linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: krzk@kernel.org (Krzysztof Kozlowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 6/7] arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board
Date: Fri, 26 Aug 2016 18:32:36 +0200	[thread overview]
Message-ID: <20160826163236.GC15511@kozik-book> (raw)
In-Reply-To: <1472046551-703-7-git-send-email-cw00.choi@samsung.com>

On Wed, Aug 24, 2016 at 10:49:10PM +0900, Chanwoo Choi wrote:
> This patch adds the Device Tree source for Exynos5433-based Samsung TM2 board.
> This board fully support the all things for mobile target.
> 
> This patch supports the following devices:
> 1. basic SoC
> - Initial booting for Samsung Exynos5433 SoC
> - DRAM LPDDR3 (3GB)
> - eMMC (32GB)
> - ARM architecture timer
> 
> 2. power management devices
> - Sasmung S2MPS13 PMIC for the power supply
> - CPUFREQ for big.LITTLE cores
> - TMU for big.LITTLE cores and GPU
> - ADC with thermistor to measure the temperature of AP/Battery/Charger
> - Maxim MAX77843 Interface PMIC (MUIC/Haptic/Regulator)
> 
> 3. sound devices
> - I2S for sound bus
> - LPASS for sound power control
> - Wolfson WM5110 for sound codec
> - Maxim MAX98504 for speaker amplifier
> - TM2 ASoC Machine device driver node
> 
> 3. display devices
> - DECON, DSI and MIC for the panel output
> 
> 4. usb devices
> - USB 3.0 DRD (Dual Role Device)
> - USB 3.0 Host controller
> 
> 5. storage devices
> - MSHC (Mobile Storae Host Controller) for eMMC device

Not fixed. Mobile Storage.

Everything else looks fine, so fix above only if you are going to resend
everything. If there won't be resend, I can fix it when applying.

For the record:
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

Best regards,
Krzysztof

  parent reply	other threads:[~2016-08-26 16:32 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-24 13:49 [PATCH v2 0/7] arm64: dts: Add the dts file for Exynos5433 and TM/TM2E board Chanwoo Choi
2016-08-24 13:49 ` [PATCH v2 1/7] clocksource: exynos_mct: Add the support for ARM64 Chanwoo Choi
2016-08-26 16:02   ` Krzysztof Kozlowski
2016-09-08 11:04   ` Daniel Lezcano
     [not found]     ` <CGME20160916111052eucas1p1fb19531ab7b3e53f6fdeb4fa0e8a5449@eucas1p1.samsung.com>
2016-09-16 11:10       ` Krzysztof Kozlowski
2016-08-24 13:49 ` [PATCH v2 2/7] Documentation: bindings: Add Exynos5433 PMU compatible Chanwoo Choi
2016-08-24 13:49 ` [PATCH v2 3/7] pinctrl: samsung: Add the support the multiple IORESOURCE_MEM for one pin-bank Chanwoo Choi
2016-08-25 14:30   ` Tomasz Figa
2016-08-25 14:41     ` Tomasz Figa
2016-09-05  8:08       ` Chanwoo Choi
2016-09-20  1:03         ` Tomasz Figa
2016-08-24 13:49 ` [PATCH v2 4/7] pinctrl: samsung: Add GPF support for Exynos5433 Chanwoo Choi
2016-08-25 14:34   ` Tomasz Figa
2016-08-24 13:49 ` [PATCH v2 5/7] arm64: dts: exynos: Add dts files for Samsung Exynos5433 64bit SoC Chanwoo Choi
2016-08-26 16:14   ` Krzysztof Kozlowski
2016-09-02  9:54     ` Chanwoo Choi
2016-08-26 17:49   ` Javier Martinez Canillas
2016-09-02 10:59     ` Chanwoo Choi
2016-09-07  7:55       ` Javier Martinez Canillas
2016-10-04 13:37   ` Geert Uytterhoeven
2016-10-04 13:46     ` Krzysztof Kozlowski
2016-08-24 13:49 ` [PATCH v2 6/7] arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board Chanwoo Choi
2016-08-25  9:28   ` kbuild test robot
2016-08-26 16:32   ` Krzysztof Kozlowski [this message]
2016-08-26 17:11     ` Krzysztof Kozlowski
2016-08-26 20:46     ` Chanwoo Choi
2016-08-26 18:30   ` Javier Martinez Canillas
2016-08-26 18:35     ` Javier Martinez Canillas
2016-09-02 11:29     ` Chanwoo Choi
2016-09-07  8:08       ` Javier Martinez Canillas
2016-08-30 17:11   ` Rob Herring
2016-08-31  1:24     ` Chanwoo Choi
2016-08-24 13:49 ` [PATCH v2 7/7] arm64: dts: exynos: Add dts file for Exynos5433-based TM2E board Chanwoo Choi
2016-08-26 18:32   ` Javier Martinez Canillas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160826163236.GC15511@kozik-book \
    --to=krzk@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).