linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Suman Anna <s-anna@ti.com>
To: Dave Gerlach <d-gerlach@ti.com>, Nishanth Menon <nm@ti.com>
Cc: devicetree@vger.kernel.org, Vignesh Raghavendra <vigneshr@ti.com>,
	Tony Lindgren <tony@atomide.com>, Sekhar Nori <nsekhar@ti.com>,
	Kishon Vijay Abraham <kishon@ti.com>,
	Lokesh Vutla <lokeshvutla@ti.com>,
	Rob Herring <robh+dt@kernel.org>,
	Aswath Govindraju <a-govindraju@ti.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 3/5] arm64: dts: ti: Add support for AM642 SoC
Date: Thu, 21 Jan 2021 11:25:58 -0600	[thread overview]
Message-ID: <197af185-d2ea-3c76-d0bf-714485f8f195@ti.com> (raw)
In-Reply-To: <20210120202532.9011-4-d-gerlach@ti.com>

On 1/20/21 2:25 PM, Dave Gerlach wrote:
> The AM642 SoC belongs to the K3 Multicore SoC architecture platform,
> providing advanced system integration to enable applications such as
> Motor Drives, PLC, Remote IO and IoT Gateways.
> 
> Some highlights of this SoC are:
> * Dual Cortex-A53s in a single cluster, two clusters of dual Cortex-R5F
>   MCUs, and a single Cortex-M4F.
> * Two Gigabit Industrial Communication Subsystems (ICSSG).
> * Integrated Ethernet switch supporting up to a total of two external
>   ports.
> * PCIe-GEN2x1L, USB3/USB2, 2xCAN-FD, eMMC and SD, UFS, OSPI memory
>   controller, QSPI, I2C, eCAP/eQEP, ePWM, ADC, among other
>   peripherals.
> * Centralized System Controller for Security, Power, and Resource
>   Management (DMSC).
> 
> See AM64X Technical Reference Manual (SPRUIM2, Nov 2020)
> for further details: https://www.ti.com/lit/pdf/spruim2
> 
> Introduce basic support for the AM642 SoC to enable ramdisk or MMC
> boot. Introduce the sdhci, i2c, spi, and uart MAIN domain periperhals
> under cbass_main and the i2c, spi, and uart MCU domain periperhals
> under cbass_mcu.
> 
> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>

Hmm, there are a few pieces contributed by me, so please do add

Signed-off-by: Suman Anna <s-anna@ti.com>

> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 332 +++++++++++++++++++++++
>  arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi  |  76 ++++++
>  arch/arm64/boot/dts/ti/k3-am64.dtsi      | 103 +++++++
>  arch/arm64/boot/dts/ti/k3-am642.dtsi     |  65 +++++
>  4 files changed, 576 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/ti/k3-am64-main.dtsi
>  create mode 100644 arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
>  create mode 100644 arch/arm64/boot/dts/ti/k3-am64.dtsi
>  create mode 100644 arch/arm64/boot/dts/ti/k3-am642.dtsi
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> new file mode 100644
> index 000000000000..e3ef4bff04af
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> @@ -0,0 +1,332 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for AM642 SoC Family Main Domain peripherals
> + *
> + * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
> + */
> +
> +&cbass_main {
> +	oc_sram: sram@70000000 {
> +		compatible = "mmio-sram";
> +		reg = <0x00 0x70000000 0x00 0x200000>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x0 0x00 0x70000000 0x200000>;
> +
> +		atf-sram@0 {
> +			reg = <0x0 0x1a000>;
> +		};
> +	};
> +
> +	gic500: interrupt-controller@1800000 {
> +		compatible = "arm,gic-v3";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +		#interrupt-cells = <3>;
> +		interrupt-controller;
> +		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
> +		      <0x00 0x01840000 0x00 0xC0000>;	/* GICR */
> +		/*
> +		 * vcpumntirq:
> +		 * virtual CPU interface maintenance interrupt
> +		 */
> +		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +
> +		gic_its: msi-controller@1820000 {
> +			compatible = "arm,gic-v3-its";
> +			reg = <0x00 0x01820000 0x00 0x10000>;
> +			socionext,synquacer-pre-its = <0x1000000 0x400000>;
> +			msi-controller;
> +			#msi-cells = <1>;
> +		};
> +	};
> +
> +	dmss: dmss {
> +		compatible = "simple-mfd";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		dma-ranges;
> +		ranges;
> +
> +		secure_proxy_main: mailbox@4d000000 {
> +			compatible = "ti,am654-secure-proxy";
> +			#mbox-cells = <1>;
> +			reg-names = "target_data", "rt", "scfg";
> +			reg = <0x00 0x4d000000 0x00 0x80000>,
> +			      <0x00 0x4a600000 0x00 0x80000>,
> +			      <0x00 0x4a400000 0x00 0x80000>;
> +			interrupt-names = "rx_012";
> +			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> +		};
> +	};
> +
> +	dmsc: dmsc@44043000 {
> +		compatible = "ti,k2g-sci";
> +		ti,host-id = <12>;
> +		mbox-names = "rx", "tx";
> +		mboxes= <&secure_proxy_main 12>,
> +			<&secure_proxy_main 13>;
> +		reg-names = "debug_messages";
> +		reg = <0x00 0x44043000 0x00 0xfe0>;
> +
> +		k3_pds: power-controller {
> +			compatible = "ti,sci-pm-domain";
> +			#power-domain-cells = <2>;
> +		};
> +
> +		k3_clks: clocks {
> +			compatible = "ti,k2g-sci-clk";
> +			#clock-cells = <2>;
> +		};
> +
> +		k3_reset: reset-controller {
> +			compatible = "ti,sci-reset";
> +			#reset-cells = <2>;
> +		};
> +	};
> +
> +	main_pmx0: pinctrl@f4000 {
> +		compatible = "pinctrl-single";
> +		reg = <0x00 0xf4000 0x00 0x2d0>;
> +		#pinctrl-cells = <1>;
> +		pinctrl-single,register-width = <32>;
> +		pinctrl-single,function-mask = <0xffffffff>;
> +	};
> +
> +	main_conf: syscon@43000000 {
> +		compatible = "syscon", "simple-mfd";
> +		reg = <0x00 0x43000000 0x00 0x20000>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x00 0x00 0x43000000 0x20000>;
> +
> +		chipid@14 {
> +			compatible = "ti,am654-chipid";
> +			reg = <0x00000014 0x4>;
> +		};
> +	};
> +
> +	main_uart0: serial@2800000 {
> +		compatible = "ti,am64-uart", "ti,am654-uart";
> +		reg = <0x00 0x02800000 0x00 0x100>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
> +		clock-frequency = <48000000>;
> +		current-speed = <115200>;
> +		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 146 0>;
> +		clock-names = "fclk";
> +	};
> +
> +	main_uart1: serial@2810000 {
> +		compatible = "ti,am64-uart", "ti,am654-uart";
> +		reg = <0x00 0x02810000 0x00 0x100>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
> +		clock-frequency = <48000000>;
> +		current-speed = <115200>;
> +		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 152 0>;
> +		clock-names = "fclk";
> +	};
> +
> +	main_uart2: serial@2820000 {
> +		compatible = "ti,am64-uart", "ti,am654-uart";
> +		reg = <0x00 0x02820000 0x00 0x100>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
> +		clock-frequency = <48000000>;
> +		current-speed = <115200>;
> +		power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 153 0>;
> +		clock-names = "fclk";
> +	};
> +
> +	main_uart3: serial@2830000 {
> +		compatible = "ti,am64-uart", "ti,am654-uart";
> +		reg = <0x00 0x02830000 0x00 0x100>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
> +		clock-frequency = <48000000>;
> +		current-speed = <115200>;
> +		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 154 0>;
> +		clock-names = "fclk";
> +	};
> +
> +	main_uart4: serial@2840000 {
> +		compatible = "ti,am64-uart", "ti,am654-uart";
> +		reg = <0x00 0x02840000 0x00 0x100>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
> +		clock-frequency = <48000000>;
> +		current-speed = <115200>;
> +		power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 155 0>;
