linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: k.kozlowski@samsung.com (Krzysztof Kozlowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/7] bindings: spi-samsung: document the clocks and the clock-name property
Date: Fri, 8 Jul 2016 22:32:07 +0200	[thread overview]
Message-ID: <20160708203207.GB25980@kozik-lap> (raw)
In-Reply-To: <1467989201-14661-3-git-send-email-andi.shyti@samsung.com>

On Fri, Jul 08, 2016 at 11:46:36PM +0900, Andi Shyti wrote:
> These two properties were not documented but used in the spi
> dts. Add the related documentation.
> 
> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
> ---
>  Documentation/devicetree/bindings/spi/spi-samsung.txt | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt
> index 57d5539..2b7167e 100644
> --- a/Documentation/devicetree/bindings/spi/spi-samsung.txt
> +++ b/Documentation/devicetree/bindings/spi/spi-samsung.txt
> @@ -24,6 +24,14 @@ Required SoC Specific Properties:
>  - dma-names: Names for the dma channels. There must be at least one channel
>    named "tx" for transmit and named "rx" for receive.
>  
> +- clocks: specifies the clock IDs provided to the SPI controller; they are
> +  required for interacting with the controller itself, for synchronizing the bus
> +  and as I/O clock (the latter is required by exynos5433 and exynos7).
> +
> +- clock-names: string names of the clocks in the 'clocks' property; the names
> +  mut be "spi", "spi_busclkN" and "spi_ioclk", where N is determined by

s/mut/must/

> +  "samsung,spi-src-clk".

Thanks for taking care of this! Older SoCs (like s3c-s5p) even though
they do not set clk_from_cmu, it seems they required them as well...
this is a little bit strange but at least now the documentation matches
the driver.

I would only describe the difference in number of clocks in more
specific way, e.g.:

 - clock-names: string names of the clocks in the 'clocks' property; for all
   devices the names must be "spi", "spi_busclkN" (where N is determined by
   "samsung,spi-src-clk"); for Exynos5433 it must contain third clock
   named "spi_ioclk"

... or something similar.

Anyway in general:

Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof

  reply	other threads:[~2016-07-08 20:32 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-08 14:46 [PATCH v2 0/7] spi s3c64xx ioclk handling Andi Shyti
2016-07-08 14:46 ` [PATCH v2 1/7] bindings: spi-samsung: add exynos5433 spi compatible Andi Shyti
2016-07-08 20:23   ` Krzysztof Kozlowski
2016-07-11 10:49   ` Sylwester Nawrocki
2016-07-14 16:33   ` Applied "spi: s3c64xx: add exynos5433 spi compatible" to the spi tree Mark Brown
2016-07-08 14:46 ` [PATCH v2 2/7] bindings: spi-samsung: document the clocks and the clock-name property Andi Shyti
2016-07-08 20:32   ` Krzysztof Kozlowski [this message]
2016-07-11  2:36     ` [PATCH v3] " Andi Shyti
2016-07-14 16:32       ` Applied "spi: s3c64xx: document the clocks and the clock-name property" to the spi tree Mark Brown
2016-07-08 14:46 ` [PATCH v2 3/7] spi: s3c64xx: rename goto labels to meaningful names Andi Shyti
2016-07-14 16:32   ` Applied "spi: s3c64xx: rename goto labels to meaningful names" to the spi tree Mark Brown
2016-07-08 14:46 ` [PATCH v2 4/7] spi: s3c64xx: use error code from clk_prepare_enable() Andi Shyti
2016-07-08 20:33   ` Krzysztof Kozlowski
2016-07-14 16:32   ` Applied "spi: s3c64xx: use error code from clk_prepare_enable()" to the spi tree Mark Brown
2016-07-08 14:46 ` [PATCH v2 5/7] spi: s3c64xx: add exynos5433 compatible for ioclk handling Andi Shyti
2016-07-08 16:13   ` Michael Turquette
2016-07-08 16:31     ` Andi Shyti
2016-07-08 20:39   ` Krzysztof Kozlowski
2016-07-14 16:32   ` Applied "spi: s3c64xx: add Exynos5433 compatible for ioclk handling" to the spi tree Mark Brown
2016-07-08 14:46 ` [PATCH v2 6/7] spi: s3c64xx: restore removed comments Andi Shyti
2016-07-08 16:17   ` Michael Turquette
2016-07-08 16:35     ` Andi Shyti
2016-07-11 10:33     ` Sylwester Nawrocki
2016-07-11 22:17       ` Michael Turquette
2016-07-12 12:16         ` Sylwester Nawrocki
2016-07-12  6:54       ` [PATCH v3 " Andi Shyti
2016-07-12  8:22         ` Mark Brown
2016-07-12  8:25           ` Andi Shyti
2016-07-12  9:00             ` Mark Brown
2016-07-12 18:07         ` Michael Turquette
2016-07-14 16:32         ` Applied "spi: s3c64xx: restore removed comments" to the spi tree Mark Brown
2016-07-08 20:35   ` [PATCH v2 6/7] spi: s3c64xx: restore removed comments Krzysztof Kozlowski
2016-07-08 14:46 ` [PATCH v2 7/7] clk: exynos5433: remove CLK_IGNORE_UNUSED flag from SPI clocks Andi Shyti
2016-07-11 10:58   ` Sylwester Nawrocki
2016-07-08 16:21 ` [PATCH v2 0/7] spi s3c64xx ioclk handling Michael Turquette

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160708203207.GB25980@kozik-lap \
    --to=k.kozlowski@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).