[PATCH v5 06/12] drm/modes: Support modes names on the command line

[Maxime Ripard <maxime.ripard@bootlin.com>]

From: Maxime Ripard <maxime.ripard@free-electrons.com>

The drm subsystem also uses the video= kernel parameter, and in the
documentation refers to the fbdev documentation for that parameter.

However, that documentation also says that instead of giving the mode using
its resolution we can also give a name. However, DRM doesn't handle that
case at the moment. Even though in most case it shouldn't make any
difference, it might be useful for analog modes, where different standards
might have the same resolution, but still have a few different parameters
that are not encoded in the modes (NTSC vs NTSC-J vs PAL-M for example).

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 drivers/gpu/drm/drm_client_modeset.c |  4 ++-
 drivers/gpu/drm/drm_connector.c      |  3 +-
 drivers/gpu/drm/drm_modes.c          | 62 +++++++++++++++++++++--------
 include/drm/drm_connector.h          |  7 +++-
 4 files changed, 59 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c
index 4869a0170bec..33d4988f22ae 100644
--- a/drivers/gpu/drm/drm_client_modeset.c
+++ b/drivers/gpu/drm/drm_client_modeset.c
@@ -149,6 +149,10 @@ drm_connector_pick_cmdline_mode(struct drm_connector *connector)
 	prefer_non_interlace = !cmdline_mode->interlace;
 again:
 	list_for_each_entry(mode, &connector->modes, head) {
+		/* Check (optional) mode name first */
+		if (!strcmp(mode->name, cmdline_mode->name))
+			return mode;
+
 		/* check width/height */
 		if (mode->hdisplay != cmdline_mode->xres ||
 		    mode->vdisplay != cmdline_mode->yres)
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 3ccdcf3dfcde..3afed5677946 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -139,8 +139,9 @@ static void drm_connector_get_cmdline_mode(struct drm_connector *connector)
 		connector->force = mode->force;
 	}
 
-	DRM_DEBUG_KMS("cmdline mode for connector %s %dx%d@%dHz%s%s%s\n",
+	DRM_DEBUG_KMS("cmdline mode for connector %s %s %dx%d@%dHz%s%s%s\n",
 		      connector->name,
+		      mode->name ? mode->name : "",
 		      mode->xres, mode->yres,
 		      mode->refresh_specified ? mode->refresh : 60,
 		      mode->rb ? " reduced blanking" : "",
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 6debbd6c1763..429d3be17800 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -1580,7 +1580,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 					       struct drm_cmdline_mode *mode)
 {
 	const char *name;
-	bool parse_extras = false;
+	bool named_mode = false, parse_extras = false;
 	unsigned int bpp_off = 0, refresh_off = 0;
 	unsigned int mode_end = 0;
 	char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
@@ -1599,8 +1599,22 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 
 	name = mode_option;
 
-	if (!isdigit(name[0]))
-		return false;
+	/*
+	 * This is a bit convoluted. To differentiate between the
+	 * named modes and poorly formatted resolutions, we need a
+	 * bunch of things:
+	 *   - We need to make sure that the first character (which
+	 *     would be our resolution in X) is a digit.
+	 *   - However, if the X resolution is missing, then we end up
+	 *     with something like x<yres>, with our first character
+	 *     being an alpha-numerical character, which would be
+	 *     considered a named mode.
+	 *
+	 * If this isn't enough, we should add more heuristics here,
+	 * and matching unit-tests.
+	 */
+	if (!isdigit(name[0]) && name[0] != 'x')
+		named_mode = true;
 
 	/* Try to locate the bpp and refresh specifiers, if any */
 	bpp_ptr = strchr(name, '-');
@@ -1611,6 +1625,9 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 
 	refresh_ptr = strchr(name, '@');
 	if (refresh_ptr) {
+		if (named_mode)
+			return false;
+
 		refresh_off = refresh_ptr - name;
 		mode->refresh_specified = true;
 	}
@@ -1627,12 +1644,16 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 		parse_extras = true;
 	}
 
-	ret = drm_mode_parse_cmdline_res_mode(name, mode_end,
-					      parse_extras,
-					      connector,
-					      mode);
-	if (ret)
-		return false;
+	if (named_mode) {
+		strncpy(mode->name, name, mode_end);
+	} else {
+		ret = drm_mode_parse_cmdline_res_mode(name, mode_end,
+						      parse_extras,
+						      connector,
+						      mode);
+		if (ret)
+			return false;
+	}
 	mode->specified = true;
 
 	if (bpp_ptr) {
@@ -1660,14 +1681,23 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 		extra_ptr = refresh_end_ptr;
 
 	if (extra_ptr) {
-		int remaining = strlen(name) - (extra_ptr - name);
+		if (!named_mode) {
+			int len = strlen(name) - (extra_ptr - name);
 
-		/*
-		 * We still have characters to process, while
-		 * we shouldn't have any
-		 */
-		if (remaining > 0)
-			return false;
+			ret = drm_mode_parse_cmdline_extra(extra_ptr, len,
+							   connector, mode);
+			if (ret)
+				return false;
+		} else {
+			int remaining = strlen(name) - (extra_ptr - name);
+
+			/*
+			 * We still have characters to process, while
+			 * we shouldn't have any
+			 */
+			if (remaining > 0)
+				return false;
+		}
 	}
 
 	return true;
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index c802780b0bfc..cdf2fb910010 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -933,6 +933,13 @@ struct drm_connector_funcs {
  */
 struct drm_cmdline_mode {
 	/**
+	 * @name:
+	 *
+	 * Name of the mode.
+	 */
+	char name[DRM_DISPLAY_MODE_LEN];
+
+	/**
 	 * @specified:
 	 *
 	 * Has a mode been read from the command-line?
-- 
git-series 0.9.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel