From mboxrd@z Thu Jan 1 00:00:00 1970 From: mgr@pengutronix.de (Michael Grzeschik) Date: Mon, 23 Mar 2015 16:19:37 +0100 Subject: [PATCH v2 1/2] ARM: dts: imx6: factor out pinmux for edm1 module In-Reply-To: <1425831960-10259-1-git-send-email-m.grzeschik@pengutronix.de> References: <1425831960-10259-1-git-send-email-m.grzeschik@pengutronix.de> Message-ID: <20150323151937.GA20161@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sun, Mar 08, 2015 at 05:25:59PM +0100, Michael Grzeschik wrote: > Thw Wandboard is using the EDM1-CF-IMX6 module which is > defined under the edm standard. > > http://www.edm-standard.org/ > > As this module is used on more boards this patch moves the default > pinmux settings into the special file imx6qdl-edm1.dtsi. > > Signed-off-by: Michael Grzeschik > --- > - fixed the alphabetical order of the nodes > - moved MX6QDL_PAD_GPIO_16__ENET_REF_CLK to the board hogpins > > arch/arm/boot/dts/imx6qdl-edm1.dtsi | 230 +++++++++++++++++++++++++ > arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi | 1 + > arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi | 1 + > arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 99 +---------- > 4 files changed, 234 insertions(+), 97 deletions(-) > create mode 100644 arch/arm/boot/dts/imx6qdl-edm1.dtsi subliminal ping... -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |