt = <1350000>;
> +				regulator-initial-mode = <0x2>;
> +				regulator-name = "vdd_center";
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <900000>;
> +				};
> +			};
> +
> +			vdd_cpu_l: DCDC_REG2 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <750000>;
> +				regulator-max-microvolt = <1350000>;
> +				regulator-ramp-delay = <6001>;
> +				regulator-initial-mode = <0x2>;
> +				regulator-name = "vdd_cpu_l";
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc_ddr: DCDC_REG3 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-name = "vcc_ddr";
> +				regulator-initial-mode = <0x2>;
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +				};
> +			};
> +
> +			vcc3v3_sys: DCDC_REG4 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-initial-mode = <0x2>;
> +				regulator-name = "vcc3v3_sys";
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <3300000>;
> +				};
> +			};
> +
> +			vcc_buck5: DCDC_REG5 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <2200000>;
> +				regulator-max-microvolt = <2200000>;
> +				regulator-name = "vcc_buck5";
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <2200000>;
> +				};
> +			};
> +
> +			vcca_0v9: LDO_REG1 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <900000>;
> +				regulator-max-microvolt = <900000>;
> +				regulator-name = "vcca_0v9";
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc_1v8: LDO_REG2 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +
> +				regulator-name = "vcc_1v8";
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1800000>;
> +				};
> +			};
> +
> +			vcc0v9_soc: LDO_REG3 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <900000>;
> +				regulator-max-microvolt = <900000>;
> +
> +				regulator-name = "vcc0v9_soc";
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <900000>;
> +				};
> +			};
> +
> +			vcca_1v8: LDO_REG4 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +
> +				regulator-name = "vcca_1v8";
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vdd1v5_dvp: LDO_REG5 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1500000>;
> +				regulator-max-microvolt = <1500000>;
> +
> +				regulator-name = "vdd1v5_dvp";
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc_1v5: LDO_REG6 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1500000>;
> +				regulator-max-microvolt = <1500000>;
> +
> +				regulator-name = "vcc_1v5";
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc_3v0: LDO_REG7 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <3000000>;
> +				regulator-max-microvolt = <3000000>;
> +
> +				regulator-name = "vcc_3v0";
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vccio_sd: LDO_REG8 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +
> +				regulator-name = "vccio_sd";
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <3300000>;
> +				};
> +			};
> +
> +			vcc_sd: LDO_REG9 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +
> +				regulator-name = "vcc_sd";
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <3300000>;
> +				};
> +			};
> +
> +			vcc5v0_usb: SWITCH_REG1 {
> +				regulator-min-microvolt = <5000000>;
> +				regulator-max-microvolt = <5000000>;
> +
> +				regulator-name = "vcc5v0_usb";
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vccio_3v3: SWITCH_REG2 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +
> +				regulator-name = "vccio_3v3";
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +		};
> +	};
> +
> +	vdd_cpu_b: tcs452x@1c {
> +		compatible = "tcs,tcs452x";

Again, there is no driver for this.

> +		reg = <0x1c>;
> +		vin-supply = <&vcc5v0_sys>;
> +		regulator-compatible = "fan53555-reg";
> +		pinctrl-0 = <&vsel1_gpio>;
> +		vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
> +		regulator-name = "vdd_cpu_b";
> +		regulator-min-microvolt = <712500>;
> +		regulator-max-microvolt = <1500000>;
> +		regulator-ramp-delay = <2300>;
> +		fcs,suspend-voltage-selector = <1>;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-initial-state = <3>;
> +		regulator-state-mem {
> +			regulator-off-in-suspend;
> +		};
> +	};
> +
> +	vdd_gpu: tcs452x@10 {
> +		compatible = "tcs,tcs452x";

ditto.

> +		status = "okay";
> +		reg = <0x10>;
> +		vin-supply = <&vcc5v0_sys>;
> +		regulator-compatible = "fan53555-reg";
> +		pinctrl-0 = <&vsel2_gpio>;
> +		vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
> +		regulator-name = "vdd_gpu";
> +		regulator-min-microvolt = <735000>;
> +		regulator-max-microvolt = <1400000>;
> +		regulator-ramp-delay = <2300>;
> +		fcs,suspend-voltage-selector = <1>;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-state-mem {
> +			regulator-off-in-suspend;
> +		};
> +	};
> +
> +};
> +
> +&i2c8 {
> +	status = "okay";
> +	i2c-scl-rising-time-ns = <345>;
> +	i2c-scl-falling-time-ns = <11>;
> +	clock-frequency = <100000>;
> +
> +	fusb0: fusb30x@22 {
> +		compatible = "fairchild,fusb302";

ditto, please remove.

> +		reg = <0x22>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&fusb0_int>;
> +		int-n-gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
> +		vbus-5v-gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_LOW>;
> +		status = "okay";
> +	};
> +
> +};
> +
> +&io_domains {
> +	status = "okay";
> +	bt656-supply = <&vcca_1v8>; /* APIO2_VDD */
> +	audio-supply = <&vcca_1v8>; /* APIO5_VDD */
> +	sdmmc-supply = <&vccio_sd>; /* SDMMC0_VDD */
> +	gpio1830-supply = <&vcc_1v8>; /* APIO4_VDD */
> +};
> +
> +&pinctrl {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&npu_ref_clk>;
> +
> +	fusb30x {
> +		fusb0_int: fusb0-int {
> +			rockchip,pins =
> +				<1 RK_PA2 0 &pcfg_pull_up>;
> +		};
> +	};

not needed.

> +
> +	gpio-leds {
> +		leds_gpio: leds-gpio {
> +			rockchip,pins =
> +				<2 5 RK_FUNC_GPIO &pcfg_pull_up>,
> +				<2 4 RK_FUNC_GPIO &pcfg_pull_up>,
> +				<2 3 RK_FUNC_GPIO &pcfg_pull_up>;

I don't think we need pull-up here.

> +		};
> +	};
> +
> +	npu_clk {
> +		npu_ref_clk: npu-ref-clk {
> +			rockchip,pins =
> +				<0 RK_PA2 1 &pcfg_pull_none>;
> +		};
> +	};
> +
> +	pmic {
> +		pmic_int_l: pmic-int-l {
> +			rockchip,pins =
> +				<1 RK_PC2 0 &pcfg_pull_up>;
> +		};
> +
> +		soc_slppin_gpio: soc-slppin-gpio {
> +			rockchip,pins =
> +				<1 RK_PA5 0 &pcfg_output_low>;
> +		};
> +
> +		soc_slppin_slp: soc-slppin-slp {
> +			rockchip,pins =
> +				<1 RK_PA5 1 &pcfg_pull_down>;
> +		};
> +
> +		vsel1_gpio: vsel1-gpio {
> +			rockchip,pins =
> +				<1 RK_PC1 0 &pcfg_pull_down>;
> +		};
> +
> +		vsel2_gpio: vsel2-gpio {
> +			rockchip,pins =
> +				<1 RK_PB6 0 &pcfg_pull_down>;
> +		};
> +	};

not needed.

> +
> +	usb3 {
> +		usb3_host_en: usb3-host-en {
> +			rockchip,pins =
> +				<2 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>;
> +		};
> +	};
> +};
> +
> +&pmu_io_domains {
> +	status = "okay";
> +	pmu1830-supply = <&vcc_1v8>;
> +};
> +
> +&pwm0 {
> +	status = "okay";
> +};
> +
> +&pwm2 {
> +	status = "okay";
> +};
> +
> +&saradc {
> +	status = "okay";
> +	vref-supply = <&vcc_1v8>;
> +};
> +
> +&sdhci {
> +	bus-width = <8>;
> +	mmc-hs400-1_8v;
> +	supports-emmc;

there is no such property, so please remove. Since this controller is
used for emmc, you can use "no-sd" and "no-sdio" properties if needed.

> +	non-removable;
> +	keep-power-in-suspend;
> +	mmc-hs400-enhanced-strobe;
> +	status = "okay";
> +};
> +
> +&sdmmc {
> +	clock-frequency = <150000000>;
> +	clock-freq-min-max = <400000 150000000>;
> +	supports-sd;

Same as above, property not available. Use, "no-sdio" and "no-emmc" if
needed.

> +	bus-width = <4>;
> +	cap-mmc-highspeed;
> +	cap-sd-highspeed;
> +	disable-wp;
> +	num-slots = <1>;

not needed.

> +	vqmmc-supply = <&vccio_sd>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
> +	status = "okay";
> +};
> +
> +&tcphy0 {
> +	extcon = <&fusb0>;
> +	status = "okay";
> +};
> +
> +&tcphy1 {
> +	status = "okay";
> +};
> +
> +&tsadc {
> +	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
> +	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */

Any clue about shutdown temperature? Not necessary now but good to have.

Thanks,
Mani
> +	status = "okay";
> +};
> +
> +&u2phy0 {
> +	status = "okay";
> +	extcon = <&fusb0>;
> +
> +	u2phy0_otg: otg-port {
> +		status = "okay";
> +	};
> +
> +	u2phy0_host: host-port {
> +		phy-supply = <&vcc5v0_usb>;
> +		status = "okay";
> +	};
> +};
> +
> +&u2phy1 {
> +	status = "okay";
> +
> +	u2phy1_otg: otg-port {
> +		status = "okay";
> +	};
> +
> +	u2phy1_host: host-port {
> +		phy-supply = <&vcc5v0_usb>;
> +		status = "okay";
> +	};
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart0_xfer &uart0_cts>;
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	status = "okay";
> +};
> +
> +&uart4 {
> +	status = "okay";
> +};
> +
> +&usb_host0_ehci {
> +	status = "okay";
> +};
> +
> +&usb_host1_ehci {
> +	status = "okay";
> +};
> +
> +&usb_host0_ohci {
> +	status = "okay";
> +};
> +
> +&usb_host1_ohci {
> +	status = "okay";
> +};
> +
> +&usbdrd3_0 {
> +	extcon = <&fusb0>;
> +	status = "okay";
> +};
> +
> +&usbdrd3_1 {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&usb3_host_en>;
> +};
> +
> +&usbdrd_dwc3_0 {
> +	status = "okay";
> +};
> +
> +&usbdrd_dwc3_1 {
> +	snps,dis-u3-autosuspend-quirk;
> +	status = "okay";
> +};
> +
> -- 
> 2.17.1
> 
> 
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH v1 1/1] arm64: dts: rockchip: Add support for TB-96AI board
  2019-07-17 15:47 ` Manivannan Sadhasivam
@ 2019-07-17 15:49   ` Manivannan Sadhasivam
  2019-07-17 17:50   ` Heiko Stübner
  1 sibling, 0 replies; 4+ messages in thread
From: Manivannan Sadhasivam @ 2019-07-17 15:49 UTC (permalink / raw)
  To: Elon Zhang
  Cc: mark.rutland, devicetree, heiko, linux-kernel, linux-rockchip,
	robh+dt, linux-arm-kernel

On Wed, Jul 17, 2019 at 09:17:52PM +0530, Manivannan Sadhasivam wrote:
> Hi Elon,
> 
> Thanks for the patch. Overall, this patch needs a bit of cleanup. There
> are many nodes added which are not available in mainline.
> 
> Please see comments inline.
> 
> On Thu, Jul 11, 2019 at 10:12:09AM +0800, Elon Zhang wrote:
> > Add devicetree support for RK3399Pro TB-96AI board, one of
> > the 96Boards family.
> > 
> > The TB-96AI board is a 96Boards Compute SOM design, launched
> > by Linaro, Rockchip and Beiqicloud.
> > 
> > More information can be obtained from the following websites:
> > 1.https://www.96boards.org/product/tb-96ai/
> > 2.http://t.rock-chips.com/
> > 3.http://www.beiqicloud.com/
> > 
> > This patch add basic node for the board and support booting up
> > to Fedora.
> > 
> > Signed-off-by: Elon Zhang <zhangzj@rock-chips.com>
> > 
> > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> > index 5f2687acbf94..3d6c8d4363b5 100644
> > --- a/arch/arm64/boot/dts/rockchip/Makefile
> > +++ b/arch/arm64/boot/dts/rockchip/Makefile
> > @@ -27,3 +27,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
> > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-tb-96ai.dtb
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
> > new file mode 100644
> > index 000000000000..1935df99065d
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
> > @@ -0,0 +1,629 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
> > + */
> > +
> > +/dts-v1/;
> > +#include "rk3399pro.dtsi"
> > +#include "rk3399-opp.dtsi"
> > +
> > +/ {
> > +	compatible = "rockchip,rk3399pro-tb-96ai", "rockchip,rk3399pro";
> > +
> 
> I think the manufacturer of this board is, Xiamen Beiqi Technology Co. Ltd.
> So, the compatible should be:
> 
> compatible = "beiqui,rk3399pro-tb-96ai", "rockchip,rk3399pro";

s/beiqui/beiqi

> 
> And there should a separate patch to add the vendor prefix. You can refer
> below patch:
> 
> https://lkml.org/lkml/2019/7/17/39
> 
> > +	chosen {
> > +		stdout-path = "serial2:1500000n8";
> > +	};
> > +
> > +	xin32k: xin32k {
> > +		compatible = "fixed-clock";
> > +		clock-frequency = <32768>;
> > +		clock-output-names = "xin32k";
> > +		#clock-cells = <0>;
> > +	};
> > +
> > +	vcc_phy: vcc-phy-regulator {
> > +		compatible = "regulator-fixed";
> > +		regulator-name = "vcc_phy";
> > +		regulator-always-on;
> > +		regulator-boot-on;
> > +	};
> > +
> > +	vcc5v0_sys: vccsys {
> > +		compatible = "regulator-fixed";
> > +		regulator-name = "vcc5v0_sys";
> > +		regulator-always-on;
> > +		regulator-boot-on;
> > +		regulator-min-microvolt = <5000000>;
> > +		regulator-max-microvolt = <5000000>;
> > +	};
> > +
> > +	vdd_log: vdd_log {
> > +		compatible = "regulator-fixed";
> > +		regulator-name = "vdd_log";
> > +		regulator-always-on;
> > +		regulator-boot-on;
> > +		regulator-min-microvolt = <900000>;
> > +		regulator-max-microvolt = <900000>;
> > +	};
> > +
> > +	leds: gpio-leds {
> > +		compatible = "gpio-leds";
> > +		pinctrl-names = "default";
> > +		pinctrl-0 =<&leds_gpio>;
> 
> Leave a space after =
> 
> > +
> > +		led@1 {
> > +			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
> > +			label = "system_work_led1";
> > +			retain-state-suspended;
> > +		};
> > +
> 
> We are using a standard LED formats for all 96Boards. Please see,
> rk3399-rock960.dts for reference. Since there is only user leds
> (apart from power leds), just define those as per the format.
> 
> > +		led@2 {
> > +			gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
> > +			label = "system_work_led2";
> > +			retain-state-suspended;
> > +		};
> > +
> > +		led@3 {
> > +			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
> > +			label = "system_work_led3";
> > +			retain-state-suspended;
> > +		};
> > +	};
> > +};
> > +
> > +&cpu_l0 {
> > +	cpu-supply = <&vdd_cpu_l>;
> > +};
> > +
> > +&cpu_l1 {
> > +	cpu-supply = <&vdd_cpu_l>;
> > +};
> > +
> > +&cpu_l2 {
> > +	cpu-supply = <&vdd_cpu_l>;
> > +};
> > +
> > +&cpu_l3 {
> > +	cpu-supply = <&vdd_cpu_l>;
> > +};
> > +
> > +&cpu_b0 {
> > +	cpu-supply = <&vdd_cpu_b>;
> > +};
> > +
> > +&cpu_b1 {
> > +	cpu-supply = <&vdd_cpu_b>;
> > +};
> > +
> > +&emmc_phy {
> > +	status = "okay";
> > +};
> > +
> > +&i2c0 {
> > +	status = "okay";
> > +	i2c-scl-rising-time-ns = <180>;
> > +	i2c-scl-falling-time-ns = <30>;
> > +	clock-frequency = <400000>;
> > +
> > +	rk809: pmic@20 {
> > +		compatible = "rockchip,rk809";
> 
> It looks like this driver is not present in mainline yet. I can see
> some old patches in lkml archive but not sure about the status of those.
> So, please remove this node and use dummy regulators where applicable.
> 
> > +		reg = <0x20>;
> > +		interrupt-parent = <&gpio1>;
> > +		interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
> > +		pinctrl-names = "default", "pmic-sleep",
> > +				"pmic-power-off", "pmic-reset";
> > +		pinctrl-0 = <&pmic_int_l>;
> > +		pinctrl-1 = <&soc_slppin_slp>, <&rk809_slppin_slp>;
> > +		pinctrl-2 = <&soc_slppin_gpio>, <&rk809_slppin_pwrdn>;
> > +		pinctrl-3 = <&soc_slppin_gpio>,<&rk809_slppin_null>;
> > +		rockchip,system-power-controller;
> > +		pmic-reset-func = <1>;
> > +		wakeup-source;
> > +		#clock-cells = <1>;
> > +		clock-output-names = "rk808-clkout1", "rk808-clkout2";
> > +
> > +		vcc1-supply = <&vcc5v0_sys>;
> > +		vcc2-supply = <&vcc5v0_sys>;
> > +		vcc3-supply = <&vcc5v0_sys>;
> > +		vcc4-supply = <&vcc5v0_sys>;
> > +		vcc5-supply = <&vcc_buck5>;
> > +		vcc6-supply = <&vcc_buck5>;
> > +		vcc7-supply = <&vcc3v3_sys>;
> > +		vcc8-supply = <&vcc3v3_sys>;
> > +		vcc9-supply = <&vcc5v0_sys>;
> > +
> > +		pwrkey {
> > +			status = "okay";
> > +		};
> > +
> > +		rtc {
> > +			status = "okay";
> > +		};
> > +
> > +		pinctrl_rk8xx: pinctrl_rk8xx {
> > +			gpio-controller;
> > +			#gpio-cells = <2>;
> > +
> > +			rk809_slppin_null: rk809_slppin_null {
> > +				pins = "gpio_slp";
> > +				function = "pin_fun0";
> > +			};
> > +
> > +			rk809_slppin_slp: rk809_slppin_slp {
> > +				pins = "gpio_slp";
> > +				function = "pin_fun1";
> > +			};
> > +
> > +			rk809_slppin_pwrdn: rk809_slppin_pwrdn {
> > +				pins = "gpio_slp";
> > +				function = "pin_fun2";
> > +			};
> > +
> > +			rk809_slppin_rst: rk809_slppin_rst {
> > +				pins = "gpio_slp";
> > +				function = "pin_fun3";
> > +			};
> > +		};
> > +
> > +		regulators {
> > +			vdd_center: DCDC_REG1 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <750000>;
> > +				regulator-max-microvolt = <1350000>;
> > +				regulator-initial-mode = <0x2>;
> > +				regulator-name = "vdd_center";
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +					regulator-suspend-microvolt = <900000>;
> > +				};
> > +			};
> > +
> > +			vdd_cpu_l: DCDC_REG2 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <750000>;
> > +				regulator-max-microvolt = <1350000>;
> > +				regulator-ramp-delay = <6001>;
> > +				regulator-initial-mode = <0x2>;
> > +				regulator-name = "vdd_cpu_l";
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +
> > +			vcc_ddr: DCDC_REG3 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-name = "vcc_ddr";
> > +				regulator-initial-mode = <0x2>;
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +				};
> > +			};
> > +
> > +			vcc3v3_sys: DCDC_REG4 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <3300000>;
> > +				regulator-max-microvolt = <3300000>;
> > +				regulator-initial-mode = <0x2>;
> > +				regulator-name = "vcc3v3_sys";
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +					regulator-suspend-microvolt = <3300000>;
> > +				};
> > +			};
> > +
> > +			vcc_buck5: DCDC_REG5 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <2200000>;
> > +				regulator-max-microvolt = <2200000>;
> > +				regulator-name = "vcc_buck5";
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +					regulator-suspend-microvolt = <2200000>;
> > +				};
> > +			};
> > +
> > +			vcca_0v9: LDO_REG1 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <900000>;
> > +				regulator-max-microvolt = <900000>;
> > +				regulator-name = "vcca_0v9";
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +
> > +			vcc_1v8: LDO_REG2 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <1800000>;
> > +				regulator-max-microvolt = <1800000>;
> > +
> > +				regulator-name = "vcc_1v8";
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +					regulator-suspend-microvolt = <1800000>;
> > +				};
> > +			};
> > +
> > +			vcc0v9_soc: LDO_REG3 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <900000>;
> > +				regulator-max-microvolt = <900000>;
> > +
> > +				regulator-name = "vcc0v9_soc";
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +					regulator-suspend-microvolt = <900000>;
> > +				};
> > +			};
> > +
> > +			vcca_1v8: LDO_REG4 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <1800000>;
> > +				regulator-max-microvolt = <1800000>;
> > +
> > +				regulator-name = "vcca_1v8";
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +
> > +			vdd1v5_dvp: LDO_REG5 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <1500000>;
> > +				regulator-max-microvolt = <1500000>;
> > +
> > +				regulator-name = "vdd1v5_dvp";
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +
> > +			vcc_1v5: LDO_REG6 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <1500000>;
> > +				regulator-max-microvolt = <1500000>;
> > +
> > +				regulator-name = "vcc_1v5";
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +
> > +			vcc_3v0: LDO_REG7 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <3000000>;
> > +				regulator-max-microvolt = <3000000>;
> > +
> > +				regulator-name = "vcc_3v0";
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +
> > +			vccio_sd: LDO_REG8 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <1800000>;
