From mboxrd@z Thu Jan 1 00:00:00 1970 From: zajec5@gmail.com (=?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?=) Date: Thu, 23 Mar 2017 23:30:44 +0100 Subject: [PATCH V2 1/2] dt-bindings: thermal: add support for Broadcom's Northstar thermal In-Reply-To: <20170318155632.18099-1-zajec5@gmail.com> References: <20170318155632.18099-1-zajec5@gmail.com> Message-ID: <20170323223045.15786-1-zajec5@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Rafa? Mi?ecki This commit documents binding for thermal used in Northstar family SoCs. Signed-off-by: Rafa? Mi?ecki --- .../devicetree/bindings/thermal/brcm,ns-thermal | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/brcm,ns-thermal diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal new file mode 100644 index 000000000000..9a22dd76ec01 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal @@ -0,0 +1,17 @@ +* Broadcom Northstar Thermal + +This binding describes thermal sensor that is part of Northstar's DMU (Device +Management Unit). + +Required properties: +- compatible : Must be "brcm,ns-thermal" +- reg : iomem address range of PVTMON registers +- #thermal-sensor-cells : Should be <0> + +Example: + +thermal { + compatible = "brcm,ns-thermal"; + reg = <0x1800c2c0 0x10>; + #thermal-sensor-cells = <0>; +}; -- 2.11.0