From mboxrd@z Thu Jan 1 00:00:00 1970 From: thomas.petazzoni@free-electrons.com (Thomas Petazzoni) Date: Wed, 20 Mar 2013 18:27:02 +0100 Subject: [PATCH for 3.9-rc] arm: mvebu: Use local interrupt only for the timer 0 In-Reply-To: References: <1363792175-3136-1-git-send-email-gregory.clement@free-electrons.com> Message-ID: <20130320182702.3dc3fa20@skate> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Dear Ryan Press, On Wed, 20 Mar 2013 09:44:42 -0700, Ryan Press wrote: > I can confirm this patch works for me as well. I still have the > problem on my Globalscale Mirabox where only a forced 10Mb link works > on tx/rx. With 100Mb only rx works, and 1Gb neither works. Did you test both network interfaces? Do you have the problem on both? I know there are issues on the Mirabox with the network interface that wasn't initialized by U-Boot (i.e if you tftp your kernel from interface 0, interface 0 works fine in Linux but not interface 1, if your tftp your kernel from interface 1, it's the opposite). Best regards, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com