From mboxrd@z Thu Jan  1 00:00:00 1970
From: mark.rutland@arm.com (Mark Rutland)
Date: Wed, 30 Jul 2014 16:46:26 +0100
Subject: [PATCH 2/5] arm64, thunder: Add initial dts for Cavium Thunder SoC
In-Reply-To: <1406732794-20920-3-git-send-email-rric@kernel.org>
References: <1406732794-20920-1-git-send-email-rric@kernel.org>
 <1406732794-20920-3-git-send-email-rric@kernel.org>
Message-ID: <20140730154626.GD20162@leverpostej>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hi,

On Wed, Jul 30, 2014 at 04:06:31PM +0100, Robert Richter wrote:
> From: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
> 
> Add initial device tree nodes for Cavium Thunder SoCs with support of
> 48 cores and gicv3. The dts file requires further changes, esp. for
> pci, gicv3-its and smmu. This changes will be added later together
> with the device drivers.
> 
> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
> Signed-off-by: Robert Richter <rrichter@cavium.com>
> ---
>  arch/arm64/boot/dts/Makefile         |   1 +
>  arch/arm64/boot/dts/thunder-88xx.dts | 387 +++++++++++++++++++++++++++++++++++
>  2 files changed, 388 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/thunder-88xx.dts
> 
> diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
> index c52bdb051f66..f8001a62029c 100644
> --- a/arch/arm64/boot/dts/Makefile
> +++ b/arch/arm64/boot/dts/Makefile
> @@ -1,3 +1,4 @@
> +dtb-$(CONFIG_ARCH_THUNDER) += thunder-88xx.dtb
>  dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb foundation-v8.dtb
>  dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb
>  
> diff --git a/arch/arm64/boot/dts/thunder-88xx.dts b/arch/arm64/boot/dts/thunder-88xx.dts
> new file mode 100644
> index 000000000000..4cf20ac9138b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/thunder-88xx.dts
> @@ -0,0 +1,387 @@
> +/*
> + * Cavium Thunder DTS file
> + *
> + * Copyright (C) 2013, Cavium Inc.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + */
> +/dts-v1/;
> +
> +/* Reserving first 12MB of DDR for firmware */
> +/memreserve/ 0x00000000 0x00c00000;

What exactly is this memreserve intended to protect at runtime?

The only item of runtime firmware I see in use below is PSCI on the
secure side.

How is the kernel booted on this platform? UEFI?

> +/ {
> +	model = "Cavium ThunderX CN88XX Family";
> +	compatible = "cavium,thunder-88xx";

Please don't use wildcards in compatible strings. Give this an absolute
name, and override as necessary.

> +	interrupt-parent = <&gic0>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	aliases {
> +		serial0 = &uaa0;
> +		serial1 = &uaa1;
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-0.2";
> +		method = "smc";
> +	};

Nice!

> +
> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		cpu at 000 {
> +			device_type = "cpu";
> +			compatible = "cavium,thunder", "arm,armv8";
> +			reg = <0x0 0x000>;
> +			enable-method = "psci";
> +		};

Just to check: both the SoC and CPU are called thunder?

[...]

> +
> +	memory at 00000000 {
> +		device_type = "memory";
> +		reg = <0x0 0x00000000 0x0 0x80000000>;
> +	};
> +
> +	gic0: interrupt-controller at 801000000000 {

To make this easier to read, please place a comma between 32-bit
portions of the unit address (e.g. here have 8010,00000000).

> +		compatible = "arm,gic-v3";
> +		#interrupt-cells = <3>;
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;

This has no children, so why have ranges, #address-cells, and
#size-cells?

> +		interrupt-controller;
> +		reg = <0x8010 0x00000000 0x0 0x010000>, /* GICD */
> +		      <0x8010 0x80000000 0x0 0x200000>; /* GICR */
> +		interrupts = <1 9 0xf04>;
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <1 13 0xff01>,
> +		             <1 14 0xff01>,
> +		             <1 11 0xff01>,
> +		             <1 10 0xff01>;
> +	};
> +
> +	soc {
> +		compatible = "simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		clocks {
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +
> +			refclk50mhz: refclk50mhz {
> +				compatible = "fixed-clock";
> +				#clock-cells = <0>;
> +				clock-frequency = <50000000>;
> +				clock-output-names = "refclk50mhz";
> +			};
> +		};

Please get rid of the clocks node and just put the clocks here.

> +
> +		uaa0: serial at 87e024000000 {
> +			compatible = "arm,pl011", "arm,primecell";
> +			reg = <0x87e0 0x24000000 0x0 0x1000>;
> +			interrupts = <1 21 4>;
> +			clocks = <&refclk50mhz>;
> +			clock-names = "apb_pclk";

Is this actually the apb_pclk, or is the the uartclk? I assume it's the
latter.

> +		};
> +
> +		uaa1: serial at 87e025000000 {
> +			compatible = "arm,pl011", "arm,primecell";
> +			reg = <0x87e0 0x25000000 0x0 0x1000>;
> +			interrupts = <1 22 4>;
> +			clocks = <&refclk50mhz>;
> +			clock-names = "apb_pclk";

Similarly?

Thanks,
Mark.