From mboxrd@z Thu Jan 1 00:00:00 1970 From: mpa@pengutronix.de (Markus Pargmann) Date: Tue, 7 Oct 2014 11:14:41 +0200 Subject: [PATCH 5/5] regulator: Remove unnecessary ena_gpio initializations In-Reply-To: <5433A9CD.8090007@samsung.com> References: <1412626635-7404-1-git-send-email-mpa@pengutronix.de> <1412626635-7404-6-git-send-email-mpa@pengutronix.de> <5433A9CD.8090007@samsung.com> Message-ID: <20141007091441.GE5042@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, Oct 07, 2014 at 10:52:29AM +0200, Krzysztof Koz?owski wrote: > On 06.10.2014 22:17, Markus Pargmann wrote: > >It is not necessary to setup config.ena_gpio with -EINVAL or similar. > >This patch removes these unnecessary initializations. > > > >Signed-off-by: Markus Pargmann > >--- > > drivers/regulator/pfuze100-regulator.c | 1 - > > drivers/regulator/s5m8767.c | 2 -- > > 2 files changed, 3 deletions(-) > > > >diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c > >index c879dff597ee..d7455ee309bf 100644 > >--- a/drivers/regulator/pfuze100-regulator.c > >+++ b/drivers/regulator/pfuze100-regulator.c > >@@ -509,7 +509,6 @@ static int pfuze100_regulator_probe(struct i2c_client *client, > > config.init_data = init_data; > > config.driver_data = pfuze_chip; > > config.of_node = match_of_node(i); > >- config.ena_gpio = -EINVAL; > > > > pfuze_chip->regulators[i] = > > devm_regulator_register(&client->dev, desc, &config); > >diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c > >index d258e6613831..2c7817f12516 100644 > >--- a/drivers/regulator/s5m8767.c > >+++ b/drivers/regulator/s5m8767.c > >@@ -949,8 +949,6 @@ static int s5m8767_pmic_probe(struct platform_device *pdev) > > config.driver_data = s5m8767; > > config.regmap = iodev->regmap_pmic; > > config.of_node = pdata->regulators[i].reg_node; > >- config.ena_gpio = -EINVAL; > >- config.ena_gpio_flags = 0; > > if (gpio_is_valid(pdata->regulators[i].ext_control_gpio)) > > s5m8767_regulator_config_ext_control(s5m8767, > > &pdata->regulators[i], &config); > > This would bring back problem with carried over ena_gpio (commit > f4fbb3ce342bc1 "regulator: s5m8767: Fix carried over ena_gpio > assignment"). > > The "config" is re-used in loop for next regulators. This means that > the "config.ena_gpio" has to be set here to prevent using the same > value for next regulator. > > I think these lines shouldn't be removed. Yes right, thanks. Best regards, Markus -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: