linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: bigeasy@linutronix.de (Sebastian Andrzej Siewior)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 13/16] tty: serial: 8250_dma: add pm runtime
Date: Mon, 29 Sep 2014 11:56:45 +0200	[thread overview]
Message-ID: <20140929095645.GC13142@linutronix.de> (raw)
In-Reply-To: <20140929092606.GC13952@ci00147.xsens-tech.local>

* Frans Klaver | 2014-09-29 11:26:06 [+0200]:

>On Wed, Sep 10, 2014 at 09:30:08PM +0200, Sebastian Andrzej Siewior wrote:
>> There is nothing to do for RPM in the RX path. If the HW goes off then it
>> won't assert the DMA line and the transfer won't happen. So we hope that
>> the HW does not go off for RX to work (DMA or PIO makes no difference
>> here).
>> 
>> For TX the situation is slightly different. RPM is enabled on
>> start_tx(). We can't disable RPM on DMA complete callback because there
>> is still data in the FIFO which is being sent. We have to wait until
>> the FIFO is empty before we disable it.
>> For this to happen we fake a TX sent error and enable THRI. Once the
>> FIFO is empty we receive an interrupt and since the TTY-buffer is still
>> empty we "put RPM" via __stop_tx(). Should it been filed then in the
>> start_tx() path we should program the DMA transfer and remove the error
>> flag and the THRI bit.
>
>That last sentence starts out a bit messy.

This got mered so there is nothing I can do about it anymore. But I will
try to fix comments in code where and in patches that are not yet merged
(what you report :))

Sebastian

  reply	other threads:[~2014-09-29  9:56 UTC|newest]

Thread overview: 97+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-10 19:29 [PATCH 00/16 v9] omap 8250 based uart + DMA Sebastian Andrzej Siewior
2014-09-10 19:29 ` [PATCH 01/16] tty: serial: 8250_core: allow to set ->throttle / ->unthrottle callbacks Sebastian Andrzej Siewior
2014-09-10 19:29 ` [PATCH 02/16] tty: serial: 8250_core: add run time pm Sebastian Andrzej Siewior
2014-09-29  9:46   ` Frans Klaver
2014-09-29 13:39     ` Sebastian Andrzej Siewior
2014-09-10 19:29 ` [PATCH 03/16] tty: serial: 8250_core: read only RX if there is something in the FIFO Sebastian Andrzej Siewior
2015-02-09 13:34   ` Nicolas Schichan
2015-02-09 23:34     ` Peter Hurley
2015-02-10  9:32       ` Sebastian Andrzej Siewior
2015-02-10 12:04       ` Nicolas Schichan
2015-02-10 17:46         ` Peter Hurley
2015-02-11 20:01           ` Peter Hurley
2015-02-11 20:03             ` Tony Lindgren
2015-02-11 20:42               ` Peter Hurley
2015-02-12  8:45                 ` Sebastian Andrzej Siewior
2015-02-12  9:40                   ` Russell King - ARM Linux
2015-02-12 16:32                   ` Peter Hurley
2015-02-12 19:23                     ` Sebastian Andrzej Siewior
2015-02-12 19:55                       ` Peter Hurley
2015-02-12 20:34                         ` Sebastian Andrzej Siewior
2015-02-13 18:51                         ` Sebastian Andrzej Siewior
2015-02-13 23:15                           ` Russell King - ARM Linux
2015-02-15 17:32                             ` [PATCH] serial: 8250: Revert "tty: serial: 8250_core: read only RX if there is something in the FIFO" Sebastian Andrzej Siewior
2015-05-12 20:25                               ` Tony Lindgren
2014-09-10 19:29 ` [PATCH 04/16] tty: serial: 8250_core: use the ->line argument as a hint in serial8250_find_match_or_unused() Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 05/16] tty: serial: 8250_core: remove UART_IER_RDI in serial8250_stop_rx() Sebastian Andrzej Siewior
2014-09-11 11:19   ` Heikki Krogerus
2014-09-10 19:30 ` [PATCH 06/16] tty: serial: Add 8250-core based omap driver Sebastian Andrzej Siewior
2014-09-11 11:57   ` Peter Hurley
2014-09-16 17:01     ` Sebastian Andrzej Siewior
2014-09-29  9:38   ` Frans Klaver
2014-09-29 13:27     ` Sebastian Andrzej Siewior
2014-09-29 13:34       ` Frans Klaver
2014-09-10 19:30 ` [PATCH 07/16] tty: serial: 8250_dma: handle error on TX submit Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 08/16] tty: serial: 8250_dma: enqueue RX dma again on completion Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 09/16] tty: serial: 8250_dma: Add a TX trigger workaround for AM33xx Sebastian Andrzej Siewior
2014-09-11 11:17   ` Heikki Krogerus
2014-09-11 11:42     ` Sebastian Andrzej Siewior
2014-09-11 12:32       ` Peter Hurley
2014-09-11 12:50         ` Sebastian Andrzej Siewior
2014-09-11 14:35           ` Peter Hurley
2014-09-15 17:01             ` Sebastian Andrzej Siewior
2014-09-16 16:55               ` Sebastian Andrzej Siewior
2014-09-17 12:20                 ` Peter Hurley
2014-09-17 16:25                   ` Sebastian Andrzej Siewior
2014-09-29 16:15                   ` Sebastian Andrzej Siewior
2014-09-11 15:11           ` Frans Klaver
2014-09-11 16:04             ` Sebastian Andrzej Siewior
2014-09-11 17:04               ` Frans Klaver
2014-09-12  7:23                 ` Sebastian Andrzej Siewior
     [not found]                   ` <20140912094010.GE28458@ci00147.xsens-tech.local>
2014-09-12  9:51                     ` Sebastian Andrzej Siewior
2014-09-12 10:28                       ` Frans Klaver
2014-09-15 16:42                         ` Sebastian Andrzej Siewior
2014-09-16  9:05                           ` Frans Klaver
2014-09-16 12:42                             ` Frans Klaver
2014-09-16 14:23                               ` Frans Klaver
2014-09-17 10:28                           ` Frans Klaver
2014-09-21 20:41                             ` Sebastian Andrzej Siewior
2014-09-22  9:28                               ` Frans Klaver
2014-09-24  7:56                                 ` Sebastian Andrzej Siewior
2014-09-25 15:14                                 ` Sebastian Andrzej Siewior
2014-09-25 15:18                                   ` Frans Klaver
2014-09-29  8:50                                   ` Frans Klaver
2014-09-29  9:54                                     ` Sebastian Andrzej Siewior
2014-09-29 10:30                                       ` Frans Klaver
2014-09-30  8:44                                         ` Frans Klaver
2014-10-02 10:27                                           ` Sebastian Andrzej Siewior
2014-10-13 14:55                                             ` Frans Klaver
2014-09-23 17:03                               ` Peter Hurley
2014-09-24  7:53                                 ` Sebastian Andrzej Siewior
2014-09-25 10:42                                   ` Sebastian Andrzej Siewior
2014-09-25 11:31                                     ` Peter Hurley
2014-09-25 13:11                                       ` Sebastian Andrzej Siewior
2014-09-17 16:34       ` Sebastian Andrzej Siewior
2014-09-19 10:22         ` Heikki Krogerus
2014-09-19 10:58           ` Sebastian Andrzej Siewior
2014-09-19 11:25             ` Peter Hurley
2014-09-22  7:46             ` Heikki Krogerus
2014-09-25  9:24               ` Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 10/16] tty: serial: 8250_dma: optimize the xmit path due to UART_BUG_DMA_TX Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 11/16] tty: serial: 8250_dma: keep own book keeping about RX transfers Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 12/16] tty: serial: 8250_dma: handle the UART RDI event while DMA remains idle Sebastian Andrzej Siewior
2014-09-29  9:23   ` Frans Klaver
2014-09-10 19:30 ` [PATCH 13/16] tty: serial: 8250_dma: add pm runtime Sebastian Andrzej Siewior
2014-09-29  9:26   ` Frans Klaver
2014-09-29  9:56     ` Sebastian Andrzej Siewior [this message]
2014-09-10 19:30 ` [PATCH 14/16] arm: dts: am33xx: add DMA properties for UART Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 15/16] arm: dts: dra7: " Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 16/16] tty: serial: 8250: omap: add dma support Sebastian Andrzej Siewior
2014-09-12 22:43 ` [PATCH 00/16 v9] omap 8250 based uart + DMA Tony Lindgren
2014-09-15 11:50   ` Sebastian Andrzej Siewior
2014-09-16 12:57     ` Sebastian Andrzej Siewior
2014-09-16 16:48       ` Tony Lindgren
2014-09-16 21:30         ` Tony Lindgren
2014-09-17  8:38           ` Sebastian Andrzej Siewior
2014-09-17  9:05 ` Sebastian Andrzej Siewior
2014-09-26 16:02   ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140929095645.GC13142@linutronix.de \
    --to=bigeasy@linutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).