[PATCH V1 9/9] arm64: dts: add ccu for SC9860

[sboyd@codeaurora.org (Stephen Boyd)]

On 06/18, Chunyan Zhang wrote:
> diff --git a/arch/arm64/boot/dts/sprd/sc9860-ccu.dtsi b/arch/arm64/boot/dts/sprd/sc9860-ccu.dtsi
> new file mode 100644
> index 0000000..e15bf2d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/sprd/sc9860-ccu.dtsi
> @@ -0,0 +1,67 @@
> +/*
> + * Spreadtrum SC9860 SoC CCU
> + *
> + * Copyright (C) 2017, Spreadtrum Communications Inc.
> + *
> + * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> + */
> +
> +&soc {
> +	ext_26m: ext-26m {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <26000000>;
> +		clock-output-names = "ext-26m";
> +	};
> +
> +	ext_32m_sine0: ext-32m-sine0 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <32000000>;
> +		clock-output-names = "ext-32m-sine0";
> +	};
> +
> +	ext_32m_sine1: ext-32m-sine1 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <32000000>;
> +		clock-output-names = "ext-32m-sine1";
> +	};
> +
> +	ext_rco_100m: ext-rco-100m {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <100000000>;
> +		clock-output-names = "ext-rco-100m";
> +	};
> +
> +	ext_32k: ext-32k {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <32768>;
> +		clock-output-names = "ext-32k";
> +	};

These should all be outside of the soc node as they're probably
on the board and not the SoC? The hint is that they don't have a
reg property.

> +
> +	ccu: clk {

clock-controller is a more standard node name.

> +		compatible = "sprd,sc9860-ccu";
> +		#clock-cells = <1>;
> +		reg = <0 0x20000000 0 0x400>,
> +		      <0 0x20210000 0 0x3000>,
> +		      <0 0x402b0000 0 0x4000>,
> +		      <0 0x402d0000 0 0x400>,
> +		      <0 0x402e0000 0 0x4000>,
> +		      <0 0x40400000 0 0x400>,
> +		      <0 0x40880000 0 0x400>,
> +		      <0 0x415e0000 0 0x400>,
> +		      <0 0x60200000 0 0x400>,
> +		      <0 0x61000000 0 0x400>,
> +		      <0 0x61100000 0 0x3000>,
> +		      <0 0x62000000 0 0x4000>,
> +		      <0 0x62100000 0 0x4000>,
> +		      <0 0x63000000 0 0x400>,
> +		      <0 0x63100000 0 0x3000>,
> +		      <0 0x70b00000 0 0x3000>;

There are a lot of reg properties here. Perhaps there needs to be
different nodes for the different clock controllers in this SoC?

> +		clocks = <&ext_26m>, <&ext_rco_100m>, <&ext_32k>;
> +		clock-names = "ext-26m", "ext-rco-100m", "ext-32k";
> +	};

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project