linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Alexander Shiyan <shc_work@mail.ru>
To: linux-arm-kernel@lists.infradead.org
Cc: Shawn Guo <shawnguo@kernel.org>,
	Alexander Shiyan <shc_work@mail.ru>,
	kernel@pengutronix.de
Subject: [PATCH] ARM: dts: imx51: Add default bus-width property for esdhc1
Date: Wed, 19 Dec 2018 22:07:34 +0300	[thread overview]
Message-ID: <20181219190734.23331-1-shc_work@mail.ru> (raw)

This patch adds bus-width property for esdhc1 to avoid mmc
core warning: "bus-width" property is missing, assuming 1 bit.
Additionally, the patch removes this property for boards where
4-bit width is already specified, and adds 1-bit width for
boards where this property is omitted.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/boot/dts/imx51-apf51dev.dts                   | 1 -
 arch/arm/boot/dts/imx51-babbage.dts                    | 1 +
 arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts | 1 +
 arch/arm/boot/dts/imx51-ts4800.dts                     | 1 +
 arch/arm/boot/dts/imx51-zii-rdu1.dts                   | 1 -
 arch/arm/boot/dts/imx51.dtsi                           | 1 +
 6 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
index 3e1846a..b26d92f 100644
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ b/arch/arm/boot/dts/imx51-apf51dev.dts
@@ -97,7 +97,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
 	cd-gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 35ee1b4..8e86116 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -322,6 +322,7 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <1>;
 	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
index e9e819f..f2c3c87 100644
--- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
+++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
@@ -101,6 +101,7 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
+	bus-width = <1>;
 	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts
index 39eb067..e6d25a5 100644
--- a/arch/arm/boot/dts/imx51-ts4800.dts
+++ b/arch/arm/boot/dts/imx51-ts4800.dts
@@ -82,6 +82,7 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <1>;
 	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
index 69d753c..1287b57 100644
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@@ -459,7 +459,6 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	bus-width = <4>;
 	no-1-8-v;
 	non-removable;
 	no-sdio;
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 67d4627..eac432a 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -172,6 +172,7 @@
 						 <&clks IMX5_CLK_DUMMY>,
 						 <&clks IMX5_CLK_ESDHC1_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
 					status = "disabled";
 				};
 
-- 
2.10.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2018-12-19 19:08 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-19 19:07 Alexander Shiyan [this message]
2019-01-12  2:28 ` [PATCH] ARM: dts: imx51: Add default bus-width property for esdhc1 Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181219190734.23331-1-shc_work@mail.ru \
    --to=shc_work@mail.ru \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).