From: Alexander Shiyan <shc_work@mail.ru>
To: linux-arm-kernel@lists.infradead.org
Cc: Alexander Shiyan <shc_work@mail.ru>,
Shawn Guo <shawnguo@kernel.org>,
NXP Linux Team <linux-imx@nxp.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>
Subject: [PATCH 4/4] ARM: dts: imx6qdl-phytec-pfla02: Add some labels
Date: Sun, 23 Dec 2018 19:31:41 +0300 [thread overview]
Message-ID: <20181223163141.6792-4-shc_work@mail.ru> (raw)
In-Reply-To: <20181223163141.6792-1-shc_work@mail.ru>
This patch adds labels to devices that can be reused in top-level dts.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 81007d6..a685ff7 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -41,12 +41,12 @@
gpio_leds: leds {
compatible = "gpio-leds";
- green {
+ led_green: led_green {
label = "phyflex:green";
gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
};
- red {
+ led_red: led_red {
label = "phyflex:red";
gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
};
@@ -71,7 +71,7 @@
status = "okay";
cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
- flash@0 {
+ flash: flash@0 {
compatible = "m25p80", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
@@ -99,12 +99,12 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- eeprom@50 {
+ eeprom: eeprom@50 {
compatible = "atmel,24c32";
reg = <0x50>;
};
- pmic@58 {
+ pmic: pmic@58 {
compatible = "dlg,da9063";
reg = <0x58>;
interrupt-parent = <&gpio2>;
--
2.10.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2018-12-23 16:33 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-23 16:31 [PATCH 1/4] ARM: dts: imx6q-phytec-pbab01: Remove duplicate "chosen" node Alexander Shiyan
2018-12-23 16:31 ` [PATCH 2/4] ARM: dts: imx6q/dl-phytec-pfla02: Remove duplicate nodes Alexander Shiyan
2018-12-23 16:31 ` [PATCH 3/4] ARM: dts: imx6qdl-phytec-pfla02: Replace magic numbers Alexander Shiyan
2019-01-12 3:13 ` Shawn Guo
2018-12-23 16:31 ` Alexander Shiyan [this message]
2019-01-12 3:21 ` [PATCH 4/4] ARM: dts: imx6qdl-phytec-pfla02: Add some labels Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181223163141.6792-4-shc_work@mail.ru \
--to=shc_work@mail.ru \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).