From mboxrd@z Thu Jan 1 00:00:00 1970 From: embed3d@gmail.com (Philipp Rossak) Date: Thu, 30 Aug 2018 17:44:48 +0200 Subject: [PATCH v3 00/30] IIO-based thermal sensor driver for Allwinner H3 and A83T SoC Message-ID: <20180830154518.29507-1-embed3d@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Allwiner H3 and A83T SoCs have a thermal sensor, which is a large refactored version of the old Allwinner "GPADC" (although it have already only thermal part left in A33). This patch tried to add support for the sensor in H3 and A83T based on This Patchtseries was in the beginning based on Icenowy Zengs v4 patchseries [1]. Since we decided to merge the mfd driver into the GPADC this changed. So only one patch could be reused. Patches that adds support for H5, A64, A80 and H6 SoCs are allready prepared, and will be upstreamed if this patchseries is applied and the testing is done. Sorry for delaying this. Regards, Philipp changes since v2: * mfd driver is now merged into the gpadc driver * complete rework changes since v1: * collecting all acks * rewording commits/fix typos * move code in place where it is used * fix naming conventions of defines * clarify commits * update documentation to cover the new nvmem calibraion * change nvmem calibration Icenowy Zheng (1): iio: adc: sun4i-gpadc-iio: rename A33-specified registers to contain A33 Philipp Rossak (29): mfd: Makefile: Remove build option for MFD:sun4i-gpadc mfd: Kconfig: Remove MFD_SUN4I_GPADC config option iio: adc: Remove ID table iio: adc: Kconfig: Update Kconfig to new build options iio: adc: move SUN4I_GPADC_CHANNEL define to header file iio: adc: remove ofnode options iio: adc: remove mfd_probe & sunwi_irq_init function iio: adc: remove hwmon structure iio: adc: Threat A33 as thermal sensor and remove non thermal sun4i channel iio: adc: rework irq and adc_channel handling iio: adc: add new compatibles mfd: Remove old mfd driver & Move sun4i-gpadc.h to iio/adc/ arm: config: Enable SUN4I_GPADC in defconfig dt-bindings: update the Allwinner GPADC device tree binding for H3 & A83T iio: adc: sun4i-gpadc-iio: rework: readout temp_data iio: adc: sun4i-gpadc-iio: rework: support clocks and reset iio: adc: sun4i-gpadc-iio: rework: support multiple sensors iio: adc: sun4i-gpadc-iio: rework: support nvmem calibration data iio: adc: sun4i-gpadc-iio: rework: device specific suspend & resume iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor iio: adc: sun4i-gpadc-iio: add support for A83T thermal sensor ARM: dts: sunxi-h3-h5: add support for the thermal sensor in H3 and H5 ARM: dts: sun8i: h3: add support for the thermal sensor in H3 ARM: dts: sun8i: h3: add thermal zone to H3 ARM: dts: sun8i: h3: enable H3 sid controller ARM: dts: sun8i: h3: use calibration for ths ARM: dts: sun8i: a83t: add support for the thermal sensor in A83T ARM: dts: sun8i: a83t: add thermal zone to A83T ARM: sun8i: a83t: full range OPP tables and CPUfreq .../devicetree/bindings/iio/adc/sun4i-gpadc.txt | 41 +- arch/arm/boot/dts/sun8i-a83t.dtsi | 143 +++++ arch/arm/boot/dts/sun8i-h3.dtsi | 52 ++ arch/arm/boot/dts/sunxi-h3-h5.dtsi | 10 + arch/arm/configs/sunxi_defconfig | 1 + drivers/iio/adc/Kconfig | 11 +- drivers/iio/adc/sun4i-gpadc-iio.c | 617 +++++++++++++-------- drivers/mfd/Kconfig | 17 - drivers/mfd/Makefile | 1 - drivers/mfd/sun4i-gpadc.c | 181 ------ include/linux/{mfd => iio/adc}/sun4i-gpadc.h | 47 +- 11 files changed, 681 insertions(+), 440 deletions(-) delete mode 100644 drivers/mfd/sun4i-gpadc.c rename include/linux/{mfd => iio/adc}/sun4i-gpadc.h (72%) -- 2.11.0