From: Alexandre Torgue <alexandre.torgue@st.com>
To: <dillon.minfei@gmail.com>, <robh+dt@kernel.org>,
<p.zabel@pengutronix.de>, <mcoquelin.stm32@gmail.com>,
<thierry.reding@gmail.com>, <sam@ravnborg.org>,
<airlied@linux.ie>, <daniel@ffwll.ch>, <mturquette@baylibre.com>,
<sboyd@kernel.org>
Cc: devicetree@vger.kernel.org, linux-clk@vger.kernel.org,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-spi@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v5 0/8] Enable ili9341 and l3gd20 on stm32f429-disco
Date: Tue, 21 Jul 2020 11:19:47 +0200 [thread overview]
Message-ID: <198ad79c-ab12-55f0-814f-afc454a7e8ef@st.com> (raw)
In-Reply-To: <1590378062-7965-1-git-send-email-dillon.minfei@gmail.com>
Hi Dillon
On 5/25/20 5:40 AM, dillon.minfei@gmail.com wrote:
> From: dillon min <dillon.minfei@gmail.com>
>
> V5's update based on Mark Brown's suggestion, use 'SPI_MASTER_MUST_RX'
> for SPI_SIMPLEX_RX mode on stm32 spi controller.
>
> V5:
> 1 instead of add send dummy data out under SIMPLEX_RX mode,
> add flags 'SPI_CONTROLLER_MUST_TX' for stm32 spi driver
> 2 bypass 'SPI_CONTROLLER_MUST_TX' and 'SPI_CONTROLLER_MUST_RX' under
> 'SPI_3WIRE' mode
>
Concerning DT patches, they look goods for me. However I'll merge them
when drivers parts will be merged.
regards
Alex
> V4:
> According to alexandre torgue's suggestion, combine ili9341 and
> l3gd20's modification on stm32f429-disco board to one patchset.
>
> Changes:
>
> ili9341:
>
> 1 update ili9341 panel driver according to Linus's suggestion
> 2 drop V1's No.5 patch, sumbit new changes for clk-stm32f4
> 3 merge l3gd20's change to this patchset
>
> V3:
> 1 merge original tiny/ili9341.c driver to panel/panel-ilitek-ili9341.c
> to support serial spi & parallel rgb interface in one driver.
> 2 update ilitek,ili9341.yaml dts binding documentation.
> 3 update stm32f429-disco dts binding
>
> V2:
> 1 verify ilitek,ili9341.yaml with make O=../linux-stm32
> dt_binding_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/panel/
> ilitek,ili9341.yaml
>
> V1:
> 1 add ili9341 drm panel driver
> 2 add ltdc, spi5 controller for stm32f429-disco
> 3 add ltdc, spi5 pin map for stm32f429-disco
> 4 add docs about ili9341
> 5 fix ltdc driver loading hang in clk set rate bug
>
>
> L3gd20:
> V3:
> 1 merge stm32f429-disco dtbs binding with ili9341 part
>
> V2:
> 1 insert blank line at stm32f420-disco.dts line 143
> 2 add more description for l3gd20 in commit message
>
> V1:
> 1 enable spi5 controller on stm32f429-disco (dts)
> 2 add spi5 pinmap for stm32f429-disco (dts)
> 3 add SPI_SIMPLEX_RX, SPI_3WIRE_RX support for stm32f4
>
>
> dillon min (8):
> ARM: dts: stm32: Add dma config for spi5
> ARM: dts: stm32: Add pin map for ltdc & spi5 on stm32f429-disco board
> ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on
> stm32429-disco board
> dt-bindings: display: panel: Add ilitek ili9341 panel bindings
> clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate,
> fix duplicated ltdc clock register to 'clk_core' case ltdc's clock
> turn off by clk_disable_unused()
> drm/panel: Add ilitek ili9341 panel driver
> spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
> spi: flags 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX' can't
> be coexit with 'SPI_3WIRE' mode
>
> .../bindings/display/panel/ilitek,ili9341.yaml | 69 ++
> arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 67 +
> arch/arm/boot/dts/stm32f429-disco.dts | 48 +
> arch/arm/boot/dts/stm32f429.dtsi | 3 +
> drivers/clk/clk-stm32f4.c | 7 +-
> drivers/gpu/drm/panel/Kconfig | 12 +
> drivers/gpu/drm/panel/Makefile | 1 +
> drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 1301 ++++++++++++++++++++
> drivers/spi/spi-stm32.c | 19 +-
> drivers/spi/spi.c | 3 +-
> 10 files changed, 1521 insertions(+), 9 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
> create mode 100644 drivers/gpu/drm/panel/panel-ilitek-ili9341.c
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-07-21 9:21 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <broonie@kernel.org>
2020-05-25 3:40 ` [PATCH v5 0/8] Enable ili9341 and l3gd20 on stm32f429-disco dillon.minfei
2020-05-25 3:40 ` [PATCH v5 1/8] ARM: dts: stm32: Add dma config for spi5 dillon.minfei
2020-05-25 3:40 ` [PATCH v5 2/8] ARM: dts: stm32: Add pin map for ltdc & spi5 on stm32f429-disco board dillon.minfei
2020-05-25 3:40 ` [PATCH v5 3/8] ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on stm32429-disco board dillon.minfei
2020-05-25 3:40 ` [PATCH v5 4/8] dt-bindings: display: panel: Add ilitek ili9341 panel bindings dillon.minfei
2020-05-25 3:40 ` [PATCH v5 5/8] clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate, fix duplicated ltdc clock register to 'clk_core' case ltdc's clock turn off by clk_disable_unused() dillon.minfei
2020-05-25 3:41 ` [PATCH v5 6/8] drm/panel: Add ilitek ili9341 panel driver dillon.minfei
2020-05-25 3:41 ` [PATCH v5 7/8] spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4 dillon.minfei
2020-05-25 3:41 ` [PATCH v5 8/8] spi: flags 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX' can't be coexit with 'SPI_3WIRE' mode dillon.minfei
2020-07-21 9:19 ` Alexandre Torgue [this message]
2020-07-21 10:39 ` [PATCH v5 0/8] Enable ili9341 and l3gd20 on stm32f429-disco dillon min
2020-07-21 11:54 ` Alexandre Torgue
2020-07-21 12:55 ` dillon min
2020-07-21 12:58 ` Alexandre Torgue
2020-05-25 3:45 dillon.minfei
2020-05-26 9:19 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=198ad79c-ab12-55f0-814f-afc454a7e8ef@st.com \
--to=alexandre.torgue@st.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dillon.minfei@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=sboyd@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).