> > +				regulator-max-microvolt = <3300000>;
> > +
> > +				regulator-name = "vccio_sd";
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +					regulator-suspend-microvolt = <3300000>;
> > +				};
> > +			};
> > +
> > +			vcc_sd: LDO_REG9 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <3300000>;
> > +				regulator-max-microvolt = <3300000>;
> > +
> > +				regulator-name = "vcc_sd";
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +					regulator-suspend-microvolt = <3300000>;
> > +				};
> > +			};
> > +
> > +			vcc5v0_usb: SWITCH_REG1 {
> > +				regulator-min-microvolt = <5000000>;
> > +				regulator-max-microvolt = <5000000>;
> > +
> > +				regulator-name = "vcc5v0_usb";
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +
> > +			vccio_3v3: SWITCH_REG2 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <3300000>;
> > +				regulator-max-microvolt = <3300000>;
> > +
> > +				regulator-name = "vccio_3v3";
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +		};
> > +	};
> > +
> > +	vdd_cpu_b: tcs452x@1c {
> > +		compatible = "tcs,tcs452x";
> 
> Again, there is no driver for this.
> 
> > +		reg = <0x1c>;
> > +		vin-supply = <&vcc5v0_sys>;
> > +		regulator-compatible = "fan53555-reg";
> > +		pinctrl-0 = <&vsel1_gpio>;
> > +		vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
> > +		regulator-name = "vdd_cpu_b";
> > +		regulator-min-microvolt = <712500>;
> > +		regulator-max-microvolt = <1500000>;
> > +		regulator-ramp-delay = <2300>;
> > +		fcs,suspend-voltage-selector = <1>;
> > +		regulator-always-on;
> > +		regulator-boot-on;
> > +		regulator-initial-state = <3>;
> > +		regulator-state-mem {
> > +			regulator-off-in-suspend;
> > +		};
> > +	};
> > +
> > +	vdd_gpu: tcs452x@10 {
> > +		compatible = "tcs,tcs452x";
> 
> ditto.
> 
> > +		status = "okay";
> > +		reg = <0x10>;
> > +		vin-supply = <&vcc5v0_sys>;
> > +		regulator-compatible = "fan53555-reg";
> > +		pinctrl-0 = <&vsel2_gpio>;
> > +		vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
> > +		regulator-name = "vdd_gpu";
> > +		regulator-min-microvolt = <735000>;
> > +		regulator-max-microvolt = <1400000>;
> > +		regulator-ramp-delay = <2300>;
> > +		fcs,suspend-voltage-selector = <1>;
> > +		regulator-always-on;
> > +		regulator-boot-on;
> > +		regulator-state-mem {
> > +			regulator-off-in-suspend;
> > +		};
> > +	};
> > +
> > +};
> > +
> > +&i2c8 {
> > +	status = "okay";
> > +	i2c-scl-rising-time-ns = <345>;
> > +	i2c-scl-falling-time-ns = <11>;
> > +	clock-frequency = <100000>;
> > +
> > +	fusb0: fusb30x@22 {
> > +		compatible = "fairchild,fusb302";
> 
> ditto, please remove.
> 
> > +		reg = <0x22>;
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&fusb0_int>;
> > +		int-n-gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
> > +		vbus-5v-gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_LOW>;
> > +		status = "okay";
> > +	};
> > +
> > +};
> > +
> > +&io_domains {
> > +	status = "okay";
> > +	bt656-supply = <&vcca_1v8>; /* APIO2_VDD */
> > +	audio-supply = <&vcca_1v8>; /* APIO5_VDD */
> > +	sdmmc-supply = <&vccio_sd>; /* SDMMC0_VDD */
> > +	gpio1830-supply = <&vcc_1v8>; /* APIO4_VDD */
> > +};
> > +
> > +&pinctrl {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&npu_ref_clk>;
> > +
> > +	fusb30x {
> > +		fusb0_int: fusb0-int {
> > +			rockchip,pins =
> > +				<1 RK_PA2 0 &pcfg_pull_up>;
> > +		};
> > +	};
> 
> not needed.
> 
> > +
> > +	gpio-leds {
> > +		leds_gpio: leds-gpio {
> > +			rockchip,pins =
> > +				<2 5 RK_FUNC_GPIO &pcfg_pull_up>,
> > +				<2 4 RK_FUNC_GPIO &pcfg_pull_up>,
> > +				<2 3 RK_FUNC_GPIO &pcfg_pull_up>;
> 
> I don't think we need pull-up here.
> 
> > +		};
> > +	};
> > +
> > +	npu_clk {
> > +		npu_ref_clk: npu-ref-clk {
> > +			rockchip,pins =
> > +				<0 RK_PA2 1 &pcfg_pull_none>;
> > +		};
> > +	};
> > +
> > +	pmic {
> > +		pmic_int_l: pmic-int-l {
> > +			rockchip,pins =
> > +				<1 RK_PC2 0 &pcfg_pull_up>;
> > +		};
> > +
> > +		soc_slppin_gpio: soc-slppin-gpio {
> > +			rockchip,pins =
> > +				<1 RK_PA5 0 &pcfg_output_low>;
> > +		};
> > +
> > +		soc_slppin_slp: soc-slppin-slp {
> > +			rockchip,pins =
> > +				<1 RK_PA5 1 &pcfg_pull_down>;
> > +		};
> > +
> > +		vsel1_gpio: vsel1-gpio {
> > +			rockchip,pins =
> > +				<1 RK_PC1 0 &pcfg_pull_down>;
> > +		};
> > +
> > +		vsel2_gpio: vsel2-gpio {
> > +			rockchip,pins =
> > +				<1 RK_PB6 0 &pcfg_pull_down>;
> > +		};
> > +	};
> 
> not needed.
> 
> > +
> > +	usb3 {
> > +		usb3_host_en: usb3-host-en {
> > +			rockchip,pins =
> > +				<2 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>;
> > +		};
> > +	};
> > +};
> > +
> > +&pmu_io_domains {
> > +	status = "okay";
> > +	pmu1830-supply = <&vcc_1v8>;
> > +};
> > +
> > +&pwm0 {
> > +	status = "okay";
> > +};
> > +
> > +&pwm2 {
> > +	status = "okay";
> > +};
> > +
> > +&saradc {
> > +	status = "okay";
> > +	vref-supply = <&vcc_1v8>;
> > +};
> > +
> > +&sdhci {
> > +	bus-width = <8>;
> > +	mmc-hs400-1_8v;
> > +	supports-emmc;
> 
> there is no such property, so please remove. Since this controller is
> used for emmc, you can use "no-sd" and "no-sdio" properties if needed.
> 
> > +	non-removable;
> > +	keep-power-in-suspend;
> > +	mmc-hs400-enhanced-strobe;
> > +	status = "okay";
> > +};
> > +
> > +&sdmmc {
> > +	clock-frequency = <150000000>;
> > +	clock-freq-min-max = <400000 150000000>;
> > +	supports-sd;
> 
> Same as above, property not available. Use, "no-sdio" and "no-emmc" if
> needed.
> 
> > +	bus-width = <4>;
> > +	cap-mmc-highspeed;
> > +	cap-sd-highspeed;
> > +	disable-wp;
> > +	num-slots = <1>;
> 
> not needed.
> 
> > +	vqmmc-supply = <&vccio_sd>;
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
> > +	status = "okay";
> > +};
> > +
> > +&tcphy0 {
> > +	extcon = <&fusb0>;
> > +	status = "okay";
> > +};
> > +
> > +&tcphy1 {
> > +	status = "okay";
> > +};
> > +
> > +&tsadc {
> > +	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
> > +	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
> 
> Any clue about shutdown temperature? Not necessary now but good to have.
> 
> Thanks,
> Mani
> > +	status = "okay";
> > +};
> > +
> > +&u2phy0 {
> > +	status = "okay";
> > +	extcon = <&fusb0>;
> > +
> > +	u2phy0_otg: otg-port {
> > +		status = "okay";
> > +	};
> > +
> > +	u2phy0_host: host-port {
> > +		phy-supply = <&vcc5v0_usb>;
> > +		status = "okay";
> > +	};
> > +};
> > +
> > +&u2phy1 {
> > +	status = "okay";
> > +
> > +	u2phy1_otg: otg-port {
> > +		status = "okay";
> > +	};
> > +
> > +	u2phy1_host: host-port {
> > +		phy-supply = <&vcc5v0_usb>;
> > +		status = "okay";
> > +	};
> > +};
> > +
> > +&uart0 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&uart0_xfer &uart0_cts>;
> > +	status = "okay";
> > +};
> > +
> > +&uart2 {
> > +	status = "okay";
> > +};
> > +
> > +&uart4 {
> > +	status = "okay";
> > +};
> > +
> > +&usb_host0_ehci {
> > +	status = "okay";
> > +};
> > +
> > +&usb_host1_ehci {
> > +	status = "okay";
> > +};
> > +
> > +&usb_host0_ohci {
> > +	status = "okay";
> > +};
> > +
> > +&usb_host1_ohci {
> > +	status = "okay";
> > +};
> > +
> > +&usbdrd3_0 {
> > +	extcon = <&fusb0>;
> > +	status = "okay";
> > +};
> > +
> > +&usbdrd3_1 {
> > +	status = "okay";
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&usb3_host_en>;
> > +};
> > +
> > +&usbdrd_dwc3_0 {
> > +	status = "okay";
> > +};
> > +
> > +&usbdrd_dwc3_1 {
> > +	snps,dis-u3-autosuspend-quirk;
> > +	status = "okay";
> > +};
> > +
> > -- 
> > 2.17.1
> > 
> > 
> > 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH v1 1/1] arm64: dts: rockchip: Add support for TB-96AI board
  2019-07-17 15:47 ` Manivannan Sadhasivam
  2019-07-17 15:49   ` Manivannan Sadhasivam
@ 2019-07-17 17:50   ` Heiko Stübner
  1 sibling, 0 replies; 4+ messages in thread
From: Heiko Stübner @ 2019-07-17 17:50 UTC (permalink / raw)
  To: Manivannan Sadhasivam
  Cc: mark.rutland, devicetree, linux-kernel, Elon Zhang,
	linux-rockchip, robh+dt, linux-arm-kernel