> +		clock-names = "fclk";
> +	};
> +
> +	main_uart5: serial@2850000 {
> +		compatible = "ti,am64-uart", "ti,am654-uart";
> +		reg = <0x00 0x02850000 0x00 0x100>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
> +		clock-frequency = <48000000>;
> +		current-speed = <115200>;
> +		power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 156 0>;
> +		clock-names = "fclk";
> +	};
> +
> +	main_uart6: serial@2860000 {
> +		compatible = "ti,am64-uart", "ti,am654-uart";
> +		reg = <0x00 0x02860000 0x00 0x100>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
> +		clock-frequency = <48000000>;
> +		current-speed = <115200>;
> +		power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 158 0>;
> +		clock-names = "fclk";
> +	};
> +
> +	main_i2c0: i2c@20000000 {
> +		compatible = "ti,am64-i2c", "ti,omap4-i2c";
> +		reg = <0x00 0x20000000 0x00 0x100>;
> +		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 102 2>;
> +		clock-names = "fck";
> +	};
> +
> +	main_i2c1: i2c@20010000 {
> +		compatible = "ti,am64-i2c", "ti,omap4-i2c";
> +		reg = <0x00 0x20010000 0x00 0x100>;
> +		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 103 2>;
> +		clock-names = "fck";
> +	};
> +
> +	main_i2c2: i2c@20020000 {
> +		compatible = "ti,am64-i2c", "ti,omap4-i2c";
> +		reg = <0x00 0x20020000 0x00 0x100>;
> +		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 104 2>;
> +		clock-names = "fck";
> +	};
> +
> +	main_i2c3: i2c@20030000 {
> +		compatible = "ti,am64-i2c", "ti,omap4-i2c";
> +		reg = <0x00 0x20030000 0x00 0x100>;
> +		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 105 2>;
> +		clock-names = "fck";
> +	};
> +
> +	main_spi0: spi@20100000 {
> +		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
> +		reg = <0x00 0x20100000 0x00 0x400>;
> +		interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 141 0>;
> +		dmas = <&main_pktdma 0xc300 0>, <&main_pktdma 0x4300 0>;
> +		dma-names = "tx0", "rx0";
> +	};
> +
> +	main_spi1: spi@20110000 {
> +		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
> +		reg = <0x00 0x20110000 0x00 0x400>;
> +		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 142 0>;
> +	};
> +
> +	main_spi2: spi@20120000 {
> +		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
> +		reg = <0x00 0x20120000 0x00 0x400>;
> +		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 143 0>;
> +	};
> +
> +	main_spi3: spi@20130000 {
> +		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
> +		reg = <0x00 0x20130000 0x00 0x400>;
> +		interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		power-domains = <&k3_pds 144 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 144 0>;
> +	};
> +
> +	main_spi4: spi@20140000 {
> +		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
> +		reg = <0x00 0x20140000 0x00 0x400>;
> +		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		power-domains = <&k3_pds 145 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 145 0>;
> +	};
> +
> +	sdhci0: mmc@fa10000 {
> +		compatible = "ti,am64-sdhci-8bit";

Hmm, I tried booting this series on top of 5.11-rc1 + Nishanth's current
ti-k3-dts-next. So, boot of these patches using this baseline fails when using
MMC rootfs, but is ok when using initramfs. This particular compatible and the
corresponding driver change are only in linux-next coming through couple of
patches from the MMC subsystem.

I am not sure why we would be including stuff that's dependent on some other
patches being merged from a different sub-system? Strangely, this ought to be
caught by dtbs_check, but it is not throwing any errors.

IMHO, these should only be added if you have no other external dependencies
especially when you are applying on a 5.11-rc baseline. The MMC pull-requests
would not go through arm-soc either.

regards
Suman

> +		reg = <0x00 0xfa10000 0x00 0x260>, <0x00 0xfa18000 0x00 0x134>;
> +		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
> +		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 57 0>, <&k3_clks 57 1>;
> +		clock-names = "clk_ahb", "clk_xin";
> +		mmc-ddr-1_8v;
> +		mmc-hs200-1_8v;
> +		mmc-hs400-1_8v;
> +		ti,trm-icp = <0x2>;
> +		ti,otap-del-sel-legacy = <0x0>;
> +		ti,otap-del-sel-mmc-hs = <0x0>;
> +		ti,otap-del-sel-ddr52 = <0x6>;
> +		ti,otap-del-sel-hs200 = <0x7>;
> +		ti,otap-del-sel-hs400 = <0x4>;
> +	};
> +
> +	sdhci1: mmc@fa00000 {
> +		compatible = "ti,am64-sdhci-4bit";
> +		reg = <0x00 0xfa00000 0x00 0x260>, <0x00 0xfa08000 0x00 0x134>;
> +		interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
> +		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 58 3>, <&k3_clks 58 4>;
> +		clock-names = "clk_ahb", "clk_xin";
> +		ti,trm-icp = <0x2>;
> +		ti,otap-del-sel-legacy = <0x0>;
> +		ti,otap-del-sel-sd-hs = <0xf>;
> +		ti,otap-del-sel-sdr12 = <0xf>;
> +		ti,otap-del-sel-sdr25 = <0xf>;
> +		ti,otap-del-sel-sdr50 = <0xc>;
> +		ti,otap-del-sel-sdr104 = <0x6>;
> +		ti,otap-del-sel-ddr50 = <0x9>;
> +		ti,clkbuf-sel = <0x7>;
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
> new file mode 100644
> index 000000000000..1d2be485a669
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
> @@ -0,0 +1,76 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for AM64 SoC Family MCU Domain peripherals
> + *
> + * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
> + */
> +
> +&cbass_mcu {
> +	mcu_uart0: serial@4a00000 {
> +		compatible = "ti,am64-uart", "ti,am654-uart";
> +		reg = <0x00 0x04a00000 0x00 0x100>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
> +		clock-frequency = <48000000>;
> +		current-speed = <115200>;
> +		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 149 0>;
> +		clock-names = "fclk";
> +	};
> +
> +	mcu_uart1: serial@4a10000 {
> +		compatible = "ti,am64-uart", "ti,am654-uart";
> +		reg = <0x00 0x04a10000 0x00 0x100>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
> +		clock-frequency = <48000000>;
> +		current-speed = <115200>;
> +		power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 160 0>;
> +		clock-names = "fclk";
> +	};
> +
> +	mcu_i2c0: i2c@4900000 {
> +		compatible = "ti,am64-i2c", "ti,omap4-i2c";
> +		reg = <0x00 0x04900000 0x00 0x100>;
> +		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 106 2>;
> +		clock-names = "fck";
> +	};
> +
> +	mcu_i2c1: i2c@4910000 {
> +		compatible = "ti,am64-i2c", "ti,omap4-i2c";
> +		reg = <0x00 0x04910000 0x00 0x100>;
> +		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 107 2>;
> +		clock-names = "fck";
> +	};
> +
> +	mcu_spi0: spi@4b00000 {
> +		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
> +		reg = <0x00 0x04b00000 0x00 0x400>;
> +		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 147 0>;
> +	};
> +
> +	mcu_spi1: spi@4b10000 {
> +		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
> +		reg = <0x00 0x04b10000 0x00 0x400>;
> +		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 148 0>;
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/ti/k3-am64.dtsi b/arch/arm64/boot/dts/ti/k3-am64.dtsi
> new file mode 100644
> index 000000000000..0ae8c844c482
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am64.dtsi
