From mboxrd@z Thu Jan 1 00:00:00 1970 From: linux@armlinux.org.uk (Russell King - ARM Linux) Date: Sun, 4 Sep 2016 21:18:30 +0100 Subject: [PATCH 05/33] gpio: add generic single-register fixed-direction GPIO driver In-Reply-To: <878tv7jxk4.fsf@belgarion.home> References: <20160829102328.GA28796@n2100.armlinux.org.uk> <87eg57e54l.fsf@belgarion.home> <20160830091805.GL1041@n2100.armlinux.org.uk> <87k2eycip0.fsf@belgarion.home> <20160830184612.GO1041@n2100.armlinux.org.uk> <87fupmc59b.fsf@belgarion.home> <20160831084938.GQ1041@n2100.armlinux.org.uk> <20160903102549.GK1041@n2100.armlinux.org.uk> <878tv7jxk4.fsf@belgarion.home> Message-ID: <20160904201830.GM1041@n2100.armlinux.org.uk> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sun, Sep 04, 2016 at 09:04:59PM +0200, Robert Jarzmik wrote: > And retested with my 3 patches on top of it. Everything works fine : > - CF insertion is correctly detected now ! > - AT/2 keyboard interrupts fire, keys are there, etc ... > - the AT/2 warning is now gone > > The pxa_cplds_irqs patch will make it work as before, better than today for > sure. I think edge type interrupts (such as sa1111), if they come close enough, > might be lost with the current implementation, but anyway, that's for another > time. Good news, but I suspect CF probably isn't working as it should do (see my reply to the clock alias patch.) > There is one patch in my serie that I left up to you, as I wasn't very sure > about the accuracy of my commit message, nor been able to write down all the > requirements implied on sa1111 with this additional test. That's basically what I have here at the moment, but since I made the suggestion, I've been thinking about moving it into the IRQ initialisation instead. Also, I think it's a genirq problem that you can install a chained handler on an interrupt without a registered chip - and then when an irq chip comes along later, the IRQ isn't unmasked. We should either not allow a chained handler to be installed in that situation, /or/ we should unmask chained IRQs when the chip comes along later. -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net.