From mboxrd@z Thu Jan 1 00:00:00 1970 From: embed3d@gmail.com (Philipp Rossak) Date: Thu, 30 Aug 2018 17:44:52 +0200 Subject: [PATCH v3 04/30] iio: adc: Kconfig: Update Kconfig to new build options In-Reply-To: <20180830154518.29507-1-embed3d@gmail.com> References: <20180830154518.29507-1-embed3d@gmail.com> Message-ID: <20180830154518.29507-5-embed3d@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Since we are merging the mfd driver into the iio adc driver we need to update the Kconfig build options. Signed-off-by: Philipp Rossak --- drivers/iio/adc/Kconfig | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 9da79070357c..5d0cffd6d2e4 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -713,13 +713,16 @@ config STX104 array module parameter. config SUN4I_GPADC - tristate "Support for the Allwinner SoCs GPADC" + tristate "Allwinner sunxi platforms' GPADC/Thermal driver" + select REGMAP_MMIO + select REGMAP_IRQ depends on IIO - depends on MFD_SUN4I_GPADC || MACH_SUN8I - depends on THERMAL || !THERMAL_OF + depends on ARCH_SUNXI || MACH_SUN8I + depends on THERMAL && THERMAL_OF help Say yes here to build support for Allwinner (A10, A13 and A31) SoCs - GPADC. This ADC provides 4 channels which can be used as an ADC or as + GPADC or newer SOCs (A33, H3, A83T, ...) Thermal sensor driver. + This ADC provides 4 channels which can be used as an ADC or as a touchscreen input and one channel for thermal sensor. The thermal sensor slows down ADC readings and can be disabled by -- 2.11.0