From: jhogan@kernel.org (James Hogan)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 7/8] MIPS: BMIPS: Add PCI bindings for 7425, 7435
Date: Fri, 9 Mar 2018 14:44:21 +0000 [thread overview]
Message-ID: <20180309144420.GG24558@saruman> (raw)
In-Reply-To: <1516058925-46522-8-git-send-email-jim2101024@gmail.com>
On Mon, Jan 15, 2018 at 06:28:44PM -0500, Jim Quinlan wrote:
> diff --git a/arch/mips/boot/dts/brcm/bcm7425.dtsi b/arch/mips/boot/dts/brcm/bcm7425.dtsi
> index e4fb9b6..02168d0 100644
> --- a/arch/mips/boot/dts/brcm/bcm7425.dtsi
> +++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi
> @@ -495,4 +495,30 @@
> status = "disabled";
> };
> };
> +
> + pcie: pcie at 10410000 {
> + reg = <0x10410000 0x830c>;
> + compatible = "brcm,bcm7425-pcie";
> + interrupts = <37>, <37>;
> + interrupt-names = "pcie", "msi";
> + interrupt-parent = <&periph_intc>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + linux,pci-domain = <0>;
> + brcm,enable-ssc;
> + bus-range = <0x00 0xff>;
> + msi-controller;
> + #interrupt-cells = <1>;
> + /* 4x128mb windows */
> + ranges = <0x2000000 0x0 0xd0000000 0xd0000000 0 0x08000000>,
> + <0x2000000 0x0 0xd8000000 0xd8000000 0 0x08000000>,
> + <0x2000000 0x0 0xe0000000 0xe0000000 0 0x08000000>,
> + <0x2000000 0x0 0xe8000000 0xe8000000 0 0x08000000>;
> + interrupt-map-mask = <0 0 0 7>;
> + interrupt-map = <0 0 0 1 &periph_intc 33
> + 0 0 0 2 &periph_intc 34
> + 0 0 0 3 &periph_intc 35
> + 0 0 0 4 &periph_intc 36>;
no status = "disabled" like the other dtsi?
> + };
> +
> };
> diff --git a/arch/mips/boot/dts/brcm/bcm7435.dtsi b/arch/mips/boot/dts/brcm/bcm7435.dtsi
> index 1484e89..84881224 100644
> --- a/arch/mips/boot/dts/brcm/bcm7435.dtsi
> +++ b/arch/mips/boot/dts/brcm/bcm7435.dtsi
> @@ -510,4 +510,31 @@
> status = "disabled";
> };
> };
> +
> + pcie: pcie at 10410000 {
> + reg = <0x10410000 0x930c>;
> + interrupts = <0x27>, <0x27>;
> + interrupt-names = "pcie", "msi";
> + interrupt-parent = <&periph_intc>;
> + compatible = "brcm,bcm7435-pcie";
Might be nice to be consistent in your property ordering between these
two dtsi files. I for one would prefer compatible to be near the top
too, if only for consistency with most other nodes in these files.
> + #address-cells = <3>;
> + #size-cells = <2>;
> + linux,pci-domain = <0>;
> + brcm,enable-ssc;
> + bus-range = <0x00 0xff>;
> + msi-controller;
> + #interrupt-cells = <1>;
> + /* 4x128mb windows */
> + ranges = <0x2000000 0x0 0xd0000000 0xd0000000 0 0x08000000>,
> + <0x2000000 0x0 0xd8000000 0xd8000000 0 0x08000000>,
> + <0x2000000 0x0 0xe0000000 0xe0000000 0 0x08000000>,
> + <0x2000000 0x0 0xe8000000 0xe8000000 0 0x08000000>;
> + interrupt-map-mask = <0 0 0 7>;
> + interrupt-map = <0 0 0 1 &periph_intc 35
> + 0 0 0 2 &periph_intc 36
> + 0 0 0 3 &periph_intc 37
> + 0 0 0 4 &periph_intc 38>;
> + status = "disabled";
> + };
> +
> };
Cheers
James
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180309/edb1389d/attachment.sig>
next prev parent reply other threads:[~2018-03-09 14:44 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-15 23:28 [PATCH v4 0/8] PCI: brcmstb: Add Broadcom Settopbox PCIe support Jim Quinlan
2018-01-15 23:28 ` [PATCH v4 1/8] SOC: brcmstb: add memory API Jim Quinlan
2018-03-09 15:07 ` James Hogan
2018-01-15 23:28 ` [PATCH v4 2/8] dt-bindings: pci: Add DT docs for Brcmstb PCIe device Jim Quinlan
2018-01-19 19:20 ` Rob Herring
2018-01-15 23:28 ` [PATCH v4 3/8] PCI: brcmstb: Add Broadcom STB PCIe host controller driver Jim Quinlan
2018-01-15 23:28 ` [PATCH v4 4/8] PCI: brcmstb: Add dma-range mapping for inbound traffic Jim Quinlan
2018-01-18 2:15 ` Rob Herring
2018-01-18 7:31 ` Christoph Hellwig
2018-01-18 15:09 ` Florian Fainelli
2018-01-18 15:23 ` Christoph Hellwig
2018-01-19 19:47 ` Florian Fainelli
2018-01-23 13:20 ` Christoph Hellwig
2018-01-24 20:04 ` Florian Fainelli
2018-01-26 7:53 ` Christoph Hellwig
2018-01-26 17:46 ` Jim Quinlan
2018-02-12 13:39 ` Jim Quinlan
2018-01-15 23:28 ` [PATCH v4 5/8] PCI/MSI: Enable PCI_MSI_IRQ_DOMAIN support for MIPS Jim Quinlan
2018-01-15 23:28 ` [PATCH v4 6/8] PCI: brcmstb: Add MSI capability Jim Quinlan
2018-01-15 23:28 ` [PATCH v4 7/8] MIPS: BMIPS: Add PCI bindings for 7425, 7435 Jim Quinlan
2018-03-09 14:44 ` James Hogan [this message]
2018-01-15 23:28 ` [PATCH v4 8/8] MIPS: BMIPS: Enable PCI Jim Quinlan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180309144420.GG24558@saruman \
--to=jhogan@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).