Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: bigeasy@linutronix.de (Sebastian Andrzej Siewior)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 03/16] tty: serial: 8250_core: read only RX if there is something in the FIFO
Date: Fri, 13 Feb 2015 19:51:16 +0100
Message-ID: <20150213185115.GF5482@linutronix.de> (raw)
In-Reply-To: <54DD053A.8060905@hurleysoftware.com>

Something like this maybe?

Subject: [PATCH] serial: 8250: skip empty RX-read only on OMAP

The conditional RX-FIFO read seems to cause spurious interrupts and we
see just:
|serial8250: too much work for irq29

The previous behaviour was "default" for decades and Marvell's 88f6282 SoC
might not be the only that relies on it. Therefore this patch moves this
special OMAP3630 behaviour befind a BUG field.

Fixes: 0aa525d11859 ("tty: serial: 8250_core: read only RX if there is
       something in the FIFO")

Reported-By: Nicolas Schichan <nschichan@freebox.fr>
Debuged-By: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 drivers/tty/serial/8250/8250.h      |  1 +
 drivers/tty/serial/8250/8250_core.c | 10 ++++++++--
 drivers/tty/serial/8250/8250_omap.c |  1 +
 3 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index b00836851061..b6899fd69c7e 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -84,6 +84,7 @@ struct serial8250_config {
 #define UART_BUG_NOMSR	(1 << 2)	/* UART has buggy MSR status bits (Au1x00) */
 #define UART_BUG_THRE	(1 << 3)	/* UART has buggy THRE reassertion */
 #define UART_BUG_PARITY	(1 << 4)	/* UART mishandles parity if FIFO enabled */
+#define UART_BUG_RXEMPT	(1 << 5)	/* UART can not read empty FIFO */
 
 #define PROBE_RSA	(1 << 0)
 #define PROBE_ANY	(~0)
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index e3b9570a1eff..185386178023 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -2137,8 +2137,13 @@ int serial8250_do_startup(struct uart_port *port)
 
 	/*
 	 * Clear the interrupt registers.
+	 *
+	 * This (and later) unsolicied read of the RX FIFO seems to clear the
+	 * RX timeout condition which otherwise generates spurious interrupt.
+	 * This behaviour has been observed on Marvell's 88f6282 SoC.
 	 */
-	if (serial_port_in(port, UART_LSR) & UART_LSR_DR)
+	if (!(up->bugs & UART_BUG_RXEMPT) ||
+	    (serial_port_in(port, UART_LSR) & UART_LSR_DR))
 		serial_port_in(port, UART_RX);
 	serial_port_in(port, UART_IIR);
 	serial_port_in(port, UART_MSR);
@@ -2300,7 +2305,8 @@ int serial8250_do_startup(struct uart_port *port)
 	 * saved flags to avoid getting false values from polling
 	 * routines or the previous session.
 	 */
-	if (serial_port_in(port, UART_LSR) & UART_LSR_DR)
+	if (!(up->bugs & UART_BUG_RXEMPT) ||
+	    (serial_port_in(port, UART_LSR) & UART_LSR_DR))
 		serial_port_in(port, UART_RX);
 	serial_port_in(port, UART_IIR);
 	serial_port_in(port, UART_MSR);
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index fe6d2e51da09..a7ead2fa6a32 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -1021,6 +1021,7 @@ static int omap8250_probe(struct platform_device *pdev)
 	up.port.fifosize = 64;
 	up.tx_loadsz = 64;
 	up.capabilities = UART_CAP_FIFO;
+	up.bugs = UART_BUG_RXEMPT;
 #ifdef CONFIG_PM
 	/*
 	 * Runtime PM is mostly transparent. However to do it right we need to a
-- 
2.1.4

  parent reply index

Thread overview: 97+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-10 19:29 [PATCH 00/16 v9] omap 8250 based uart + DMA Sebastian Andrzej Siewior
2014-09-10 19:29 ` [PATCH 01/16] tty: serial: 8250_core: allow to set ->throttle / ->unthrottle callbacks Sebastian Andrzej Siewior
2014-09-10 19:29 ` [PATCH 02/16] tty: serial: 8250_core: add run time pm Sebastian Andrzej Siewior
2014-09-29  9:46   ` Frans Klaver
2014-09-29 13:39     ` Sebastian Andrzej Siewior
2014-09-10 19:29 ` [PATCH 03/16] tty: serial: 8250_core: read only RX if there is something in the FIFO Sebastian Andrzej Siewior
2015-02-09 13:34   ` Nicolas Schichan
2015-02-09 23:34     ` Peter Hurley
2015-02-10  9:32       ` Sebastian Andrzej Siewior
2015-02-10 12:04       ` Nicolas Schichan
2015-02-10 17:46         ` Peter Hurley
2015-02-11 20:01           ` Peter Hurley
2015-02-11 20:03             ` Tony Lindgren
2015-02-11 20:42               ` Peter Hurley
2015-02-12  8:45                 ` Sebastian Andrzej Siewior
2015-02-12  9:40                   ` Russell King - ARM Linux
2015-02-12 16:32                   ` Peter Hurley
2015-02-12 19:23                     ` Sebastian Andrzej Siewior
2015-02-12 19:55                       ` Peter Hurley
2015-02-12 20:34                         ` Sebastian Andrzej Siewior
2015-02-13 18:51                         ` Sebastian Andrzej Siewior [this message]
2015-02-13 23:15                           ` Russell King - ARM Linux
2015-02-15 17:32                             ` [PATCH] serial: 8250: Revert "tty: serial: 8250_core: read only RX if there is something in the FIFO" Sebastian Andrzej Siewior
2015-05-12 20:25                               ` Tony Lindgren
2014-09-10 19:29 ` [PATCH 04/16] tty: serial: 8250_core: use the ->line argument as a hint in serial8250_find_match_or_unused() Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 05/16] tty: serial: 8250_core: remove UART_IER_RDI in serial8250_stop_rx() Sebastian Andrzej Siewior
2014-09-11 11:19   ` Heikki Krogerus
2014-09-10 19:30 ` [PATCH 06/16] tty: serial: Add 8250-core based omap driver Sebastian Andrzej Siewior
2014-09-11 11:57   ` Peter Hurley
2014-09-16 17:01     ` Sebastian Andrzej Siewior
2014-09-29  9:38   ` Frans Klaver
2014-09-29 13:27     ` Sebastian Andrzej Siewior
2014-09-29 13:34       ` Frans Klaver
2014-09-10 19:30 ` [PATCH 07/16] tty: serial: 8250_dma: handle error on TX submit Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 08/16] tty: serial: 8250_dma: enqueue RX dma again on completion Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 09/16] tty: serial: 8250_dma: Add a TX trigger workaround for AM33xx Sebastian Andrzej Siewior
2014-09-11 11:17   ` Heikki Krogerus
2014-09-11 11:42     ` Sebastian Andrzej Siewior
2014-09-11 12:32       ` Peter Hurley
2014-09-11 12:50         ` Sebastian Andrzej Siewior
2014-09-11 14:35           ` Peter Hurley
2014-09-15 17:01             ` Sebastian Andrzej Siewior
2014-09-16 16:55               ` Sebastian Andrzej Siewior
2014-09-17 12:20                 ` Peter Hurley
2014-09-17 16:25                   ` Sebastian Andrzej Siewior
2014-09-29 16:15                   ` Sebastian Andrzej Siewior
2014-09-11 15:11           ` Frans Klaver
2014-09-11 16:04             ` Sebastian Andrzej Siewior
2014-09-11 17:04               ` Frans Klaver
2014-09-12  7:23                 ` Sebastian Andrzej Siewior
     [not found]                   ` <20140912094010.GE28458@ci00147.xsens-tech.local>
2014-09-12  9:51                     ` Sebastian Andrzej Siewior
2014-09-12 10:28                       ` Frans Klaver
2014-09-15 16:42                         ` Sebastian Andrzej Siewior
2014-09-16  9:05                           ` Frans Klaver
2014-09-16 12:42                             ` Frans Klaver
2014-09-16 14:23                               ` Frans Klaver
2014-09-17 10:28                           ` Frans Klaver
2014-09-21 20:41                             ` Sebastian Andrzej Siewior
2014-09-22  9:28                               ` Frans Klaver
2014-09-24  7:56                                 ` Sebastian Andrzej Siewior
2014-09-25 15:14                                 ` Sebastian Andrzej Siewior
2014-09-25 15:18                                   ` Frans Klaver
2014-09-29  8:50                                   ` Frans Klaver
2014-09-29  9:54                                     ` Sebastian Andrzej Siewior
2014-09-29 10:30                                       ` Frans Klaver
2014-09-30  8:44                                         ` Frans Klaver
2014-10-02 10:27                                           ` Sebastian Andrzej Siewior
2014-10-13 14:55                                             ` Frans Klaver
2014-09-23 17:03                               ` Peter Hurley
2014-09-24  7:53                                 ` Sebastian Andrzej Siewior
2014-09-25 10:42                                   ` Sebastian Andrzej Siewior
2014-09-25 11:31                                     ` Peter Hurley
2014-09-25 13:11                                       ` Sebastian Andrzej Siewior
2014-09-17 16:34       ` Sebastian Andrzej Siewior
2014-09-19 10:22         ` Heikki Krogerus
2014-09-19 10:58           ` Sebastian Andrzej Siewior
2014-09-19 11:25             ` Peter Hurley
2014-09-22  7:46             ` Heikki Krogerus
2014-09-25  9:24               ` Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 10/16] tty: serial: 8250_dma: optimize the xmit path due to UART_BUG_DMA_TX Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 11/16] tty: serial: 8250_dma: keep own book keeping about RX transfers Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 12/16] tty: serial: 8250_dma: handle the UART RDI event while DMA remains idle Sebastian Andrzej Siewior
2014-09-29  9:23   ` Frans Klaver
2014-09-10 19:30 ` [PATCH 13/16] tty: serial: 8250_dma: add pm runtime Sebastian Andrzej Siewior
2014-09-29  9:26   ` Frans Klaver
2014-09-29  9:56     ` Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 14/16] arm: dts: am33xx: add DMA properties for UART Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 15/16] arm: dts: dra7: " Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 16/16] tty: serial: 8250: omap: add dma support Sebastian Andrzej Siewior
2014-09-12 22:43 ` [PATCH 00/16 v9] omap 8250 based uart + DMA Tony Lindgren
2014-09-15 11:50   ` Sebastian Andrzej Siewior
2014-09-16 12:57     ` Sebastian Andrzej Siewior
2014-09-16 16:48       ` Tony Lindgren
2014-09-16 21:30         ` Tony Lindgren
2014-09-17  8:38           ` Sebastian Andrzej Siewior
2014-09-17  9:05 ` Sebastian Andrzej Siewior
2014-09-26 16:02   ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150213185115.GF5482@linutronix.de \
    --to=bigeasy@linutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git