From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: dts: sun7i: Add dts file for Wexler TAB7200
Date: Thu, 5 Mar 2015 23:02:38 +0100 [thread overview]
Message-ID: <20150305220238.GC4522@lukather> (raw)
In-Reply-To: <1425503808-28567-1-git-send-email-mamlinav@gmail.com>
On Thu, Mar 05, 2015 at 12:16:48AM +0300, Aleksei Mamlin wrote:
> This patch add support for Wexler TAB7200 tablet.
>
> The Wexler TAB7200 is a A20 based tablet with 7 inch display(800x480),
> capacitive touchscreen(5 fingers), 1G RAM, 4G NAND, micro SD card slot,
> mini HDMI port, 3.5mm audio plug, 1 USB OTG port and 1 USB 2.0 port.
>
> Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
> ---
> arch/arm/boot/dts/Makefile | 3 +-
> arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 181 +++++++++++++++++++++++++
> 2 files changed, 183 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index beac15f..f6dc2ac 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -550,7 +550,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \
> sun7i-a20-olinuxino-lime2.dtb \
> sun7i-a20-olinuxino-micro.dtb \
> sun7i-a20-pcduino3.dtb \
> - sun7i-a20-pcduino3-nano.dtb
> + sun7i-a20-pcduino3-nano.dtb \
> + sun7i-a20-wexler-tab7200.dtb
> dtb-$(CONFIG_MACH_SUN8I) += \
> sun8i-a23-ippo-q8h-v5.dtb \
> sun8i-a23-ippo-q8h-v1.2.dtb
> diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
> new file mode 100644
> index 0000000..b197d57
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
> @@ -0,0 +1,181 @@
> +/*
> + * Copyright 2015 Aleksei Mamlin
> + * Aleksei Mamlin <mamlinav@gmail.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public
> + * License along with this file; if not, write to the Free
> + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
> + * MA 02110-1301 USA
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "sun7i-a20.dtsi"
> +#include "sunxi-common-regulators.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/pinctrl/sun4i-a10.h>
You don't seem to be using the pinctrl header.
Also, next time, please mention the version and provide a changelog
for your patches.
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150305/cca5621a/attachment.sig>
next prev parent reply other threads:[~2015-03-05 22:02 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-04 8:15 [PATCH] ARM: dts: sun7i: Add dts file for Wexler TAB7200 Aleksei Mamlin
2015-03-04 20:18 ` Maxime Ripard
2015-03-04 20:26 ` Aleksei Mamlin
2015-03-04 20:39 ` Maxime Ripard
2015-03-04 21:16 ` [PATCH 1/2] " Aleksei Mamlin
2015-03-05 22:02 ` Maxime Ripard [this message]
2015-03-04 21:17 ` [PATCH 2/2] dt-bindings: Add vendor-prefix for Wexler Aleksei Mamlin
2015-03-05 22:03 ` Maxime Ripard
2015-03-08 11:57 ` [PATCH v2 1/2] ARM: dts: sun7i: Add dts file for Wexler TAB7200 Aleksei Mamlin
2015-03-09 10:13 ` Maxime Ripard
2015-03-08 11:58 ` [PATCH v2 2/2] dt-bindings: Add vendor-prefix for Wexler Aleksei Mamlin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150305220238.GC4522@lukather \
--to=maxime.ripard@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).