[PATCH v3 1/7] ata: libahci_platform: comply to PHY framework

From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Gregory Clement <gregory.clement@bootlin.com>,
	Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>, Jens Axboe <axboe@kernel.dk>,
	Hans de Goede <hdegoede@redhat.com>
Cc: devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
	Antoine Tenart <antoine.tenart@bootlin.com>,
	Maxime Chevallier <maxime.chevallier@bootlin.com>,
	Nadav Haklai <nadavh@marvell.com>,
	linux-ide@vger.kernel.org,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/7] ata: libahci_platform: comply to PHY framework
Date: Tue,  4 Dec 2018 20:28:25 +0100	[thread overview]
Message-ID: <20181204192831.12440-2-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20181204192831.12440-1-miquel.raynal@bootlin.com>

Current implementation of the libahci does not take into account the
new PHY framework. Correct the situation by adding a call to
phy_set_mode() before phy_power_on().

PHYs should also be handled at suspend/resume time. For this, call
ahci_platform_enable/disable_phys() at suspend/resume_host() time. These
calls are guarded by a HFLAG (AHCI_HFLAG_SUSPEND_PHYS) that the user of
the libahci driver must set manually in hpriv->flags at probe time. This
is to avoid breaking users that have not been tested with this change.

Suggested-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/ata/ahci.h             |  2 ++
 drivers/ata/libahci_platform.c | 13 +++++++++++++
 2 files changed, 15 insertions(+)

diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index ef356e70e6de..8810475f307a 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -254,6 +254,8 @@ enum {
 	AHCI_HFLAG_IS_MOBILE		= (1 << 25), /* mobile chipset, use
 							SATA_MOBILE_LPM_POLICY
 							as default lpm_policy */
+	AHCI_HFLAG_SUSPEND_PHYS		= (1 << 26), /* handle PHYs during
+							suspend/resume */
 
 	/* ap->flags bits */
 
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index 4b900fc659f7..81b1a3332ed6 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -56,6 +56,12 @@ static int ahci_platform_enable_phys(struct ahci_host_priv *hpriv)
 		if (rc)
 			goto disable_phys;
 
+		rc = phy_set_mode(hpriv->phys[i], PHY_MODE_SATA);
+		if (rc) {
+			phy_exit(hpriv->phys[i]);
+			goto disable_phys;
+		}
+
 		rc = phy_power_on(hpriv->phys[i]);
 		if (rc) {
 			phy_exit(hpriv->phys[i]);
@@ -738,6 +744,9 @@ int ahci_platform_suspend_host(struct device *dev)
 	writel(ctl, mmio + HOST_CTL);
 	readl(mmio + HOST_CTL); /* flush */
 
+	if (hpriv->flags & AHCI_HFLAG_SUSPEND_PHYS)
+		ahci_platform_disable_phys(hpriv);
+
 	return ata_host_suspend(host, PMSG_SUSPEND);
 }
 EXPORT_SYMBOL_GPL(ahci_platform_suspend_host);
@@ -756,6 +765,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_suspend_host);
 int ahci_platform_resume_host(struct device *dev)
 {
 	struct ata_host *host = dev_get_drvdata(dev);
+	struct ahci_host_priv *hpriv = host->private_data;
 	int rc;
 
 	if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
@@ -766,6 +776,9 @@ int ahci_platform_resume_host(struct device *dev)
 		ahci_init_controller(host);
 	}
 
+	if (hpriv->flags & AHCI_HFLAG_SUSPEND_PHYS)
+		ahci_platform_enable_phys(hpriv);
+
 	ata_host_resume(host);
 
 	return 0;
-- 
2.19.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
