From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Mon, 8 Aug 2016 12:56:21 +0100 Subject: [PATCH v5 2/7] mfd: ac100: Add driver for X-Powers AC100 audio codec / RTC combo IC In-Reply-To: <1467988422-17934-3-git-send-email-wens@csie.org> References: <1467988422-17934-1-git-send-email-wens@csie.org> <1467988422-17934-3-git-send-email-wens@csie.org> Message-ID: <20160808115620.GM5243@dell> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, 08 Jul 2016, Chen-Yu Tsai wrote: > The AC100 is a multifunction device with an audio codec subsystem and > an RTC subsystem. These two subsystems share a common register space > and host interface. > > Signed-off-by: Chen-Yu Tsai > Acked-by: Lee Jones > --- > Changes since v4: > > - None. > > Changes since v3: > > - Changed register name prefix to CLKOUT_ for clock output controls > > Changes since v2: > > - Dropped file name > - Added copyright line. > - Changed MODULE_LICENSE to GPL v2, matching the header > - Added Lee's ack > > --- > drivers/mfd/Kconfig | 10 +++ > drivers/mfd/Makefile | 2 + > drivers/mfd/ac100.c | 137 +++++++++++++++++++++++++++++++++++ > include/linux/mfd/ac100.h | 178 ++++++++++++++++++++++++++++++++++++++++++++++ > 4 files changed, 327 insertions(+) > create mode 100644 drivers/mfd/ac100.c > create mode 100644 include/linux/mfd/ac100.h Applied, thanks. > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index 00ec1290b639..c2ceb303c856 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -112,6 +112,16 @@ config MFD_BCM590XX > help > Support for the BCM590xx PMUs from Broadcom > > +config MFD_AC100 > + tristate "X-Powers AC100" > + select MFD_CORE > + depends on SUNXI_RSB > + help > + If you say Y here you get support for the X-Powers AC100 audio codec > + IC. > + This driver include only the core APIs. You have to select individual > + components like codecs or RTC under the corresponding menus. > + > config MFD_AXP20X > tristate > select MFD_CORE > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile > index 2ba3ba35f745..bca83dbb5ed8 100644 > --- a/drivers/mfd/Makefile > +++ b/drivers/mfd/Makefile > @@ -113,6 +113,8 @@ obj-$(CONFIG_PMIC_DA9052) += da9052-irq.o > obj-$(CONFIG_PMIC_DA9052) += da9052-core.o > obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o > obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o > + > +obj-$(CONFIG_MFD_AC100) += ac100.o > obj-$(CONFIG_MFD_AXP20X) += axp20x.o > obj-$(CONFIG_MFD_AXP20X_I2C) += axp20x-i2c.o > obj-$(CONFIG_MFD_AXP20X_RSB) += axp20x-rsb.o > diff --git a/drivers/mfd/ac100.c b/drivers/mfd/ac100.c > new file mode 100644 > index 000000000000..9bc69cd7807d > --- /dev/null > +++ b/drivers/mfd/ac100.c > @@ -0,0 +1,137 @@ > +/* > + * MFD core driver for X-Powers' AC100 Audio Codec IC > + * > + * The AC100 is a highly integrated audio codec and RTC subsystem designed > + * for mobile applications. It has 3 I2S/PCM interfaces, a 2 channel DAC, > + * a 2 channel ADC with 5 inputs and a builtin mixer. The RTC subsystem has > + * 3 clock outputs. > + * > + * The audio codec and RTC parts are completely separate, sharing only the > + * host interface for access to its registers. > + * > + * Copyright (2016) Chen-Yu Tsai > + * > + * Author: Chen-Yu Tsai > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +static const struct regmap_range ac100_writeable_ranges[] = { > + regmap_reg_range(AC100_CHIP_AUDIO_RST, AC100_I2S_SR_CTRL), > + regmap_reg_range(AC100_I2S1_CLK_CTRL, AC100_I2S1_MXR_GAIN), > + regmap_reg_range(AC100_I2S2_CLK_CTRL, AC100_I2S2_MXR_GAIN), > + regmap_reg_range(AC100_I2S3_CLK_CTRL, AC100_I2S3_SIG_PATH_CTRL), > + regmap_reg_range(AC100_ADC_DIG_CTRL, AC100_ADC_VOL_CTRL), > + regmap_reg_range(AC100_HMIC_CTRL1, AC100_HMIC_STATUS), > + regmap_reg_range(AC100_DAC_DIG_CTRL, AC100_DAC_MXR_GAIN), > + regmap_reg_range(AC100_ADC_APC_CTRL, AC100_LINEOUT_CTRL), > + regmap_reg_range(AC100_ADC_DAP_L_CTRL, AC100_ADC_DAP_OPT), > + regmap_reg_range(AC100_DAC_DAP_CTRL, AC100_DAC_DAP_OPT), > + regmap_reg_range(AC100_ADC_DAP_ENA, AC100_DAC_DAP_ENA), > + regmap_reg_range(AC100_SRC1_CTRL1, AC100_SRC1_CTRL2), > + regmap_reg_range(AC100_SRC2_CTRL1, AC100_SRC2_CTRL2), > + regmap_reg_range(AC100_CLK32K_ANALOG_CTRL, AC100_CLKOUT_CTRL3), > + regmap_reg_range(AC100_RTC_RST, AC100_RTC_UPD), > + regmap_reg_range(AC100_ALM_INT_ENA, AC100_ALM_INT_STA), > + regmap_reg_range(AC100_ALM_SEC, AC100_RTC_GP(15)), > +}; > + > +static const struct regmap_range ac100_volatile_ranges[] = { > + regmap_reg_range(AC100_CHIP_AUDIO_RST, AC100_PLL_CTRL2), > + regmap_reg_range(AC100_HMIC_STATUS, AC100_HMIC_STATUS), > + regmap_reg_range(AC100_ADC_DAP_L_STA, AC100_ADC_DAP_L_STA), > + regmap_reg_range(AC100_SRC1_CTRL1, AC100_SRC1_CTRL1), > + regmap_reg_range(AC100_SRC1_CTRL3, AC100_SRC2_CTRL1), > + regmap_reg_range(AC100_SRC2_CTRL3, AC100_SRC2_CTRL4), > + regmap_reg_range(AC100_RTC_RST, AC100_RTC_RST), > + regmap_reg_range(AC100_RTC_SEC, AC100_ALM_INT_STA), > + regmap_reg_range(AC100_ALM_SEC, AC100_ALM_UPD), > +}; > + > +static const struct regmap_access_table ac100_writeable_table = { > + .yes_ranges = ac100_writeable_ranges, > + .n_yes_ranges = ARRAY_SIZE(ac100_writeable_ranges), > +}; > + > +static const struct regmap_access_table ac100_volatile_table = { > + .yes_ranges = ac100_volatile_ranges, > + .n_yes_ranges = ARRAY_SIZE(ac100_volatile_ranges), > +}; > + > +static const struct regmap_config ac100_regmap_config = { > + .reg_bits = 8, > + .val_bits = 16, > + .wr_table = &ac100_writeable_table, > + .volatile_table = &ac100_volatile_table, > + .max_register = AC100_RTC_GP(15), > + .cache_type = REGCACHE_RBTREE, > +}; > + > +static struct mfd_cell ac100_cells[] = { > + { > + .name = "ac100-codec", > + .of_compatible = "x-powers,ac100-codec", > + }, { > + .name = "ac100-rtc", > + .of_compatible = "x-powers,ac100-rtc", > + }, > +}; > + > +static int ac100_rsb_probe(struct sunxi_rsb_device *rdev) > +{ > + struct ac100_dev *ac100; > + int ret; > + > + ac100 = devm_kzalloc(&rdev->dev, sizeof(*ac100), GFP_KERNEL); > + if (!ac100) > + return -ENOMEM; > + > + ac100->dev = &rdev->dev; > + sunxi_rsb_device_set_drvdata(rdev, ac100); > + > + ac100->regmap = devm_regmap_init_sunxi_rsb(rdev, &ac100_regmap_config); > + if (IS_ERR(ac100->regmap)) { > + ret = PTR_ERR(ac100->regmap); > + dev_err(ac100->dev, "regmap init failed: %d\n", ret); > + return ret; > + } > + > + ret = devm_mfd_add_devices(ac100->dev, PLATFORM_DEVID_NONE, ac100_cells, > + ARRAY_SIZE(ac100_cells), NULL, 0, NULL); > + if (ret) { > + dev_err(ac100->dev, "failed to add MFD devices: %d\n", ret); > + return ret; > + } > + > + return 0; > +} > + > +static const struct of_device_id ac100_of_match[] = { > + { .compatible = "x-powers,ac100" }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, ac100_of_match); > + > +static struct sunxi_rsb_driver ac100_rsb_driver = { > + .driver = { > + .name = "ac100", > + .of_match_table = of_match_ptr(ac100_of_match), > + }, > + .probe = ac100_rsb_probe, > +}; > +module_sunxi_rsb_driver(ac100_rsb_driver); > + > +MODULE_DESCRIPTION("Audio codec MFD core driver for AC100"); > +MODULE_AUTHOR("Chen-Yu Tsai "); > +MODULE_LICENSE("GPL v2"); > diff --git a/include/linux/mfd/ac100.h b/include/linux/mfd/ac100.h > new file mode 100644 > index 000000000000..3c148f196b9f > --- /dev/null > +++ b/include/linux/mfd/ac100.h > @@ -0,0 +1,178 @@ > +/* > + * Functions and registers to access AC100 codec / RTC combo IC. > + * > + * Copyright (C) 2016 Chen-Yu Tsai > + * > + * Chen-Yu Tsai > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#ifndef __LINUX_MFD_AC100_H > +#define __LINUX_MFD_AC100_H > + > +#include > + > +struct ac100_dev { > + struct device *dev; > + struct regmap *regmap; > +}; > + > +/* Audio codec related registers */ > +#define AC100_CHIP_AUDIO_RST 0x00 > +#define AC100_PLL_CTRL1 0x01 > +#define AC100_PLL_CTRL2 0x02 > +#define AC100_SYSCLK_CTRL 0x03 > +#define AC100_MOD_CLK_ENA 0x04 > +#define AC100_MOD_RST_CTRL 0x05 > +#define AC100_I2S_SR_CTRL 0x06 > + > +/* I2S1 interface */ > +#define AC100_I2S1_CLK_CTRL 0x10 > +#define AC100_I2S1_SND_OUT_CTRL 0x11 > +#define AC100_I2S1_SND_IN_CTRL 0x12 > +#define AC100_I2S1_MXR_SRC 0x13 > +#define AC100_I2S1_VOL_CTRL1 0x14 > +#define AC100_I2S1_VOL_CTRL2 0x15 > +#define AC100_I2S1_VOL_CTRL3 0x16 > +#define AC100_I2S1_VOL_CTRL4 0x17 > +#define AC100_I2S1_MXR_GAIN 0x18 > + > +/* I2S2 interface */ > +#define AC100_I2S2_CLK_CTRL 0x20 > +#define AC100_I2S2_SND_OUT_CTRL 0x21 > +#define AC100_I2S2_SND_IN_CTRL 0x22 > +#define AC100_I2S2_MXR_SRC 0x23 > +#define AC100_I2S2_VOL_CTRL1 0x24 > +#define AC100_I2S2_VOL_CTRL2 0x25 > +#define AC100_I2S2_VOL_CTRL3 0x26 > +#define AC100_I2S2_VOL_CTRL4 0x27 > +#define AC100_I2S2_MXR_GAIN 0x28 > + > +/* I2S3 interface */ > +#define AC100_I2S3_CLK_CTRL 0x30 > +#define AC100_I2S3_SND_OUT_CTRL 0x31 > +#define AC100_I2S3_SND_IN_CTRL 0x32 > +#define AC100_I2S3_SIG_PATH_CTRL 0x33 > + > +/* ADC digital controls */ > +#define AC100_ADC_DIG_CTRL 0x40 > +#define AC100_ADC_VOL_CTRL 0x41 > + > +/* HMIC plug sensing / key detection */ > +#define AC100_HMIC_CTRL1 0x44 > +#define AC100_HMIC_CTRL2 0x45 > +#define AC100_HMIC_STATUS 0x46 > + > +/* DAC digital controls */ > +#define AC100_DAC_DIG_CTRL 0x48 > +#define AC100_DAC_VOL_CTRL 0x49 > +#define AC100_DAC_MXR_SRC 0x4c > +#define AC100_DAC_MXR_GAIN 0x4d > + > +/* Analog controls */ > +#define AC100_ADC_APC_CTRL 0x50 > +#define AC100_ADC_SRC 0x51 > +#define AC100_ADC_SRC_BST_CTRL 0x52 > +#define AC100_OUT_MXR_DAC_A_CTRL 0x53 > +#define AC100_OUT_MXR_SRC 0x54 > +#define AC100_OUT_MXR_SRC_BST 0x55 > +#define AC100_HPOUT_CTRL 0x56 > +#define AC100_ERPOUT_CTRL 0x57 > +#define AC100_SPKOUT_CTRL 0x58 > +#define AC100_LINEOUT_CTRL 0x59 > + > +/* ADC digital audio processing (high pass filter & auto gain control */ > +#define AC100_ADC_DAP_L_STA 0x80 > +#define AC100_ADC_DAP_R_STA 0x81 > +#define AC100_ADC_DAP_L_CTRL 0x82 > +#define AC100_ADC_DAP_R_CTRL 0x83 > +#define AC100_ADC_DAP_L_T_L 0x84 /* Left Target Level */ > +#define AC100_ADC_DAP_R_T_L 0x85 /* Right Target Level */ > +#define AC100_ADC_DAP_L_H_A_C 0x86 /* Left High Avg. Coef */ > +#define AC100_ADC_DAP_L_L_A_C 0x87 /* Left Low Avg. Coef */ > +#define AC100_ADC_DAP_R_H_A_C 0x88 /* Right High Avg. Coef */ > +#define AC100_ADC_DAP_R_L_A_C 0x89 /* Right Low Avg. Coef */ > +#define AC100_ADC_DAP_L_D_T 0x8a /* Left Decay Time */ > +#define AC100_ADC_DAP_L_A_T 0x8b /* Left Attack Time */ > +#define AC100_ADC_DAP_R_D_T 0x8c /* Right Decay Time */ > +#define AC100_ADC_DAP_R_A_T 0x8d /* Right Attack Time */ > +#define AC100_ADC_DAP_N_TH 0x8e /* Noise Threshold */ > +#define AC100_ADC_DAP_L_H_N_A_C 0x8f /* Left High Noise Avg. Coef */ > +#define AC100_ADC_DAP_L_L_N_A_C 0x90 /* Left Low Noise Avg. Coef */ > +#define AC100_ADC_DAP_R_H_N_A_C 0x91 /* Right High Noise Avg. Coef */ > +#define AC100_ADC_DAP_R_L_N_A_C 0x92 /* Right Low Noise Avg. Coef */ > +#define AC100_ADC_DAP_H_HPF_C 0x93 /* High High-Pass-Filter Coef */ > +#define AC100_ADC_DAP_L_HPF_C 0x94 /* Low High-Pass-Filter Coef */ > +#define AC100_ADC_DAP_OPT 0x95 /* AGC Optimum */ > + > +/* DAC digital audio processing (high pass filter & dynamic range control) */ > +#define AC100_DAC_DAP_CTRL 0xa0 > +#define AC100_DAC_DAP_H_HPF_C 0xa1 /* High High-Pass-Filter Coef */ > +#define AC100_DAC_DAP_L_HPF_C 0xa2 /* Low High-Pass-Filter Coef */ > +#define AC100_DAC_DAP_L_H_E_A_C 0xa3 /* Left High Energy Avg Coef */ > +#define AC100_DAC_DAP_L_L_E_A_C 0xa4 /* Left Low Energy Avg Coef */ > +#define AC100_DAC_DAP_R_H_E_A_C 0xa5 /* Right High Energy Avg Coef */ > +#define AC100_DAC_DAP_R_L_E_A_C 0xa6 /* Right Low Energy Avg Coef */ > +#define AC100_DAC_DAP_H_G_D_T_C 0xa7 /* High Gain Delay Time Coef */ > +#define AC100_DAC_DAP_L_G_D_T_C 0xa8 /* Low Gain Delay Time Coef */ > +#define AC100_DAC_DAP_H_G_A_T_C 0xa9 /* High Gain Attack Time Coef */ > +#define AC100_DAC_DAP_L_G_A_T_C 0xaa /* Low Gain Attack Time Coef */ > +#define AC100_DAC_DAP_H_E_TH 0xab /* High Energy Threshold */ > +#define AC100_DAC_DAP_L_E_TH 0xac /* Low Energy Threshold */ > +#define AC100_DAC_DAP_H_G_K 0xad /* High Gain K parameter */ > +#define AC100_DAC_DAP_L_G_K 0xae /* Low Gain K parameter */ > +#define AC100_DAC_DAP_H_G_OFF 0xaf /* High Gain offset */ > +#define AC100_DAC_DAP_L_G_OFF 0xb0 /* Low Gain offset */ > +#define AC100_DAC_DAP_OPT 0xb1 /* DRC optimum */ > + > +/* Digital audio processing enable */ > +#define AC100_ADC_DAP_ENA 0xb4 > +#define AC100_DAC_DAP_ENA 0xb5 > + > +/* SRC control */ > +#define AC100_SRC1_CTRL1 0xb8 > +#define AC100_SRC1_CTRL2 0xb9 > +#define AC100_SRC1_CTRL3 0xba > +#define AC100_SRC1_CTRL4 0xbb > +#define AC100_SRC2_CTRL1 0xbc > +#define AC100_SRC2_CTRL2 0xbd > +#define AC100_SRC2_CTRL3 0xbe > +#define AC100_SRC2_CTRL4 0xbf > + > +/* RTC clk control */ > +#define AC100_CLK32K_ANALOG_CTRL 0xc0 > +#define AC100_CLKOUT_CTRL1 0xc1 > +#define AC100_CLKOUT_CTRL2 0xc2 > +#define AC100_CLKOUT_CTRL3 0xc3 > + > +/* RTC module */ > +#define AC100_RTC_RST 0xc6 > +#define AC100_RTC_CTRL 0xc7 > +#define AC100_RTC_SEC 0xc8 /* second */ > +#define AC100_RTC_MIN 0xc9 /* minute */ > +#define AC100_RTC_HOU 0xca /* hour */ > +#define AC100_RTC_WEE 0xcb /* weekday */ > +#define AC100_RTC_DAY 0xcc /* day */ > +#define AC100_RTC_MON 0xcd /* month */ > +#define AC100_RTC_YEA 0xce /* year */ > +#define AC100_RTC_UPD 0xcf /* update trigger */ > + > +/* RTC alarm */ > +#define AC100_ALM_INT_ENA 0xd0 > +#define AC100_ALM_INT_STA 0xd1 > +#define AC100_ALM_SEC 0xd8 > +#define AC100_ALM_MIN 0xd9 > +#define AC100_ALM_HOU 0xda > +#define AC100_ALM_WEE 0xdb > +#define AC100_ALM_DAY 0xdc > +#define AC100_ALM_MON 0xdd > +#define AC100_ALM_YEA 0xde > +#define AC100_ALM_UPD 0xdf > + > +/* RTC general purpose register 0 ~ 15 */ > +#define AC100_RTC_GP(x) (0xe0 + (x)) > + > +#endif /* __LINUX_MFD_AC100_H */ -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog