From mboxrd@z Thu Jan 1 00:00:00 1970 From: mgr@pengutronix.de (Michael Grzeschik) Date: Wed, 25 Mar 2015 16:46:05 +0100 Subject: [PATCH v2 1/2] ARM: dts: imx6: factor out pinmux for edm1 module In-Reply-To: <20150324121810.GI28410@dragon> References: <1425831960-10259-1-git-send-email-m.grzeschik@pengutronix.de> <20150323151937.GA20161@pengutronix.de> <20150324121810.GI28410@dragon> Message-ID: <20150325154605.GG20161@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, Mar 24, 2015 at 08:18:11PM +0800, Shawn Guo wrote: > On Mon, Mar 23, 2015 at 04:19:37PM +0100, Michael Grzeschik wrote: > > On Sun, Mar 08, 2015 at 05:25:59PM +0100, Michael Grzeschik wrote: > > > Thw Wandboard is using the EDM1-CF-IMX6 module which is > > > defined under the edm standard. > > > > > > http://www.edm-standard.org/ > > > > > > As this module is used on more boards this patch moves the default > > > pinmux settings into the special file imx6qdl-edm1.dtsi. > > > > > > Signed-off-by: Michael Grzeschik > > > --- > > > - fixed the alphabetical order of the nodes > > > - moved MX6QDL_PAD_GPIO_16__ENET_REF_CLK to the board hogpins > > > > > > arch/arm/boot/dts/imx6qdl-edm1.dtsi | 230 +++++++++++++++++++++++++ > > > arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi | 1 + > > > arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi | 1 + > > > arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 99 +---------- > > > 4 files changed, 234 insertions(+), 97 deletions(-) > > > create mode 100644 arch/arm/boot/dts/imx6qdl-edm1.dtsi > > > > subliminal ping... > > Have we got anyone test the patch on Wandboard as requested by rsc [1]? So far, not yet. :/ Could anyone test? Thanks, Michael -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |