linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: thomas.petazzoni@free-electrons.com (Thomas Petazzoni)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv3 0/7] cpufreq support for Marvell Armada XP
Date: Wed, 23 Jul 2014 13:19:30 +0200	[thread overview]
Message-ID: <20140723131930.46dcbc2e@free-electrons.com> (raw)
In-Reply-To: <1404920715-19834-1-git-send-email-thomas.petazzoni@free-electrons.com>

Viresh, Jason,

So, what do we do with this patch series, which depends on the
cpufreq-generic driver? Has there been any solution found for 3.17 ?

Jason, in any case, I'd like the following patches to be merged for
3.17, regardless of what happens with the cpufreq driver:

 ARM: mvebu: ensure CPU clocks are enabled
 ARM: mvebu: extend PMSU code to support dynamic frequency scaling
 clk: mvebu: extend clk-cpu for dynamic frequency scaling

One patch should be split:

 ARM: mvebu: update Armada XP DT for dynamic frequency scaling

 -> In this patch, the addition of clock-latency is related to the
    cpufreq generic DT binding, so I think we shouldn't merge that. But
    on the other hand, this patch also adds the new registers for the
    Armada XP CPU clock, which is used by "clk: mvebu: extend clk-cpu
    for dynamic frequency scaling".

The patch:

 ARM: mvebu: allow enabling of cpufreq on Armada XP

can be dropped, since ARCH_HAS_CPUFREQ has been removed.

The other patches are defconfig changes, which are meaningless without
the cpufreq-generic driver.

Jason, what do you think about me sending a new version of the patch
series, which will have two clearly separated set of patches:

 1/ A first set of patches that can be applied regardless of what
    happens on the cpufreq driver side. Getting it merged will not
    bring cpufreq support, but it will add the foundations needed to
    support it.

 2/ A second set of patches that use the cpufreq-generic driver, which
    might get applied of the cpufreq maintainers find a solution in
    time for 3.17. If not, then I'll re-adapt them for 3.18.

What do you think?

Thomas


On Wed,  9 Jul 2014 17:45:08 +0200, Thomas Petazzoni wrote:
> Mike, Viresh, Rafael, Jason, Gregory, Andrew, Sebastian,
> 
> Here is the third version of the patches adding cpufreq support for
> the Marvell Armada XP processor.
> 
> Changes since v2
> ================
> 
>  - As suggested by Stephen Boyd, instead of using a new clock notifier
>    that somewhat "hides" the dependency of the clk-cpu clock driver on
>    the PMSU, use a direct call from the clk-cpu driver to the PMSU
>    driver.
> 
>  - Add a comment that explains why the OPP are not removed on failure
>    in the PMSU code initializing the cpufreq logic, in answer to the
>    review from Ezequiel Garcia.
> 
> Changes since v1
> ================
> 
>  - Rework the patch series to use the generalized cpufreq-cpu0
>    (renamed cpufreq-generic) driver instead of having an Armada XP
>    specific cpufreq driver. This was suggested by Viresh
>    Kumar. Basically, it only involved adding a "clock-latency"
>    property in the DT, and changing the PMSU code to register the two
>    OPPs supported by each CPU, and registering the "cpufreq-generic"
>    platform device instead of the "armadaxp-cpufreq" one.
> 
> Jason, this patch series is based on 3.16-rc3, but it applies fine
> even with mvebu/fixes and mvebu/soc merged (which contain some PMSU
> changes), so I haven't based the patch series on those branches. To
> _work_, the code needs the new cpufreq-generic driver which is pending
> in Viresh Kumar's tree for 3.17, but there is no build dependency.
> 
> Thanks,
> 
> Thomas
> 
> Thomas Petazzoni (7):
>   ARM: mvebu: ensure CPU clocks are enabled
>   ARM: mvebu: extend PMSU code to support dynamic frequency scaling
>   clk: mvebu: extend clk-cpu for dynamic frequency scaling
>   ARM: mvebu: update Armada XP DT for dynamic frequency scaling
>   ARM: mvebu: allow enabling of cpufreq on Armada XP
>   ARM: mvebu: update mvebu_v7_defconfig with cpufreq support
>   ARM: configs: add cpufreq-generic in multi_v7_defconfig
> 
>  .../devicetree/bindings/clock/mvebu-cpu-clock.txt  |   5 +-
>  arch/arm/boot/dts/armada-xp-mv78230.dtsi           |   2 +
>  arch/arm/boot/dts/armada-xp-mv78260.dtsi           |   2 +
>  arch/arm/boot/dts/armada-xp-mv78460.dtsi           |   4 +
>  arch/arm/boot/dts/armada-xp.dtsi                   |   2 +-
>  arch/arm/configs/multi_v7_defconfig                |   1 +
>  arch/arm/configs/mvebu_v7_defconfig                |   2 +
>  arch/arm/mach-mvebu/Kconfig                        |   1 +
>  arch/arm/mach-mvebu/platsmp.c                      |   1 +
>  arch/arm/mach-mvebu/pmsu.c                         | 162 +++++++++++++++++++++
>  drivers/clk/mvebu/clk-cpu.c                        |  80 +++++++++-
>  include/linux/mvebu-pmsu.h                         |  20 +++
>  12 files changed, 274 insertions(+), 8 deletions(-)
>  create mode 100644 include/linux/mvebu-pmsu.h
> 



-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

  parent reply	other threads:[~2014-07-23 11:19 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-09 15:45 [PATCHv3 0/7] cpufreq support for Marvell Armada XP Thomas Petazzoni
2014-07-09 15:45 ` [PATCHv3 1/7] ARM: mvebu: ensure CPU clocks are enabled Thomas Petazzoni
2014-07-16 13:02   ` Jason Cooper
2014-07-09 15:45 ` [PATCHv3 2/7] ARM: mvebu: extend PMSU code to support dynamic frequency scaling Thomas Petazzoni
2014-07-23 23:50   ` Mike Turquette
2014-07-24  6:29     ` Thomas Petazzoni
2014-07-24 11:11       ` Jason Cooper
2014-07-09 15:45 ` [PATCHv3 3/7] clk: mvebu: extend clk-cpu for " Thomas Petazzoni
2014-07-09 15:45 ` [PATCHv3 4/7] ARM: mvebu: update Armada XP DT " Thomas Petazzoni
2014-07-16 12:55   ` Jason Cooper
2014-07-09 15:45 ` [PATCHv3 5/7] ARM: mvebu: allow enabling of cpufreq on Armada XP Thomas Petazzoni
2014-07-09 15:45 ` [PATCHv3 6/7] ARM: mvebu: update mvebu_v7_defconfig with cpufreq support Thomas Petazzoni
2014-07-16 12:52   ` Jason Cooper
2014-07-09 15:45 ` [PATCHv3 7/7] ARM: configs: add cpufreq-generic in multi_v7_defconfig Thomas Petazzoni
2014-07-16 12:49   ` Jason Cooper
2014-07-13 22:33 ` [PATCHv3 0/7] cpufreq support for Marvell Armada XP Jason Cooper
2014-07-23 11:19 ` Thomas Petazzoni [this message]
2014-07-23 11:39   ` Jason Cooper
2014-07-23 11:53     ` Thomas Petazzoni
2014-07-23 16:52   ` Viresh Kumar
2014-07-23 23:53 ` [PATCHv3 3/7] clk: mvebu: extend clk-cpu for dynamic frequency scaling Thomas Petazzoni
2014-07-24  6:33   ` Thomas Petazzoni
2014-07-24 17:52     ` Mike Turquette
2014-07-24 18:24       ` Thomas Petazzoni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140723131930.46dcbc2e@free-electrons.com \
    --to=thomas.petazzoni@free-electrons.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).