Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: dianders@chromium.org (Douglas Anderson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] arm64: dts: qcom: sdm845: Add USB-related nodes
Date: Tue, 10 Jul 2018 15:02:00 -0700
Message-ID: <20180710220202.116404-2-dianders@chromium.org> (raw)
In-Reply-To: <20180710220202.116404-1-dianders@chromium.org>

From: Manu Gautam <mgautam@codeaurora.org>

This adds nodes for USB and related PHYs.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
[dianders: reworked quite a bit]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

 arch/arm64/boot/dts/qcom/sdm845.dtsi | 189 +++++++++++++++++++++++++++
 1 file changed, 189 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 15188d34a2ab..1de59a39f4fa 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qusb2.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
 / {
@@ -249,6 +250,18 @@
 			#power-domain-cells = <1>;
 		};
 
+		qfprom at 780000 {
+			compatible = "qcom,qfprom";
+			reg = <0x780000 0x8ff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2p_hstx_trim: hstx-trim at 1eb {
+				reg = <0x1eb 0x1>;
+				bits = <1 4>;
+			};
+		};
+
 		qupv3_id_0: geniqup at 8c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0x8c0000 0x6000>;
@@ -961,6 +974,182 @@
 			};
 		};
 
+		usb_1_hsphy: phy at 88e2000 {
+			compatible = "qcom,sdm845-qusb2-phy";
+			reg = <0x88e2000 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			nvmem-cells = <&qusb2p_hstx_trim>;
+		};
+
+		usb_2_hsphy: phy at 88e3000 {
+			compatible = "qcom,sdm845-qusb2-phy";
+			reg = <0x88e3000 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+		};
+
+		usb_1_qmpphy: phy at 88e9000 {
+			compatible = "qcom,sdm845-qmp-usb3-phy";
+			reg = <0x88e9000 0x18c>,
+			      <0x88e8000 0x10>;
+			reg-names = "reg-base", "dp_com";
+			status = "disabled";
+			#clock-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			usb_1_ssphy: lane at 88e9200 {
+				reg = <0x88e9200 0x128>,
+				      <0x88e9400 0x200>,
+				      <0x88e9c00 0x218>,
+				      <0x88e9a00 0x100>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_phy_pipe_clk_src";
+			};
+		};
+
+		usb_2_qmpphy: phy at 88eb000 {
+			compatible = "qcom,sdm845-qmp-usb3-uni-phy";
+			reg = <0x88eb000 0x18c>;
+			status = "disabled";
+			#clock-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3_PHY_SEC_BCR>;
+			reset-names = "phy", "common";
+
+			usb_2_ssphy: lane at 88eb200 {
+				reg = <0x88eb200 0x128>,
+				      <0x88eb400 0x1fc>,
+				      <0x88eb800 0x218>,
+				      <0x88e9600 0x70>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			};
+		};
+
+		usb_1: usb at a6f8800 {
+			compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
+			reg = <0xa6f8800 0x400>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+				      "sleep";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <150000000>;
+
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			usb_1_dwc3: dwc3 at a600000 {
+				compatible = "snps,dwc3";
+				reg = <0xa600000 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		usb_2: usb at a8f8800 {
+			compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
+			reg = <0xa8f8800 0x400>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB30_SEC_SLEEP_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+				      "sleep";
+
+			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <150000000>;
+
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_SEC_GDSC>;
+
+			resets = <&gcc GCC_USB30_SEC_BCR>;
+
+			usb_2_dwc3: dwc3 at a800000 {
+				compatible = "snps,dwc3";
+				reg = <0xa800000 0xcd00>;
+				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
 		spmi_bus: spmi at c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0xc440000 0x1100>,
-- 
2.18.0.203.gfac676dfb9-goog

  reply index

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-10 22:01 [PATCH 0/3] arm64: dts: sdm845: Add RPMh-regulators and usb Douglas Anderson
2018-07-10 22:02 ` Douglas Anderson [this message]
2018-07-12 16:56   ` [PATCH 1/3] arm64: dts: qcom: sdm845: Add USB-related nodes Doug Anderson
2018-07-10 22:02 ` [PATCH 2/3] arm64: dts: qcom: sdm845-mtp: Add RPMh VRM/XOB regulators Douglas Anderson
2018-07-10 22:32   ` David Collins
2018-07-10 22:55     ` Doug Anderson
2018-07-10 23:01       ` David Collins
2018-07-11  2:57   ` kbuild test robot
2018-07-10 22:02 ` [PATCH 3/3] arm64: dts: qcom: sdm845-mtp: Add nodes for USB Douglas Anderson
2018-08-10 21:51 [PATCH 0/3] arm64: dts: sdm845: Add RPMh-regulators and usb Douglas Anderson
2018-08-10 21:51 ` [PATCH 1/3] arm64: dts: qcom: sdm845: Add USB-related nodes Douglas Anderson
2018-08-20 18:17   ` Stephen Boyd
2018-08-22 17:37     ` Doug Anderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180710220202.116404-2-dianders@chromium.org \
    --to=dianders@chromium.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git