From mboxrd@z Thu Jan 1 00:00:00 1970 From: moinejf@free.fr (Jean-Francois Moine) Date: Fri, 22 Jul 2016 21:00:06 +0200 Subject: [PATCH 3/3] mmc: sunxi: Add support to the Allwinner A83T In-Reply-To: <20160721111851.133a3f16d6e9de1ee45b3654@free.fr> References: <0ddc5f7d9a42515f901c95b8c0c1f5a5e4d575e9.1469082481.git.moinejf@free.fr> <20160721085838.GH5993@lukather> <20160721111851.133a3f16d6e9de1ee45b3654@free.fr> Message-ID: <20160722210006.2d08c8261f84c59f7e2ddd34@free.fr> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thu, 21 Jul 2016 11:18:51 +0200 Jean-Francois Moine wrote: > > On Wed, Jul 20, 2016 at 08:28:47PM +0200, Jean-Francois Moine wrote: > > > The rate of the PLL-PERIPH clock is usually set to 1.2GHz in the A83T. > > > > Uh? The datasheet says to set it to 600MHz. > > Right. But the driver of the SDK for the Banana Pi M3 (A83T) sets it > to 1.2GHz. I tested again, and, with the pll-periph at 600MHz, both the SDcard and the eMMC are working fine. So, you may forget about this patch, sorry for the noise. -- Ken ar c'henta? | ** Breizh ha Linux atav! ** Jef | http://moinejf.free.fr/