[PATCH 10/17] ARM: davinci: da850: switch to using the clocksource driver

From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Sekhar Nori <nsekhar@ti.com>, Kevin Hilman <khilman@kernel.org>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Thomas Gleixner <tglx@linutronix.de>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>
Subject: [PATCH 10/17] ARM: davinci: da850: switch to using the clocksource driver
Date: Fri, 11 Jan 2019 18:21:27 +0100	[thread overview]
Message-ID: <20190111172134.30147-11-brgl@bgdev.pl> (raw)
In-Reply-To: <20190111172134.30147-1-brgl@bgdev.pl>

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now have a proper clocksource driver for davinci. Switch the platform
to using it.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/da850.c | 56 ++++++++++++++---------------------
 1 file changed, 22 insertions(+), 34 deletions(-)

diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 9ff377f26c4b..e5b855103193 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -34,7 +34,8 @@
 #include <mach/da8xx.h>
 #include <mach/irqs.h>
 #include <mach/pm.h>
-#include <mach/time.h>
+
+#include <clocksource/timer-davinci.h>
 
 #include "mux.h"
 
@@ -436,38 +437,24 @@ static struct davinci_id da850_ids[] = {
 	},
 };
 
-static struct davinci_timer_instance da850_timer_instance[4] = {
-	{
-		.base		= DA8XX_TIMER64P0_BASE,
-		.bottom_irq	= IRQ_DA8XX_TINT12_0,
-		.top_irq	= IRQ_DA8XX_TINT34_0,
-	},
-	{
-		.base		= DA8XX_TIMER64P1_BASE,
-		.bottom_irq	= IRQ_DA8XX_TINT12_1,
-		.top_irq	= IRQ_DA8XX_TINT34_1,
-	},
-	{
-		.base		= DA850_TIMER64P2_BASE,
-		.bottom_irq	= IRQ_DA850_TINT12_2,
-		.top_irq	= IRQ_DA850_TINT34_2,
-	},
-	{
-		.base		= DA850_TIMER64P3_BASE,
-		.bottom_irq	= IRQ_DA850_TINT12_3,
-		.top_irq	= IRQ_DA850_TINT34_3,
+static const struct davinci_timer_cfg da850_timer_cfg = {
+	.reg = {
+		.start		= DA8XX_TIMER64P0_BASE,
+		.end		= DA8XX_TIMER64P0_BASE + SZ_4K,
+		.flags		= IORESOURCE_MEM,
 	},
-};
-
-/*
- * T0_BOT: Timer 0, bottom		: Used for clock_event
- * T0_TOP: Timer 0, top			: Used for clocksource
- * T1_BOT, T1_TOP: Timer 1, bottom & top: Used for watchdog timer
- */
-static struct davinci_timer_info da850_timer_info = {
-	.timers		= da850_timer_instance,
-	.clockevent_id	= T0_BOT,
-	.clocksource_id	= T0_TOP,
+	.irq = {
+		{
+			.start	= IRQ_DA8XX_TINT12_0,
+			.end	= IRQ_DA8XX_TINT12_0,
+			.flags	= IORESOURCE_IRQ,
+		},
+		{
+			.start	= IRQ_DA8XX_TINT34_0,
+			.end	= IRQ_DA8XX_TINT34_0,
+			.flags	= IORESOURCE_IRQ,
+		}
+	}
 };
 
 #ifdef CONFIG_CPU_FREQ
@@ -742,7 +729,6 @@ static const struct davinci_soc_info davinci_soc_info_da850 = {
 	.intc_type		= DAVINCI_INTC_TYPE_CP_INTC,
 	.intc_irq_prios		= da850_default_priorities,
 	.intc_irq_num		= DA850_N_CP_INTC_IRQ,
-	.timer_info		= &da850_timer_info,
 	.emac_pdata		= &da8xx_emac_pdata,
 	.sram_dma		= DA8XX_SHARED_RAM_BASE,
 	.sram_len		= SZ_128K,
@@ -765,6 +751,7 @@ void __init da850_init_time(void)
 	void __iomem *pll0;
 	struct regmap *cfgchip;
 	struct clk *clk;
+	int rv;
 
 	clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DA850_REF_FREQ);
 
@@ -776,7 +763,8 @@ void __init da850_init_time(void)
 	clk = clk_get(NULL, "timer0");
 	WARN(IS_ERR(clk), "Unable to get the timer clock\n");
 
-	davinci_timer_init(clk);
+	rv = davinci_timer_register(clk, &da850_timer_cfg);
+	WARN(rv, "Unable to register the timer: %d\n", rv);
 }
 
 static struct resource da850_pll1_resources[] = {
-- 
2.19.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
