From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: Tony Lindgren <tony@atomide.com>, Thomas Gleixner <tglx@linutronix.de>
Cc: Keerthy <j-keerthy@ti.com>,
linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Tero Kristo <kristo@kernel.org>
Subject: Re: [PATCH 2/2] clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940
Date: Mon, 22 Mar 2021 11:15:06 +0100 [thread overview]
Message-ID: <1edba5bd-5408-c545-85ea-689b4171cb5b@linaro.org> (raw)
In-Reply-To: <20210304073737.15810-3-tony@atomide.com>
On 04/03/2021 08:37, Tony Lindgren wrote:
> There is a timer wrap issue on dra7 for the ARM architected timer.
> In a typical clock configuration the timer fails to wrap after 388 days.
>
> To work around the issue, we need to use timer-ti-dm percpu timers instead.
>
> Let's configure dmtimer3 and 4 as percpu timers by default, and warn about
> the issue if the dtb is not configured properly.
>
> Let's do this as a single patch so it can be backported to v5.8 and later
> kernels easily.
Cc: <stable@vger.kernel.org> # v5.8+
??
> Note that this patch depends on earlier timer-ti-dm
> systimer posted mode fixes, and a preparatory clockevent patch
> "clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue".
>
> For more information, please see the errata for "AM572x Sitara Processors
> Silicon Revisions 1.1, 2.0":
>
> https://www.ti.com/lit/er/sprz429m/sprz429m.pdf
>
> The concept is based on earlier reference patches done by Tero Kristo and
> Keerthy.
>
> Cc: Keerthy <j-keerthy@ti.com>
> Cc: Tero Kristo <kristo@kernel.org>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---
> arch/arm/boot/dts/dra7-l4.dtsi | 4 +-
> arch/arm/boot/dts/dra7.dtsi | 20 ++++++
> drivers/clocksource/timer-ti-dm-systimer.c | 76 ++++++++++++++++++++++
> include/linux/cpuhotplug.h | 1 +
> 4 files changed, 99 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
> --- a/arch/arm/boot/dts/dra7-l4.dtsi
> +++ b/arch/arm/boot/dts/dra7-l4.dtsi
> @@ -1168,7 +1168,7 @@ timer2: timer@0 {
> };
> };
>
> - target-module@34000 { /* 0x48034000, ap 7 46.0 */
> + timer3_target: target-module@34000 { /* 0x48034000, ap 7 46.0 */
> compatible = "ti,sysc-omap4-timer", "ti,sysc";
> reg = <0x34000 0x4>,
> <0x34010 0x4>;
> @@ -1195,7 +1195,7 @@ timer3: timer@0 {
> };
> };
>
> - target-module@36000 { /* 0x48036000, ap 9 4e.0 */
> + timer4_target: target-module@36000 { /* 0x48036000, ap 9 4e.0 */
> compatible = "ti,sysc-omap4-timer", "ti,sysc";
> reg = <0x36000 0x4>,
> <0x36010 0x4>;
> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> --- a/arch/arm/boot/dts/dra7.dtsi
> +++ b/arch/arm/boot/dts/dra7.dtsi
> @@ -46,6 +46,7 @@ aliases {
>
> timer {
> compatible = "arm,armv7-timer";
> + status = "disabled"; /* See ARM architected timer wrap erratum i940 */
> interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> @@ -1241,3 +1242,22 @@ timer@0 {
> assigned-clock-parents = <&sys_32k_ck>;
> };
> };
> +
> +/* Local timers, see ARM architected timer wrap erratum i940 */
> +&timer3_target {
> + ti,no-reset-on-init;
> + ti,no-idle;
> + timer@0 {
> + assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>;
> + assigned-clock-parents = <&timer_sys_clk_div>;
> + };
> +};
> +
> +&timer4_target {
> + ti,no-reset-on-init;
> + ti,no-idle;
> + timer@0 {
> + assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>;
> + assigned-clock-parents = <&timer_sys_clk_div>;
> + };
> +};
> diff --git a/drivers/clocksource/timer-ti-dm-systimer.c b/drivers/clocksource/timer-ti-dm-systimer.c
> --- a/drivers/clocksource/timer-ti-dm-systimer.c
> +++ b/drivers/clocksource/timer-ti-dm-systimer.c
> @@ -2,6 +2,7 @@
> #include <linux/clk.h>
> #include <linux/clocksource.h>
> #include <linux/clockchips.h>
> +#include <linux/cpuhotplug.h>
> #include <linux/interrupt.h>
> #include <linux/io.h>
> #include <linux/iopoll.h>
> @@ -634,6 +635,78 @@ static int __init dmtimer_clockevent_init(struct device_node *np)
> return error;
> }
>
> +/* Dmtimer as percpu timer. See dra7 ARM architected timer wrap erratum i940 */