Hi Elon,

Am Mittwoch, 17. Juli 2019, 17:47:52 CEST schrieb Manivannan Sadhasivam:
> Thanks for the patch. Overall, this patch needs a bit of cleanup. There
> are many nodes added which are not available in mainline.
> 
> Please see comments inline.

What Manivannan said, plus some additional things inline.


> On Thu, Jul 11, 2019 at 10:12:09AM +0800, Elon Zhang wrote:
> > Add devicetree support for RK3399Pro TB-96AI board, one of
> > the 96Boards family.
> > 
> > The TB-96AI board is a 96Boards Compute SOM design, launched
> > by Linaro, Rockchip and Beiqicloud.
> > 
> > More information can be obtained from the following websites:
> > 1.https://www.96boards.org/product/tb-96ai/
> > 2.http://t.rock-chips.com/
> > 3.http://www.beiqicloud.com/
> > 
> > This patch add basic node for the board and support booting up
> > to Fedora.
> > 
> > Signed-off-by: Elon Zhang <zhangzj@rock-chips.com>
> > 
> > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> > index 5f2687acbf94..3d6c8d4363b5 100644
> > --- a/arch/arm64/boot/dts/rockchip/Makefile
> > +++ b/arch/arm64/boot/dts/rockchip/Makefile
> > @@ -27,3 +27,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
> > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-tb-96ai.dtb
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
> > new file mode 100644
> > index 000000000000..1935df99065d
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
> > @@ -0,0 +1,629 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
> > + */
> > +
> > +/dts-v1/;
> > +#include "rk3399pro.dtsi"
> > +#include "rk3399-opp.dtsi"
> > +
> > +/ {
> > +	compatible = "rockchip,rk3399pro-tb-96ai", "rockchip,rk3399pro";
> > +
> 
> I think the manufacturer of this board is, Xiamen Beiqi Technology Co. Ltd.
> So, the compatible should be:
> 
> compatible = "beiqui,rk3399pro-tb-96ai", "rockchip,rk3399pro";
> 
> And there should a separate patch to add the vendor prefix. You can refer
> below patch:
> 
> https://lkml.org/lkml/2019/7/17/39
> 
> > +	chosen {
> > +		stdout-path = "serial2:1500000n8";
> > +	};
> > +
> > +	xin32k: xin32k {
> > +		compatible = "fixed-clock";
> > +		clock-frequency = <32768>;
> > +		clock-output-names = "xin32k";
> > +		#clock-cells = <0>;
> > +	};
> > +
> > +	vcc_phy: vcc-phy-regulator {
> > +		compatible = "regulator-fixed";
> > +		regulator-name = "vcc_phy";
> > +		regulator-always-on;
> > +		regulator-boot-on;
> > +	};

please model a real power-tree following the board-schematics.
This dangling unconnected vcc_phy regulator is a good
indicator of things just being copied from the vendor bsp devicetree.

So from a power-input down through the different converters
that generate the subvoltages. And please also use the real
voltage-rail-names used in the schematics.

For reference just look at most rockchip arm64 boards
(rk3399-rock960, rk3399-puma and a lot more)

And if you look at regulator/regulator_summary in debugfs,
it should create an actual tree structure ;-) .


> > +	vcc5v0_sys: vccsys {
> > +		compatible = "regulator-fixed";
> > +		regulator-name = "vcc5v0_sys";
> > +		regulator-always-on;
> > +		regulator-boot-on;
> > +		regulator-min-microvolt = <5000000>;
> > +		regulator-max-microvolt = <5000000>;
> > +	};
> > +
> > +	vdd_log: vdd_log {
> > +		compatible = "regulator-fixed";
> > +		regulator-name = "vdd_log";
> > +		regulator-always-on;
> > +		regulator-boot-on;
> > +		regulator-min-microvolt = <900000>;
> > +		regulator-max-microvolt = <900000>;
> > +	};
> > +
> > +	leds: gpio-leds {
> > +		compatible = "gpio-leds";
> > +		pinctrl-names = "default";
> > +		pinctrl-0 =<&leds_gpio>;
> 
> Leave a space after =
> 
> > +
> > +		led@1 {
> > +			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
> > +			label = "system_work_led1";
> > +			retain-state-suspended;
> > +		};
> > +
> 
> We are using a standard LED formats for all 96Boards. Please see,
> rk3399-rock960.dts for reference. Since there is only user leds
> (apart from power leds), just define those as per the format.
> 
> > +		led@2 {
> > +			gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
> > +			label = "system_work_led2";
> > +			retain-state-suspended;
> > +		};
> > +
> > +		led@3 {
> > +			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
> > +			label = "system_work_led3";
> > +			retain-state-suspended;
> > +		};
> > +	};
> > +};
> > +
> > +&cpu_l0 {
> > +	cpu-supply = <&vdd_cpu_l>;
> > +};
> > +
> > +&cpu_l1 {
> > +	cpu-supply = <&vdd_cpu_l>;
> > +};
> > +
> > +&cpu_l2 {
> > +	cpu-supply = <&vdd_cpu_l>;
> > +};
> > +
> > +&cpu_l3 {
> > +	cpu-supply = <&vdd_cpu_l>;
> > +};
> > +
> > +&cpu_b0 {
> > +	cpu-supply = <&vdd_cpu_b>;
> > +};
> > +
> > +&cpu_b1 {
> > +	cpu-supply = <&vdd_cpu_b>;
> > +};
> > +
> > +&emmc_phy {
> > +	status = "okay";
> > +};
> > +
> > +&i2c0 {
> > +	status = "okay";
> > +	i2c-scl-rising-time-ns = <180>;
> > +	i2c-scl-falling-time-ns = <30>;
> > +	clock-frequency = <400000>;
> > +
> > +	rk809: pmic@20 {
> > +		compatible = "rockchip,rk809";
> 
> It looks like this driver is not present in mainline yet. I can see
> some old patches in lkml archive but not sure about the status of those.
> So, please remove this node and use dummy regulators where applicable.

Actually the rk809 support went in just this merge-window some days ago.
So we're good here.

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e444f6d68c07bc01a3a3d5905409dbe1ca391d26


> > +		reg = <0x20>;
> > +		interrupt-parent = <&gpio1>;
> > +		interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
> > +		pinctrl-names = "default", "pmic-sleep",
> > +				"pmic-power-off", "pmic-reset";
> > +		pinctrl-0 = <&pmic_int_l>;
> > +		pinctrl-1 = <&soc_slppin_slp>, <&rk809_slppin_slp>;
> > +		pinctrl-2 = <&soc_slppin_gpio>, <&rk809_slppin_pwrdn>;
> > +		pinctrl-3 = <&soc_slppin_gpio>,<&rk809_slppin_null>;
> > +		rockchip,system-power-controller;
> > +		pmic-reset-func = <1>;
> > +		wakeup-source;
> > +		#clock-cells = <1>;
> > +		clock-output-names = "rk808-clkout1", "rk808-clkout2";
> > +
> > +		vcc1-supply = <&vcc5v0_sys>;
> > +		vcc2-supply = <&vcc5v0_sys>;
> > +		vcc3-supply = <&vcc5v0_sys>;
> > +		vcc4-supply = <&vcc5v0_sys>;
> > +		vcc5-supply = <&vcc_buck5>;
> > +		vcc6-supply = <&vcc_buck5>;
> > +		vcc7-supply = <&vcc3v3_sys>;
> > +		vcc8-supply = <&vcc3v3_sys>;
> > +		vcc9-supply = <&vcc5v0_sys>;
> > +
> > +		pwrkey {
> > +			status = "okay";
> > +		};
> > +
> > +		rtc {
> > +			status = "okay";
> > +		};
> > +
> > +		pinctrl_rk8xx: pinctrl_rk8xx {
> > +			gpio-controller;
> > +			#gpio-cells = <2>;
> > +
> > +			rk809_slppin_null: rk809_slppin_null {
> > +				pins = "gpio_slp";
> > +				function = "pin_fun0";
> > +			};
> > +
> > +			rk809_slppin_slp: rk809_slppin_slp {
> > +				pins = "gpio_slp";
> > +				function = "pin_fun1";
> > +			};
> > +
> > +			rk809_slppin_pwrdn: rk809_slppin_pwrdn {
> > +				pins = "gpio_slp";
> > +				function = "pin_fun2";
> > +			};
> > +
> > +			rk809_slppin_rst: rk809_slppin_rst {
> > +				pins = "gpio_slp";
> > +				function = "pin_fun3";
> > +			};
> > +		};
> > +
> > +		regulators {
> > +			vdd_center: DCDC_REG1 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <750000>;
> > +				regulator-max-microvolt = <1350000>;
> > +				regulator-initial-mode = <0x2>;
> > +				regulator-name = "vdd_center";
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +					regulator-suspend-microvolt = <900000>;
> > +				};
> > +			};
> > +
> > +			vdd_cpu_l: DCDC_REG2 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <750000>;
> > +				regulator-max-microvolt = <1350000>;
> > +				regulator-ramp-delay = <6001>;
> > +				regulator-initial-mode = <0x2>;
> > +				regulator-name = "vdd_cpu_l";
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +
> > +			vcc_ddr: DCDC_REG3 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-name = "vcc_ddr";
> > +				regulator-initial-mode = <0x2>;
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +				};
> > +			};
> > +
> > +			vcc3v3_sys: DCDC_REG4 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <3300000>;
> > +				regulator-max-microvolt = <3300000>;
> > +				regulator-initial-mode = <0x2>;
> > +				regulator-name = "vcc3v3_sys";
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +					regulator-suspend-microvolt = <3300000>;
> > +				};
> > +			};
> > +
> > +			vcc_buck5: DCDC_REG5 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <2200000>;
> > +				regulator-max-microvolt = <2200000>;
> > +				regulator-name = "vcc_buck5";
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +					regulator-suspend-microvolt = <2200000>;
> > +				};
> > +			};
> > +
> > +			vcca_0v9: LDO_REG1 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <900000>;
> > +				regulator-max-microvolt = <900000>;
> > +				regulator-name = "vcca_0v9";
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +
> > +			vcc_1v8: LDO_REG2 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <1800000>;
> > +				regulator-max-microvolt = <1800000>;
> > +
> > +				regulator-name = "vcc_1v8";
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +					regulator-suspend-microvolt = <1800000>;
> > +				};
> > +			};
> > +
> > +			vcc0v9_soc: LDO_REG3 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <900000>;
> > +				regulator-max-microvolt = <900000>;
> > +
> > +				regulator-name = "vcc0v9_soc";
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +					regulator-suspend-microvolt = <900000>;
> > +				};
> > +			};
> > +
> > +			vcca_1v8: LDO_REG4 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <1800000>;
> > +				regulator-max-microvolt = <1800000>;
> > +
> > +				regulator-name = "vcca_1v8";
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +
> > +			vdd1v5_dvp: LDO_REG5 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <1500000>;
> > +				regulator-max-microvolt = <1500000>;
> > +
> > +				regulator-name = "vdd1v5_dvp";
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +
> > +			vcc_1v5: LDO_REG6 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <1500000>;
> > +				regulator-max-microvolt = <1500000>;
> > +
> > +				regulator-name = "vcc_1v5";
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +
> > +			vcc_3v0: LDO_REG7 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <3000000>;
> > +				regulator-max-microvolt = <3000000>;
> > +
> > +				regulator-name = "vcc_3v0";
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +
> > +			vccio_sd: LDO_REG8 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <1800000>;
> > +				regulator-max-microvolt = <3300000>;
> > +
> > +				regulator-name = "vccio_sd";
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +					regulator-suspend-microvolt = <3300000>;
> > +				};
> > +			};
> > +
> > +			vcc_sd: LDO_REG9 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <3300000>;
> > +				regulator-max-microvolt = <3300000>;