> @@ -0,0 +1,103 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for AM642 SoC Family
> + *
> + * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/pinctrl/k3.h>
> +#include <dt-bindings/soc/ti,sci_pm_domain.h>
> +
> +/ {
> +	model = "Texas Instruments K3 AM642 SoC";
> +	compatible = "ti,am642";
> +	interrupt-parent = <&gic500>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	aliases {
> +		serial0 = &mcu_uart0;
> +		serial1 = &mcu_uart1;
> +		serial2 = &main_uart0;
> +		serial3 = &main_uart1;
> +		serial4 = &main_uart2;
> +		serial5 = &main_uart3;
> +		serial6 = &main_uart4;
> +		serial7 = &main_uart5;
> +		serial8 = &main_uart6;
> +	};
> +
> +	chosen { };
> +
> +	firmware {
> +		optee {
> +			compatible = "linaro,optee-tz";
> +			method = "smc";
> +		};
> +
> +		psci: psci {
> +			compatible = "arm,psci-1.0";
> +			method = "smc";
> +		};
> +	};
> +
> +	a53_timer0: timer-cl0-cpu0 {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
> +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
> +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
> +			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
> +	};
> +
> +	pmu: pmu {
> +		compatible = "arm,cortex-a53-pmu";
> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	cbass_main: bus@f4000 {
> +		compatible = "simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges = <0x00 0x000f4000 0x00 0x000f4000 0x00 0x000002d0>, /* PINCTRL */
> +			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
> +			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */
> +			 <0x00 0x01000000 0x00 0x01000000 0x00 0x02330400>, /* First peripheral window */
> +			 <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */
> +			 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x00800000>, /* PCIE_CORE */
> +			 <0x00 0x0f000000 0x00 0x0f000000 0x00 0x00c44200>, /* Second peripheral window */
> +			 <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */
> +			 <0x00 0x30000000 0x00 0x30000000 0x00 0x000bc100>, /* ICSSG0/1 */
> +			 <0x00 0x37000000 0x00 0x37000000 0x00 0x00040000>, /* TIMERMGR0 TIMERS */
> +			 <0x00 0x39000000 0x00 0x39000000 0x00 0x00000400>, /* CPTS0 */
> +			 <0x00 0x3b000000 0x00 0x3b000000 0x00 0x00000400>, /* GPMC0_CFG */
> +			 <0x00 0x3cd00000 0x00 0x3cd00000 0x00 0x00000200>, /* TIMERMGR0_CONFIG */
> +			 <0x00 0x3f004000 0x00 0x3f004000 0x00 0x00000400>, /* GICSS0_REGS */
> +			 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, /* CTRL_MMR0 */
> +			 <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */
> +			 <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMASS */
> +			 <0x00 0x50000000 0x00 0x50000000 0x00 0x08000000>, /* GPMC0 DATA */
> +			 <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */
> +			 <0x00 0x68000000 0x00 0x68000000 0x00 0x08000000>, /* PCIe DAT0 */
> +			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>, /* OC SRAM */
> +			 <0x00 0x78000000 0x00 0x78000000 0x00 0x00800000>, /* Main R5FSS */
> +			 <0x06 0x00000000 0x06 0x00000000 0x01 0x00000000>, /* PCIe DAT1 */
> +			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */
> +
> +			 /* MCU Domain Range */
> +			 <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>;
> +
> +		cbass_mcu: bus@4000000 {
> +			compatible = "simple-bus";
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>; /* Peripheral window */
> +		};
> +	};
> +};
> +
> +/* Now include the peripherals for each bus segments */
> +#include "k3-am64-main.dtsi"
> +#include "k3-am64-mcu.dtsi"
> diff --git a/arch/arm64/boot/dts/ti/k3-am642.dtsi b/arch/arm64/boot/dts/ti/k3-am642.dtsi
> new file mode 100644
> index 000000000000..e2b397c88401
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am642.dtsi
> @@ -0,0 +1,65 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for AM642 SoC family in Dual core configuration
> + *
> + * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
> + */
> +
> +/dts-v1/;
> +
> +#include "k3-am64.dtsi"
> +
> +/ {
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu-map {
> +			cluster0: cluster0 {
> +				core0 {
> +					cpu = <&cpu0>;
> +				};
> +
> +				core1 {
> +					cpu = <&cpu1>;
> +				};
> +			};
> +		};
> +
> +		cpu0: cpu@0 {
> +			compatible = "arm,cortex-a53";
> +			reg = <0x000>;
> +			device_type = "cpu";
> +			enable-method = "psci";
> +			i-cache-size = <0x8000>;
> +			i-cache-line-size = <64>;
> +			i-cache-sets = <256>;
> +			d-cache-size = <0x8000>;
> +			d-cache-line-size = <64>;
> +			d-cache-sets = <128>;
> +			next-level-cache = <&L2_0>;
> +		};
> +
> +		cpu1: cpu@1 {
> +			compatible = "arm,cortex-a53";
> +			reg = <0x001>;
> +			device_type = "cpu";
> +			enable-method = "psci";
> +			i-cache-size = <0x8000>;
> +			i-cache-line-size = <64>;
> +			i-cache-sets = <256>;
> +			d-cache-size = <0x8000>;
> +			d-cache-line-size = <64>;
> +			d-cache-sets = <128>;
> +			next-level-cache = <&L2_0>;
> +		};
> +	};
> +
> +	L2_0: l2-cache0 {
> +		compatible = "cache";
> +		cache-level = <2>;
> +		cache-size = <0x40000>;
> +		cache-line-size = <64>;
> +		cache-sets = <512>;
> +	};
> +};
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-01-21 17:28 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-20 20:25 [PATCH v3 0/5] arm64: Initial support for Texas Instruments AM642 Platform Dave Gerlach
2021-01-20 20:25 ` [PATCH v3 1/5] dt-bindings: arm: ti: Add bindings for AM642 SoC Dave Gerlach
2021-01-20 20:25 ` [PATCH v3 2/5] dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64 Dave Gerlach
2021-01-20 20:50   ` Suman Anna
2021-01-25 14:39   ` Nishanth Menon
2021-02-09  2:34   ` Rob Herring
2021-01-20 20:25 ` [PATCH v3 3/5] arm64: dts: ti: Add support for AM642 SoC Dave Gerlach
2021-01-20 22:04   ` Nishanth Menon
2021-01-21 17:25   ` Suman Anna [this message]
2021-01-21 17:46     ` Nishanth Menon
2021-01-21 18:13       ` Suman Anna
2021-01-21 18:39         ` Nishanth Menon
2021-01-21 19:57           ` Suman Anna
2021-01-21 20:13             ` Nishanth Menon
2021-01-21 20:42               ` Suman Anna
2021-01-21 21:18                 ` Nishanth Menon
2021-01-21 22:57                   ` Suman Anna
2021-01-22 11:23             ` Arnd Bergmann
2021-01-22 13:00               ` Tony Lindgren
2021-01-25 14:16                 ` Nishanth Menon
2021-01-25 22:48   ` Suman Anna
2021-01-25 23:02     ` Suman Anna
2021-01-20 20:25 ` [PATCH v3 4/5] arm64: dts: ti: k3-am64-main: Enable DMA support Dave Gerlach
2021-01-20 20:25 ` [PATCH v3 5/5] arm64: dts: ti: Add support for AM642 EVM Dave Gerlach
2021-01-25 16:44   ` Suman Anna

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=197af185-d2ea-3c76-d0bf-714485f8f195@ti.com \
    --to=s-anna@ti.com \
    --cc=a-govindraju@ti.com \
    --cc=d-gerlach@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=lokeshvutla@ti.com \
    --cc=nm@ti.com \
    --cc=nsekhar@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=tony@atomide.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).