[PATCH 0/3] pci: add support for firmware initialized designware RCs

[helgaas@kernel.org (Bjorn Helgaas)]

On Mon, Aug 21, 2017 at 08:29:04PM +0100, Ard Biesheuvel wrote:
> UEFI based systems incorporating a Synopsys Designware PCIe controller
> in RC mode will typically configure it before entering the OS. If this
> configuration is fully static and ECAM compliant, there is no need to
> expose particulars of the device to the OS, and we can simply describe
> it as "pci-host-ecam-generic".

I *love* the idea of moving more of this to firmware.  I spend an
incredible amount of time looking at all these native drivers, and
*zero* time looking at the ACPI driver (pci_root.c).  And it's not
like all this code in the native drivers is adding features or
performance.  It's just extra work for no benefit.

I'm assuming there'll be a v2 soon for the kbuild warnings.

> However, the Synopsys IP may be synthesized in a way where a quirk is
> needed for config space accesses to the first bus. It makes little sense
> to instantiate yet another pcie-designware driver that contains all the
> low level setup code, but it is also not justified to add quirks handling
> to the generic ECAM driver.
> 
> So instead, create a variant of the generic ECAM driver that filters config
> space accesses directed at device #1 and up on the first bus.
> 
> Also, add a binding and driver to support the MSI functionality available
> in some versions of this IP. This allows the MSI routing to be described
> at the DT level rather than hardcoding it in the driver.
> 
> Cc: Leif Lindholm <leif.lindholm@linaro.org>
> Cc: Graeme Gregory <graeme.gregory@linaro.org>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Cc: Jingoo Han <jingoohan1@gmail.com>
> Cc: Joao Pinto <Joao.Pinto@synopsys.com>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> 
> Ard Biesheuvel (3):
>   pci: designware: add driver for DWC controller in ECAM shift mode
>   pci: designware: add separate driver for the MSI part of the RC
>   dt-bindings: designware: add binding for Designware PCIe in ECAM mode
> 
>  Documentation/devicetree/bindings/pci/designware-pcie-ecam.txt |  56 +++++
>  drivers/pci/dwc/Kconfig                                        |  11 +
>  drivers/pci/dwc/Makefile                                       |   4 +-
>  drivers/pci/dwc/pcie-designware-ecam.c                         |  75 ++++++
>  drivers/pci/dwc/pcie-designware-msi.c                          | 255 ++++++++++++++++++++
>  5 files changed, 400 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/pci/designware-pcie-ecam.txt
>  create mode 100644 drivers/pci/dwc/pcie-designware-ecam.c
>  create mode 100644 drivers/pci/dwc/pcie-designware-msi.c
> 
> -- 
> 2.11.0
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel