Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Heiko Stuebner <heiko@sntech.de>
To: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Cc: linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] arm64: dts: rockchip: add HDMI sound node for rk3328-rock64
Date: Sun, 03 Feb 2019 10:06:38 +0100
Message-ID: <1970132.3b67tCGWFf@phil> (raw)
In-Reply-To: <20190202043444.9308-1-katsuhiro@katsuster.net>

Am Samstag, 2. Februar 2019, 05:34:44 CET schrieb Katsuhiro Suzuki:
> This patch adds HDMI sound (I2S0) node and remove dma properties
> from UART2 node for rock64.
> 
> The DMAC of rk3328 can use 8 channels at same time. Currently, total
> 7 channels are used as follows:
>   - I2S1  2ch
>   - UART2 2ch
>   - SPDIF 1ch
>   - SPI0  2ch
> 
> HDMI audio using I2S0 that requires 2ch but DMAC has only 1 channel.
> 
> UART2 can work without DMA resources, so this patch removes dma
> allocation for UART2 and reuses it to I2S0.

I don't follow that description. How can i2s0 re-use the uart2 dma channels?
Looking at the dma table in the TRM, uart2 has channels 6+7 while i2s0
uses channels 11+12. They should just run concurrently?

> 
> Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
> ---
>  .../arm64/boot/dts/rockchip/rk3328-rock64.dts | 24 ++++++++++++++++++-
>  arch/arm64/boot/dts/rockchip/rk3328.dtsi      |  1 +
>  2 files changed, 24 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
> index 2157a528276b..e21645aa3fa5 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
> @@ -68,7 +68,8 @@
>  	sound {
>  		compatible = "audio-graph-card";
>  		label = "rockchip,rk3328";
> -		dais = <&i2s1_p0
> +		dais = <&i2s0_p0
> +			&i2s1_p0
>  			&spdif_p0>;
>  	};
>  
> @@ -141,6 +142,12 @@
>  
>  &hdmi {
>  	status = "okay";
> +
> +	port@0 {
> +		hdmi_p0_0: endpoint {
> +			remote-endpoint = <&i2s0_p0_0>;
> +		};
> +	};
>  };
>  
>  &hdmiphy {
> @@ -256,6 +263,18 @@
>  	};
>  };
>  
> +&i2s0 {
> +	status = "okay";
> +
> +	i2s0_p0: port {
> +		i2s0_p0_0: endpoint {
> +			dai-format = "i2s";
> +			mclk-fs = <256>;
> +			remote-endpoint = <&hdmi_p0_0>;
> +		};
> +	};
> +};
> +
>  &i2s1 {
>  	status = "okay";
>  
> @@ -343,6 +362,9 @@
>  
>  &uart2 {
>  	status = "okay";
> +
> +	/delete-property/ dmas;
> +	/delete-property/ dma-names;
>  };
>  
>  &u2phy {
> diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> index 84f14b132e8f..374b5da93a35 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> @@ -665,6 +665,7 @@
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&hdmi_cec &hdmii2c_xfer &hdmi_hpd>;
>  		rockchip,grf = <&grf>;
> +		#sound-dai-cells = <0>;

please make that a separate patch


Heiko



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply index

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-02  4:34 Katsuhiro Suzuki
2019-02-03  9:06 ` Heiko Stuebner [this message]
2019-02-04 12:59   ` Katsuhiro Suzuki
2019-02-12 11:12     ` Heiko Stübner
2019-02-17 10:58       ` Katsuhiro Suzuki
2019-02-17 13:17         ` Heiko Stuebner

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1970132.3b67tCGWFf@phil \
    --to=heiko@sntech.de \
    --cc=katsuhiro@katsuster.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org infradead-linux-arm-kernel@archiver.kernel.org
	public-inbox-index linux-arm-kernel


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox