linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/4] ARM: dts: sun8i: Extend Orange Pi PC dt to also handle the PC Plus
Date: Wed, 13 Jul 2016 10:45:05 +0200	[thread overview]
Message-ID: <20160713084505.GE4761@lukather> (raw)
In-Reply-To: <1468095718-18515-1-git-send-email-hdegoede@redhat.com>

On Sat, Jul 09, 2016 at 10:21:55PM +0200, Hans de Goede wrote:
> There is a new Orange Pi PC Plus available now, rather then adding
> yet another dts file for this variant, extend the existing
> Orange Pi PC to support the sdio wifi and emmc found on this variant.
> 
> Downside of this approach is the following messages in dmesg when run
> on the non Plus Orange Pi PC:
> 
> sunxi-mmc 1c10000.mmc: fatal err update clk timeout
> sunxi-mmc 1c11000.mmc: smc 2 err, cmd 8, RTO !!
> sunxi-mmc 1c11000.mmc: smc 2 err, cmd 55, RTO !!
> sunxi-mmc 1c11000.mmc: smc 2 err, cmd 55, RTO !!
> sunxi-mmc 1c11000.mmc: smc 2 err, cmd 55, RTO !!
> sunxi-mmc 1c11000.mmc: smc 2 err, cmd 55, RTO !!
> sunxi-mmc 1c11000.mmc: smc 2 err, cmd 1, RTO !!
> 
> Note these are completely harmless and there is no adverse effect
> to the functioning of the non Plus Orange Pi PC.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
>  arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 40 +++++++++++++++++++++++++++++-
>  1 file changed, 39 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
> index b8340f7..f9bf260 100644
> --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
> @@ -49,11 +49,13 @@
>  #include <dt-bindings/pinctrl/sun4i-a10.h>
>  
>  / {
> -	model = "Xunlong Orange Pi PC";
> +	model = "Xunlong Orange Pi PC / PC Plus";
>  	compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3";
>  
>  	aliases {
>  		serial0 = &uart0;
> +		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
> +		ethernet1 = &rtl8189ftv;
>  	};
>  
>  	chosen {
> @@ -118,6 +120,42 @@
>  	status = "okay";
>  };
>  
> +/* Note only present on orangepi pc *plus* */
> +&mmc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc1_pins_a>;
> +	vmmc-supply = <&reg_vcc3v3>;
> +	bus-width = <4>;
> +	non-removable;
> +	status = "okay";
> +
> +	/*
> +	 * Explicitly define the sdio device, so that we can add an ethernet
> +	 * alias for it (which e.g. makes u-boot set a mac-address).
> +	 */
> +	rtl8189ftv: sdio_wifi at 1 {
> +		reg = <1>;
> +	};
> +};

Nothing prevents you from including the orange pi pc dts, from the
orange pi plus dts.

It prevents the duplication you were trying to avoid, and it doesn't
create all those spurious errors and devices.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160713/eb497b96/attachment.sig>

  parent reply	other threads:[~2016-07-13  8:45 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-09 20:21 [PATCH 1/4] ARM: dts: sun8i: Extend Orange Pi PC dt to also handle the PC Plus Hans de Goede
2016-07-09 20:21 ` [PATCH 2/4] ARM: dts: sun8i: Extend Orange Pi Plus dt to also handle the Plus 2E Hans de Goede
2016-07-09 20:21 ` [PATCH 3/4] ARM: dts: sun8i: Add ethernet1 alias to Orange Pi 2 dts Hans de Goede
2016-07-28 18:20   ` Maxime Ripard
2016-07-09 20:21 ` [PATCH 4/4] ARM: dts: sun8i: Add dts file for the Orange Pi Lite SBC Hans de Goede
2016-07-28 18:21   ` Maxime Ripard
2016-07-13  8:45 ` Maxime Ripard [this message]
2016-07-13 10:01   ` [PATCH 1/4] ARM: dts: sun8i: Extend Orange Pi PC dt to also handle the PC Plus Hans de Goede
2016-07-25  6:40     ` Maxime Ripard
2016-07-26 21:00       ` Hans de Goede
2016-07-26 21:07       ` Hans de Goede
2016-07-28 18:17         ` Maxime Ripard
2016-07-28 20:36           ` Hans de Goede
2016-08-07 14:25             ` Hans de Goede
2016-08-26 18:45               ` Hans de Goede
2016-08-31 16:28               ` Maxime Ripard
2016-09-03 11:05                 ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160713084505.GE4761@lukather \
    --to=maxime.ripard@free-electrons.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).