> +static DEFINE_PER_CPU(struct dmtimer_clockevent, dmtimer_percpu_timer);
> +
> +static int __init dmtimer_percpu_timer_init(struct device_node *np, int cpu)
> +{
> + struct dmtimer_clockevent *clkevt;
> + int error;
> +
> + if (!cpu_possible(cpu))
> + return -EINVAL;
> +
> + if (!of_property_read_bool(np->parent, "ti,no-reset-on-init") ||
> + !of_property_read_bool(np->parent, "ti,no-idle"))
> + pr_warn("Incomplete dtb for percpu dmtimer %pOF\n", np->parent);
> +
> + clkevt = per_cpu_ptr(&dmtimer_percpu_timer, cpu);
> +
> + error = dmtimer_clkevt_init_common(clkevt, np, CLOCK_EVT_FEAT_ONESHOT,
> + cpumask_of(cpu), "percpu-dmtimer",
> + 500);
> + if (error)
> + return error;
> +
> + return 0;
> +}
> +
> +/* See TRM for timer internal resynch latency */
> +static int omap_dmtimer_starting_cpu(unsigned int cpu)
> +{
> + struct dmtimer_clockevent *clkevt = per_cpu_ptr(&dmtimer_percpu_timer, cpu);
> + struct clock_event_device *dev = &clkevt->dev;
> + struct dmtimer_systimer *t = &clkevt->t;
> +
> + clockevents_config_and_register(dev, t->rate, 3, ULONG_MAX);
> + irq_force_affinity(dev->irq, cpumask_of(cpu));
> +
> + return 0;
> +}
> +
> +static int __init dmtimer_percpu_timer_startup(void)
> +{
> + struct dmtimer_clockevent *clkevt = per_cpu_ptr(&dmtimer_percpu_timer, 0);
> + struct dmtimer_systimer *t = &clkevt->t;
> +
> + if (t->sysc) {
> + cpuhp_setup_state(CPUHP_AP_TI_GP_TIMER_STARTING,
> + "clockevents/omap/gptimer:starting",
> + omap_dmtimer_starting_cpu, NULL);
> + }
> +
> + return 0;
> +}
> +subsys_initcall(dmtimer_percpu_timer_startup);
> +
> +static int __init dmtimer_percpu_quirk_init(struct device_node *np, u32 pa)
> +{
> + struct device_node *arm_timer;
> +
> + arm_timer = of_find_compatible_node(NULL, NULL, "arm,armv7-timer");
> + if (of_device_is_available(arm_timer)) {
> + pr_warn_once("ARM architected timer wrap issue i940 detected\n");
> + return 0;
> + }
> +
> + if (pa == 0x48034000) /* dra7 dmtimer3 */
> + return dmtimer_percpu_timer_init(np, 0);
> + else if (pa == 0x48036000) /* dra7 dmtimer4 */
> + return dmtimer_percpu_timer_init(np, 1);
> +
> + return 0;
> +}
> +
> /* Clocksource */
> static struct dmtimer_clocksource *
> to_dmtimer_clocksource(struct clocksource *cs)
> @@ -767,6 +840,9 @@ static int __init dmtimer_systimer_init(struct device_node *np)
> if (clockevent == pa)
> return dmtimer_clockevent_init(np);
>
> + if (of_machine_is_compatible("ti,dra7"))
> + return dmtimer_percpu_quirk_init(np, pa);
> +
> return 0;
> }
>
> diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h
> --- a/include/linux/cpuhotplug.h
> +++ b/include/linux/cpuhotplug.h
> @@ -135,6 +135,7 @@ enum cpuhp_state {
> CPUHP_AP_RISCV_TIMER_STARTING,
> CPUHP_AP_CLINT_TIMER_STARTING,
> CPUHP_AP_CSKY_TIMER_STARTING,
> + CPUHP_AP_TI_GP_TIMER_STARTING,
> CPUHP_AP_HYPERV_TIMER_STARTING,
> CPUHP_AP_KVM_STARTING,
> CPUHP_AP_KVM_ARM_VGIC_INIT_STARTING,
>
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-03-22 10:17 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-04 7:37 [PATCH 0/2] Fixes for for dra7 timer wrap errata i940 Tony Lindgren
2021-03-04 7:37 ` [PATCH 1/2] clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue Tony Lindgren
2021-03-22 15:55 ` Daniel Lezcano
2021-03-22 16:33 ` Tony Lindgren
2021-03-22 18:23 ` Daniel Lezcano
2021-03-23 6:31 ` Tony Lindgren
2021-03-04 7:37 ` [PATCH 2/2] clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940 Tony Lindgren
2021-03-22 10:15 ` Daniel Lezcano [this message]
2021-03-22 10:17 ` Tony Lindgren
2021-03-23 7:43 [PATCHv2 0/2] Fixes for for " Tony Lindgren
2021-03-23 7:43 ` [PATCH 2/2] clocksource/drivers/timer-ti-dm: Handle " Tony Lindgren
2022-01-29 21:05 ` Drew Fustini
2022-01-31 10:16 ` Tony Lindgren
2022-02-02 20:54 ` Drew Fustini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1edba5bd-5408-c545-85ea-689b4171cb5b@linaro.org \
--to=daniel.lezcano@linaro.org \
--cc=j-keerthy@ti.com \
--cc=kristo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).