[PATCH v3 0/4] tty/serial: meson_uart: add support for core clock handling

[PATCH v3 0/4] tty/serial: meson_uart: add support for core clock handling

[Helmut Klein]

To be able to use the three none AO uarts of the meson gx SoCs (uart_A,
uart_B & uart_C), the core clock has to be enabled (see chapter 22.3 of
the public s905 data sheet).
At least the u-boot of my s905 based media player (netxeon minimx-g)
doesn't do this. so the driver must enable the clock.

This patch set does:
- exposes the UART clock ids to the dtb
- adds documentation for the dt-bindings of meson_uart
- adds the core clock handling to the driver
- adds the core clock handling to meson-gxbb.dtsi and meson-gxl.dtsi

The patchset is based on the branch "master" of the repository in [1]

Changes since v2
- mail subjects reworked
- add clocks/clock-names to the documentation
- add core clock handling to meson-gxbb.dtsi & meson-gxl.dtsi

Changes since v1
- use git to produce the patch set
- added the clock ids for uart_B and uart_C

[1] git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git

Helmut Klein (4):
  clk: meson: gxbb: expose CLKID_UARTx
  dt-bindings: meson_uart: add documentation for meson UARTs
  tty/serial: meson_uart: add the core clock handling to the driver
  ARM64: dts: meson-gx: add core clock support for uart_A, uart_B and
    uart_C

 .../bindings/serial/amlogic,meson_uart.txt         | 30 ++++++++++++++++++++++
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi        | 15 +++++++++++
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi         | 15 +++++++++++
 drivers/clk/meson/gxbb.h                           |  6 ++---
 drivers/tty/serial/meson_uart.c                    | 10 ++++++++
 include/dt-bindings/clock/gxbb-clkc.h              |  3 +++
 6 files changed, 76 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt

--
2.11.0

[PATCH v3 1/4] dt-bindings: clock: gxbb: expose UART clocks

[Helmut Klein]

Expose the clock ids of the three none AO uarts to the dt-bindings

Signed-off-by: Helmut Klein <hgkr.klein@gmail.com>
---
 drivers/clk/meson/gxbb.h              | 6 +++---
 include/dt-bindings/clock/gxbb-clkc.h | 3 +++
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h
index 8ee2022ce5d5..1edfaa5fe307 100644
--- a/drivers/clk/meson/gxbb.h
+++ b/drivers/clk/meson/gxbb.h
@@ -194,7 +194,7 @@
 /* #define CLKID_SAR_ADC */
 #define CLKID_SMART_CARD	  24
 #define CLKID_RNG0		  25
-#define CLKID_UART0		  26
+/* CLKID_UART0 */
 #define CLKID_SDHC		  27
 #define CLKID_STREAM		  28
 #define CLKID_ASYNC_FIFO	  29
@@ -216,7 +216,7 @@
 #define CLKID_ADC		  45
 #define CLKID_BLKMV		  46
 #define CLKID_AIU		  47
-#define CLKID_UART1		  48
+/* CLKID_UART1 */
 #define CLKID_G2D		  49
 /* CLKID_USB0 */
 /* CLKID_USB1 */
@@ -236,7 +236,7 @@
 /* CLKID_USB0_DDR_BRIDGE */
 #define CLKID_MMC_PCLK		  66
 #define CLKID_DVIN		  67
-#define CLKID_UART2		  68
+/* CLKID_UART2 */
 /* #define CLKID_SANA */
 #define CLKID_VPU_INTR		  70
 #define CLKID_SEC_AHB_AHB3_BRIDGE 71
diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h
index 692846c7941b..7b329df47752 100644
--- a/include/dt-bindings/clock/gxbb-clkc.h
+++ b/include/dt-bindings/clock/gxbb-clkc.h
@@ -15,13 +15,16 @@
 #define CLKID_SPI		34
 #define CLKID_I2C		22
 #define CLKID_SAR_ADC		23
+#define CLKID_UART0		26
 #define CLKID_ETH		36
+#define CLKID_UART1		48
 #define CLKID_USB0		50
 #define CLKID_USB1		51
 #define CLKID_USB		55
 #define CLKID_HDMI_PCLK		63
 #define CLKID_USB1_DDR_BRIDGE	64
 #define CLKID_USB0_DDR_BRIDGE	65
+#define CLKID_UART2		68
 #define CLKID_SANA		69
 #define CLKID_GCLK_VENCI_INT0	77
 #define CLKID_AO_I2C		93
--
2.11.0

[PATCH v3 2/4] dt-binding: meson_uart: add documentation for the UARTs of amlogic

[Helmut Klein]

Add the documentation for the device tree binding of meson_uart

Signed-off-by: Helmut Klein <hgkr.klein@gmail.com>
---
 .../bindings/serial/amlogic,meson_uart.txt         | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt

diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt b/Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt
new file mode 100644
index 000000000000..8250a191c2fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt
@@ -0,0 +1,30 @@
+* Amlogic Meson UART, used in multiple SoCs (e.g. S905, s905X, ...)
+
+Required properties:
+- compatible	: "amlogic,meson-uart"
+- reg		: offset and length of the register set for the device.
+- interrupts	: device interrupt
+- clocks	: a list of phandle + clock-specifier pairs, one for each
+		    entry in clock names.
+- clocks-names	: contains:
+   * "xtal" for the baud rate clock
+   * "core" for the core clock of none AO UARTs (optional)
+
+e.g.
+uart_A: serial at 84c0 {
+	compatible = "amlogic,meson-uart";
+	reg = <0x0 0x84c0 0x0 0x14>;
+	pinctrl-0 = <&uart_a_pins &uart_a_cts_rts_pins>;
+	interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+	clocks = <&xtal>, <&clkc CLKID_UART0>;
+	clock-names = "xtal", "core";
+	status = "ok";
+};
+
+Note: Each port should have an alias correctly numbered in "aliases" node.
+
+e.g.
+aliases {
+	serial0 = &uart_AO;
+	serial1 = &uart_A;
+};
--
2.11.0

[PATCH v3 3/4] tty/serial: meson_uart: add the core clock handling to the driver

[Helmut Klein]

This patch gets the core clock as provided by the DT and enables it.
The code was taken from Amlogic's serial driver, and was tested on my
board.

Signed-off-by: Helmut Klein <hgkr.klein@gmail.com>
---
 drivers/tty/serial/meson_uart.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index 60f16795d16b..cb99112288eb 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -600,6 +600,7 @@ static int meson_uart_probe(struct platform_device *pdev)
 	struct resource *res_mem, *res_irq;
 	struct uart_port *port;
 	struct clk *clk;
+	struct clk *core_clk;
 	int ret = 0;

 	if (pdev->dev.of_node)
@@ -625,6 +626,15 @@ static int meson_uart_probe(struct platform_device *pdev)
 	if (!port)
 		return -ENOMEM;

+	core_clk = devm_clk_get(&pdev->dev, "core");
+	if (!IS_ERR(core_clk)) {
+		ret = clk_prepare_enable(core_clk);
+		if (ret) {
+			dev_err(&pdev->dev, "couldn't enable clkc\n");
+			return ret;
+		}
+	}
+
 	clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(clk))
 		return PTR_ERR(clk);
--
2.11.0

[PATCH v3 4/4] ARM64: dts: meson-gx: add core clock support for uart_A, uart_B and uart_C

[Helmut Klein]

This patch adds the core clock support for the three none AO UARTs
of the meson gxbb & meson gxl SoCs

Signed-off-by: Helmut Klein <hgkr.klein@gmail.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 15 +++++++++++++++
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi  | 15 +++++++++++++++
 2 files changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 04b3324bc132..aa2f75d5cd37 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -524,3 +524,18 @@
 &vpu {
 	compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
 };
+
+&uart_A {
+	clocks = <&xtal>, <&clkc CLKID_UART0>;
+	clock-names = "xtal", "core";
+};
+
+&uart_B {
+	clocks = <&xtal>, <&clkc CLKID_UART1>;
+	clock-names = "xtal", "core";
+};
+
+&uart_C {
+	clocks = <&xtal>, <&clkc CLKID_UART2>;
+	clock-names = "xtal", "core";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index fe11b5fc61f7..f3cc18fd624a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -381,3 +381,18 @@
 &vpu {
 	compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
 };
+
+&uart_A {
+	clocks = <&xtal>, <&clkc CLKID_UART0>;
+	clock-names = "xtal", "core";
+};
+
+&uart_B {
+	clocks = <&xtal>, <&clkc CLKID_UART1>;
+	clock-names = "xtal", "core";
+};
+
+&uart_C {
+	clocks = <&xtal>, <&clkc CLKID_UART2>;
+	clock-names = "xtal", "core";
+};
--
2.11.0

[PATCH v3 3/4] tty/serial: meson_uart: add the core clock handling to the driver

[Jerome Brunet]

On Fri, 2017-03-31 at 18:54 +0200, Helmut Klein wrote:
> This patch gets the core clock as provided by the DT and enables it.
> The code was taken from Amlogic's serial driver, and was tested on my
> board.
> 
> Signed-off-by: Helmut Klein <hgkr.klein@gmail.com>
> ---
> ?drivers/tty/serial/meson_uart.c | 10 ++++++++++
> ?1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
> index 60f16795d16b..cb99112288eb 100644
> --- a/drivers/tty/serial/meson_uart.c
> +++ b/drivers/tty/serial/meson_uart.c
> @@ -600,6 +600,7 @@ static int meson_uart_probe(struct platform_device *pdev)
> ?	struct resource *res_mem, *res_irq;
> ?	struct uart_port *port;
> ?	struct clk *clk;
> +	struct clk *core_clk;
> ?	int ret = 0;
> 
> ?	if (pdev->dev.of_node)
> @@ -625,6 +626,15 @@ static int meson_uart_probe(struct platform_device *pdev)
> ?	if (!port)
> ?		return -ENOMEM;
> 
> +	core_clk = devm_clk_get(&pdev->dev, "core");
> +	if (!IS_ERR(core_clk)) {
> +		ret = clk_prepare_enable(core_clk);

This needs to be balanced with a clk_disable_unprepare() in remove.

You could try play with devm_add_action_or_reset, maybe like this:

devm_add_action_or_reset(dev,
			(void(*)(void *))clk_disable_unprepare,
			core_clk);

Sorry I did not notice it on the v2.


> +		if (ret) {
> +			dev_err(&pdev->dev, "couldn't enable clkc\n");
> +			return ret;
> +		}
> +	}
> +
> ?	clk = clk_get(&pdev->dev, NULL);

I still think you should name this one. Otherwise, what the non AO UART will get
here will depends on the order it was declared in DT.

To answer your question from the v2, yes I think it is ok to add clock-names to
the AO-UART. You are doing it for non AO ones so, why not ?


> ?	if (IS_ERR(clk))
> ?		return PTR_ERR(clk);
> --
> 2.11.0
> 

[PATCH v3 3/4] tty/serial: meson_uart: add the core clock handling to the driver

[Kevin Hilman]

On Mon, Apr 3, 2017 at 7:57 AM, Jerome Brunet <jbrunet@baylibre.com> wrote:
> On Fri, 2017-03-31 at 18:54 +0200, Helmut Klein wrote:
>> This patch gets the core clock as provided by the DT and enables it.
>> The code was taken from Amlogic's serial driver, and was tested on my
>> board.
>>
>> Signed-off-by: Helmut Klein <hgkr.klein@gmail.com>
>> ---
>>  drivers/tty/serial/meson_uart.c | 10 ++++++++++
>>  1 file changed, 10 insertions(+)
>>
>> diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
>> index 60f16795d16b..cb99112288eb 100644
>> --- a/drivers/tty/serial/meson_uart.c
>> +++ b/drivers/tty/serial/meson_uart.c
>> @@ -600,6 +600,7 @@ static int meson_uart_probe(struct platform_device *pdev)
>>       struct resource *res_mem, *res_irq;
>>       struct uart_port *port;
>>       struct clk *clk;
>> +     struct clk *core_clk;
>>       int ret = 0;
>>
>>       if (pdev->dev.of_node)
>> @@ -625,6 +626,15 @@ static int meson_uart_probe(struct platform_device *pdev)
>>       if (!port)
>>               return -ENOMEM;
>>
>> +     core_clk = devm_clk_get(&pdev->dev, "core");
>> +     if (!IS_ERR(core_clk)) {
>> +             ret = clk_prepare_enable(core_clk);
>
> This needs to be balanced with a clk_disable_unprepare() in remove.
>
> You could try play with devm_add_action_or_reset, maybe like this:
>
> devm_add_action_or_reset(dev,
>                         (void(*)(void *))clk_disable_unprepare,
>                         core_clk);
>
> Sorry I did not notice it on the v2.
>
>
>> +             if (ret) {
>> +                     dev_err(&pdev->dev, "couldn't enable clkc\n");
>> +                     return ret;
>> +             }
>> +     }
>> +
>>       clk = clk_get(&pdev->dev, NULL);
>
> I still think you should name this one. Otherwise, what the non AO UART will get
> here will depends on the order it was declared in DT.

Unfortunately, it has to be even a little more complicated.

This driver will need to work with current DT (no clock-names) as well
as newer DT using clock-names for "core" and "xtal".  So, you'll have
to first try for "xtal" here, and if it fails, then try NULL.

> To answer your question from the v2, yes I think it is ok to add clock-names to
> the AO-UART. You are doing it for non AO ones so, why not ?

Agreed.   And another good reason the driver needs to handle with and
without clock-names.

Kevin

[PATCH v3 0/4] tty/serial: meson_uart: add support for core clock handling

[Kevin Hilman]

Helmut Klein <hgkr.klein@gmail.com> writes:

> To be able to use the three none AO uarts of the meson gx SoCs (uart_A,

s/none/non/

> uart_B & uart_C), the core clock has to be enabled (see chapter 22.3 of
> the public s905 data sheet).
> At least the u-boot of my s905 based media player (netxeon minimx-g)
> doesn't do this. so the driver must enable the clock.

FYI: even if a booloader enablesq clocks, it's important that the kernel
enable clocks that it uses so the kernel can be independent of any
bootloader.

> This patch set does:
> - exposes the UART clock ids to the dtb
> - adds documentation for the dt-bindings of meson_uart
> - adds the core clock handling to the driver
> - adds the core clock handling to meson-gxbb.dtsi and meson-gxl.dtsi
>
> The patchset is based on the branch "master" of the repository in [1]

The master branch in my tree just tracks mainline master branch.

To avoid conflicts with other on-going DT changes, the DT patches should
probably be based on top of my v4.12/dt64 branch.

Kevin

[PATCH v3 2/4] dt-binding: meson_uart: add documentation for the UARTs of amlogic

[Rob Herring]

On Fri, Mar 31, 2017 at 06:54:35PM +0200, Helmut Klein wrote:
> Add the documentation for the device tree binding of meson_uart
> 
> Signed-off-by: Helmut Klein <hgkr.klein@gmail.com>
> ---
>  .../bindings/serial/amlogic,meson_uart.txt         | 30 ++++++++++++++++++++++
>  1 file changed, 30 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt
> 
> diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt b/Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt
> new file mode 100644
> index 000000000000..8250a191c2fc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt
> @@ -0,0 +1,30 @@
> +* Amlogic Meson UART, used in multiple SoCs (e.g. S905, s905X, ...)
> +
> +Required properties:
> +- compatible	: "amlogic,meson-uart"

Should have SoC specific compatible strings in addition.

> +- reg		: offset and length of the register set for the device.
> +- interrupts	: device interrupt
> +- clocks	: a list of phandle + clock-specifier pairs, one for each
> +		    entry in clock names.
> +- clocks-names	: contains:
> +   * "xtal" for the baud rate clock
> +   * "core" for the core clock of none AO UARTs (optional)
> +
> +e.g.
> +uart_A: serial at 84c0 {
> +	compatible = "amlogic,meson-uart";
> +	reg = <0x0 0x84c0 0x0 0x14>;
> +	pinctrl-0 = <&uart_a_pins &uart_a_cts_rts_pins>;
> +	interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
> +	clocks = <&xtal>, <&clkc CLKID_UART0>;
> +	clock-names = "xtal", "core";
> +	status = "ok";

Drop status from examples.

> +};
> +
> +Note: Each port should have an alias correctly numbered in "aliases" node.

True for pretty much any uart, so you can drop this.

> +
> +e.g.
> +aliases {
> +	serial0 = &uart_AO;
> +	serial1 = &uart_A;
> +};
> --
> 2.11.0
> 

[PATCH v3 1/4] dt-bindings: clock: gxbb: expose UART clocks

[Michael Turquette]

Quoting Helmut Klein (2017-03-31 18:54:34)
> Expose the clock ids of the three none AO uarts to the dt-bindings
> 
> Signed-off-by: Helmut Klein <hgkr.klein@gmail.com>

Acked-by: Michael Turquette <mturquette@baylibre.com>

> ---
>  drivers/clk/meson/gxbb.h              | 6 +++---
>  include/dt-bindings/clock/gxbb-clkc.h | 3 +++
>  2 files changed, 6 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h
> index 8ee2022ce5d5..1edfaa5fe307 100644
> --- a/drivers/clk/meson/gxbb.h
> +++ b/drivers/clk/meson/gxbb.h
> @@ -194,7 +194,7 @@
>  /* #define CLKID_SAR_ADC */
>  #define CLKID_SMART_CARD         24
>  #define CLKID_RNG0               25
> -#define CLKID_UART0              26
> +/* CLKID_UART0 */
>  #define CLKID_SDHC               27
>  #define CLKID_STREAM             28
>  #define CLKID_ASYNC_FIFO         29
> @@ -216,7 +216,7 @@
>  #define CLKID_ADC                45
>  #define CLKID_BLKMV              46
>  #define CLKID_AIU                47
> -#define CLKID_UART1              48
> +/* CLKID_UART1 */
>  #define CLKID_G2D                49
>  /* CLKID_USB0 */
>  /* CLKID_USB1 */
> @@ -236,7 +236,7 @@
>  /* CLKID_USB0_DDR_BRIDGE */
>  #define CLKID_MMC_PCLK           66
>  #define CLKID_DVIN               67
> -#define CLKID_UART2              68
> +/* CLKID_UART2 */
>  /* #define CLKID_SANA */
>  #define CLKID_VPU_INTR           70
>  #define CLKID_SEC_AHB_AHB3_BRIDGE 71
> diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h
> index 692846c7941b..7b329df47752 100644
> --- a/include/dt-bindings/clock/gxbb-clkc.h
> +++ b/include/dt-bindings/clock/gxbb-clkc.h
> @@ -15,13 +15,16 @@
>  #define CLKID_SPI              34
>  #define CLKID_I2C              22
>  #define CLKID_SAR_ADC          23
> +#define CLKID_UART0            26
>  #define CLKID_ETH              36
> +#define CLKID_UART1            48
>  #define CLKID_USB0             50
>  #define CLKID_USB1             51
>  #define CLKID_USB              55
>  #define CLKID_HDMI_PCLK                63
>  #define CLKID_USB1_DDR_BRIDGE  64
>  #define CLKID_USB0_DDR_BRIDGE  65
> +#define CLKID_UART2            68
>  #define CLKID_SANA             69
>  #define CLKID_GCLK_VENCI_INT0  77
>  #define CLKID_AO_I2C           93
> --
> 2.11.0
> 

[PATCH v3 2/4] dt-binding: meson_uart: add documentation for the UARTs of amlogic

[Martin Blumenstingl]

Hi Helmut,

On Fri, Mar 31, 2017 at 6:54 PM, Helmut Klein <hgkr.klein@gmail.com> wrote:
> Add the documentation for the device tree binding of meson_uart
>
> Signed-off-by: Helmut Klein <hgkr.klein@gmail.com>
> ---
>  .../bindings/serial/amlogic,meson_uart.txt         | 30 ++++++++++++++++++++++
>  1 file changed, 30 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt
>
> diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt b/Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt
> new file mode 100644
> index 000000000000..8250a191c2fc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt
> @@ -0,0 +1,30 @@
> +* Amlogic Meson UART, used in multiple SoCs (e.g. S905, s905X, ...)
> +
> +Required properties:
> +- compatible   : "amlogic,meson-uart"
> +- reg          : offset and length of the register set for the device.
> +- interrupts   : device interrupt
> +- clocks       : a list of phandle + clock-specifier pairs, one for each
> +                   entry in clock names.
> +- clocks-names : contains:
> +   * "xtal" for the baud rate clock
> +   * "core" for the core clock of none AO UARTs (optional)
I'm not sure if we should name the first clock "xtal" as on Meson8b
clk81 is used as input, see [0].
maybe "refclk" or "clkin" (the latter is already used in other meson
drivers, see sd_emmc_*, saradc, ethmac, and so on)

apart from that the whole series is a good thing (if the other small
nits - for example from Rob - are fixed)!


[0] http://elixir.free-electrons.com/linux/latest/source/arch/arm/boot/dts/meson8b.dtsi#L135

[PATCH v3 0/4] tty/serial: meson_uart: add support for core clock handling

[Neil Armstrong]

Hi Helmut,


On 03/31/2017 06:54 PM, Helmut Klein wrote:
> To be able to use the three none AO uarts of the meson gx SoCs (uart_A,
> uart_B & uart_C), the core clock has to be enabled (see chapter 22.3 of
> the public s905 data sheet).
> At least the u-boot of my s905 based media player (netxeon minimx-g)
> doesn't do this. so the driver must enable the clock.
> 
> This patch set does:
> - exposes the UART clock ids to the dtb
> - adds documentation for the dt-bindings of meson_uart
> - adds the core clock handling to the driver
> - adds the core clock handling to meson-gxbb.dtsi and meson-gxl.dtsi
> 
> The patchset is based on the branch "master" of the repository in [1]
> 
> Changes since v2
> - mail subjects reworked
> - add clocks/clock-names to the documentation
> - add core clock handling to meson-gxbb.dtsi & meson-gxl.dtsi
> 
> Changes since v1
> - use git to produce the patch set
> - added the clock ids for uart_B and uart_C
> 
> [1] git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git

I'll take the first patch then I will need to rework your patchset (keeping your
autorship, don't worry) since we need to handle the old bindings.

I'll post it for review when ready.

Anyway, thanks for the patchset.

Neil

> 
> Helmut Klein (4):
>   clk: meson: gxbb: expose CLKID_UARTx
>   dt-bindings: meson_uart: add documentation for meson UARTs
>   tty/serial: meson_uart: add the core clock handling to the driver
>   ARM64: dts: meson-gx: add core clock support for uart_A, uart_B and
>     uart_C
> 
>  .../bindings/serial/amlogic,meson_uart.txt         | 30 ++++++++++++++++++++++
>  arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi        | 15 +++++++++++
>  arch/arm64/boot/dts/amlogic/meson-gxl.dtsi         | 15 +++++++++++
>  drivers/clk/meson/gxbb.h                           |  6 ++---
>  drivers/tty/serial/meson_uart.c                    | 10 ++++++++
>  include/dt-bindings/clock/gxbb-clkc.h              |  3 +++
>  6 files changed, 76 insertions(+), 3 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt
> 
> --
> 2.11.0
> 
> 
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic
> 

[PATCH v3 1/4] dt-bindings: clock: gxbb: expose UART clocks

[Neil Armstrong]

Hi Helmut,

On 03/31/2017 06:54 PM, Helmut Klein wrote:
> Expose the clock ids of the three none AO uarts to the dt-bindings
> 
> Signed-off-by: Helmut Klein <hgkr.klein@gmail.com>
> ---
>  drivers/clk/meson/gxbb.h              | 6 +++---
>  include/dt-bindings/clock/gxbb-clkc.h | 3 +++
>  2 files changed, 6 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h
> index 8ee2022ce5d5..1edfaa5fe307 100644
> --- a/drivers/clk/meson/gxbb.h
> +++ b/drivers/clk/meson/gxbb.h
> @@ -194,7 +194,7 @@
>  /* #define CLKID_SAR_ADC */
>  #define CLKID_SMART_CARD	  24
>  #define CLKID_RNG0		  25
> -#define CLKID_UART0		  26
> +/* CLKID_UART0 */
>  #define CLKID_SDHC		  27
>  #define CLKID_STREAM		  28
>  #define CLKID_ASYNC_FIFO	  29
> @@ -216,7 +216,7 @@
>  #define CLKID_ADC		  45
>  #define CLKID_BLKMV		  46
>  #define CLKID_AIU		  47
> -#define CLKID_UART1		  48
> +/* CLKID_UART1 */
>  #define CLKID_G2D		  49
>  /* CLKID_USB0 */
>  /* CLKID_USB1 */
> @@ -236,7 +236,7 @@
>  /* CLKID_USB0_DDR_BRIDGE */
>  #define CLKID_MMC_PCLK		  66
>  #define CLKID_DVIN		  67
> -#define CLKID_UART2		  68
> +/* CLKID_UART2 */
>  /* #define CLKID_SANA */
>  #define CLKID_VPU_INTR		  70
>  #define CLKID_SEC_AHB_AHB3_BRIDGE 71
> diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h
> index 692846c7941b..7b329df47752 100644
> --- a/include/dt-bindings/clock/gxbb-clkc.h
> +++ b/include/dt-bindings/clock/gxbb-clkc.h
> @@ -15,13 +15,16 @@
>  #define CLKID_SPI		34
>  #define CLKID_I2C		22
>  #define CLKID_SAR_ADC		23
> +#define CLKID_UART0		26
>  #define CLKID_ETH		36
> +#define CLKID_UART1		48
>  #define CLKID_USB0		50
>  #define CLKID_USB1		51
>  #define CLKID_USB		55
>  #define CLKID_HDMI_PCLK		63
>  #define CLKID_USB1_DDR_BRIDGE	64
>  #define CLKID_USB0_DDR_BRIDGE	65
> +#define CLKID_UART2		68
>  #define CLKID_SANA		69
>  #define CLKID_GCLK_VENCI_INT0	77
>  #define CLKID_AO_I2C		93

Acked-by: Neil Armstrong <narmstrong@baylibre.com>

I rebased on 4.12-rc1 and applied on next/headers.

Thanks,
Neil