> > +
> > +				regulator-name = "vcc_sd";
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +					regulator-suspend-microvolt = <3300000>;
> > +				};
> > +			};
> > +
> > +			vcc5v0_usb: SWITCH_REG1 {
> > +				regulator-min-microvolt = <5000000>;
> > +				regulator-max-microvolt = <5000000>;
> > +
> > +				regulator-name = "vcc5v0_usb";
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +
> > +			vccio_3v3: SWITCH_REG2 {
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				regulator-min-microvolt = <3300000>;
> > +				regulator-max-microvolt = <3300000>;
> > +
> > +				regulator-name = "vccio_3v3";
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +		};
> > +	};
> > +
> > +	vdd_cpu_b: tcs452x@1c {
> > +		compatible = "tcs,tcs452x";
> 
> Again, there is no driver for this.
> 
> > +		reg = <0x1c>;
> > +		vin-supply = <&vcc5v0_sys>;
> > +		regulator-compatible = "fan53555-reg";
> > +		pinctrl-0 = <&vsel1_gpio>;
> > +		vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
> > +		regulator-name = "vdd_cpu_b";
> > +		regulator-min-microvolt = <712500>;
> > +		regulator-max-microvolt = <1500000>;
> > +		regulator-ramp-delay = <2300>;
> > +		fcs,suspend-voltage-selector = <1>;
> > +		regulator-always-on;
> > +		regulator-boot-on;
> > +		regulator-initial-state = <3>;
> > +		regulator-state-mem {
> > +			regulator-off-in-suspend;
> > +		};
> > +	};
> > +
> > +	vdd_gpu: tcs452x@10 {
> > +		compatible = "tcs,tcs452x";
> 
> ditto.
> 
> > +		status = "okay";
> > +		reg = <0x10>;
> > +		vin-supply = <&vcc5v0_sys>;
> > +		regulator-compatible = "fan53555-reg";
> > +		pinctrl-0 = <&vsel2_gpio>;
> > +		vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
> > +		regulator-name = "vdd_gpu";
> > +		regulator-min-microvolt = <735000>;
> > +		regulator-max-microvolt = <1400000>;
> > +		regulator-ramp-delay = <2300>;
> > +		fcs,suspend-voltage-selector = <1>;
> > +		regulator-always-on;
> > +		regulator-boot-on;
> > +		regulator-state-mem {
> > +			regulator-off-in-suspend;
> > +		};
> > +	};
> > +
> > +};
> > +
> > +&i2c8 {
> > +	status = "okay";
> > +	i2c-scl-rising-time-ns = <345>;
> > +	i2c-scl-falling-time-ns = <11>;
> > +	clock-frequency = <100000>;
> > +
> > +	fusb0: fusb30x@22 {
> > +		compatible = "fairchild,fusb302";
> 
> ditto, please remove.
> 
> > +		reg = <0x22>;
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&fusb0_int>;
> > +		int-n-gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
> > +		vbus-5v-gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_LOW>;
> > +		status = "okay";
> > +	};
> > +
> > +};
> > +
> > +&io_domains {
> > +	status = "okay";
> > +	bt656-supply = <&vcca_1v8>; /* APIO2_VDD */
> > +	audio-supply = <&vcca_1v8>; /* APIO5_VDD */
> > +	sdmmc-supply = <&vccio_sd>; /* SDMMC0_VDD */
> > +	gpio1830-supply = <&vcc_1v8>; /* APIO4_VDD */
> > +};
> > +
> > +&pinctrl {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&npu_ref_clk>;
> > +
> > +	fusb30x {
> > +		fusb0_int: fusb0-int {
> > +			rockchip,pins =
> > +				<1 RK_PA2 0 &pcfg_pull_up>;
> > +		};
> > +	};
> 
> not needed.
> 
> > +
> > +	gpio-leds {
> > +		leds_gpio: leds-gpio {
> > +			rockchip,pins =
> > +				<2 5 RK_FUNC_GPIO &pcfg_pull_up>,
> > +				<2 4 RK_FUNC_GPIO &pcfg_pull_up>,
> > +				<2 3 RK_FUNC_GPIO &pcfg_pull_up>;
> 
> I don't think we need pull-up here.
> 
> > +		};
> > +	};
> > +
> > +	npu_clk {
> > +		npu_ref_clk: npu-ref-clk {
> > +			rockchip,pins =
> > +				<0 RK_PA2 1 &pcfg_pull_none>;
> > +		};
> > +	};
> > +
> > +	pmic {
> > +		pmic_int_l: pmic-int-l {
> > +			rockchip,pins =
> > +				<1 RK_PC2 0 &pcfg_pull_up>;
> > +		};
> > +
> > +		soc_slppin_gpio: soc-slppin-gpio {
> > +			rockchip,pins =
> > +				<1 RK_PA5 0 &pcfg_output_low>;
> > +		};
> > +
> > +		soc_slppin_slp: soc-slppin-slp {
> > +			rockchip,pins =
> > +				<1 RK_PA5 1 &pcfg_pull_down>;
> > +		};
> > +
> > +		vsel1_gpio: vsel1-gpio {
> > +			rockchip,pins =
> > +				<1 RK_PC1 0 &pcfg_pull_down>;
> > +		};
> > +
> > +		vsel2_gpio: vsel2-gpio {
> > +			rockchip,pins =
> > +				<1 RK_PB6 0 &pcfg_pull_down>;
> > +		};
> > +	};
> 
> not needed.
> 
> > +
> > +	usb3 {
> > +		usb3_host_en: usb3-host-en {
> > +			rockchip,pins =
> > +				<2 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>;
> > +		};
> > +	};
> > +};
> > +
> > +&pmu_io_domains {
> > +	status = "okay";
> > +	pmu1830-supply = <&vcc_1v8>;
> > +};
> > +
> > +&pwm0 {
> > +	status = "okay";
> > +};
> > +
> > +&pwm2 {
> > +	status = "okay";
> > +};
> > +
> > +&saradc {
> > +	status = "okay";
> > +	vref-supply = <&vcc_1v8>;
> > +};
> > +
> > +&sdhci {
> > +	bus-width = <8>;
> > +	mmc-hs400-1_8v;
> > +	supports-emmc;
> 
> there is no such property, so please remove. Since this controller is
> used for emmc, you can use "no-sd" and "no-sdio" properties if needed.
> 
> > +	non-removable;
> > +	keep-power-in-suspend;
> > +	mmc-hs400-enhanced-strobe;
> > +	status = "okay";
> > +};
> > +
> > +&sdmmc {
> > +	clock-frequency = <150000000>;
> > +	clock-freq-min-max = <400000 150000000>;
> > +	supports-sd;
> 
> Same as above, property not available. Use, "no-sdio" and "no-emmc" if
> needed.
> 
> > +	bus-width = <4>;
> > +	cap-mmc-highspeed;
> > +	cap-sd-highspeed;
> > +	disable-wp;
> > +	num-slots = <1>;
> 
> not needed.
> 
> > +	vqmmc-supply = <&vccio_sd>;
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
> > +	status = "okay";
> > +};
> > +
> > +&tcphy0 {
> > +	extcon = <&fusb0>;

this comes from the vendor kernel, which mimiks the old chrome-os
of having a extcon and not using the newer type-c framework.
So drop this please.


Heiko

> > +	status = "okay";
> > +};
> > +
> > +&tcphy1 {
> > +	status = "okay";
> > +};
> > +
> > +&tsadc {
> > +	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
> > +	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
> 
> Any clue about shutdown temperature? Not necessary now but good to have.
> 
> Thanks,
> Mani
> > +	status = "okay";
> > +};
> > +
> > +&u2phy0 {
> > +	status = "okay";
> > +	extcon = <&fusb0>;
> > +
> > +	u2phy0_otg: otg-port {
> > +		status = "okay";
> > +	};
> > +
> > +	u2phy0_host: host-port {
> > +		phy-supply = <&vcc5v0_usb>;
> > +		status = "okay";
> > +	};
> > +};
> > +
> > +&u2phy1 {
> > +	status = "okay";
> > +
> > +	u2phy1_otg: otg-port {
> > +		status = "okay";
> > +	};
> > +
> > +	u2phy1_host: host-port {
> > +		phy-supply = <&vcc5v0_usb>;
> > +		status = "okay";
> > +	};
> > +};
> > +
> > +&uart0 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&uart0_xfer &uart0_cts>;
> > +	status = "okay";
> > +};
> > +
> > +&uart2 {
> > +	status = "okay";
> > +};
> > +
> > +&uart4 {
> > +	status = "okay";
> > +};
> > +
> > +&usb_host0_ehci {
> > +	status = "okay";
> > +};
> > +
> > +&usb_host1_ehci {
> > +	status = "okay";
> > +};
> > +
> > +&usb_host0_ohci {
> > +	status = "okay";
> > +};
> > +
> > +&usb_host1_ohci {
> > +	status = "okay";
> > +};
> > +
> > +&usbdrd3_0 {
> > +	extcon = <&fusb0>;
> > +	status = "okay";
> > +};
> > +
> > +&usbdrd3_1 {
> > +	status = "okay";
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&usb3_host_en>;
> > +};
> > +
> > +&usbdrd_dwc3_0 {
> > +	status = "okay";
> > +};
> > +
> > +&usbdrd_dwc3_1 {
> > +	snps,dis-u3-autosuspend-quirk;
> > +	status = "okay";
> > +};
> > +
> 





_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, back to index

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-11  2:12 [PATCH v1 1/1] arm64: dts: rockchip: Add support for TB-96AI board Elon Zhang
2019-07-17 15:47 ` Manivannan Sadhasivam
2019-07-17 15:49   ` Manivannan Sadhasivam
2019-07-17 17:50   ` Heiko Stübner

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org infradead-linux-arm-kernel@archiver.kernel.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox