Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Daniel Thompson <daniel.thompson@linaro.org>
To: Sumit Garg <sumit.garg@linaro.org>
Cc: mark.rutland@arm.com, michal.lkml@markovi.net,
	herbert@gondor.apana.org.au, arnd@arndb.de,
	ard.biesheuvel@linaro.org, gregkh@linuxfoundation.org,
	bhsharma@redhat.com, linux-kernel@vger.kernel.org,
	tee-dev@lists.linaro.org, yamada.masahiro@socionext.com,
	robh+dt@kernel.org, linux-crypto@vger.kernel.org,
	mpm@selenic.com, jens.wiklander@linaro.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v6 4/4] hwrng: add OP-TEE based rng driver
Date: Tue, 29 Jan 2019 09:34:39 +0000
Message-ID: <20190129093439.oftwq4labucdql4b@holly.lan> (raw)
In-Reply-To: <1548740978-28495-5-git-send-email-sumit.garg@linaro.org>

On Tue, Jan 29, 2019 at 11:19:38AM +0530, Sumit Garg wrote:
> On ARM SoC's with TrustZone enabled, peripherals like entropy sources
> might not be accessible to normal world (linux in this case) and rather
> accessible to secure world (OP-TEE in this case) only. So this driver
> aims to provides a generic interface to OP-TEE based random number
> generator service.
> 
> This driver registers on TEE bus to interact with OP-TEE based rng
> device/service.
> 
> Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>


Daniel.

> ---
>  MAINTAINERS                        |   5 +
>  drivers/char/hw_random/Kconfig     |  15 ++
>  drivers/char/hw_random/Makefile    |   1 +
>  drivers/char/hw_random/optee-rng.c | 298 +++++++++++++++++++++++++++++++++++++
>  4 files changed, 319 insertions(+)
>  create mode 100644 drivers/char/hw_random/optee-rng.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 51029a4..dcef7e9 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11262,6 +11262,11 @@ M:	Jens Wiklander <jens.wiklander@linaro.org>
>  S:	Maintained
>  F:	drivers/tee/optee/
>  
> +OP-TEE RANDOM NUMBER GENERATOR (RNG) DRIVER
> +M:	Sumit Garg <sumit.garg@linaro.org>
> +S:	Maintained
> +F:	drivers/char/hw_random/optee-rng.c
> +
>  OPA-VNIC DRIVER
>  M:	Dennis Dalessandro <dennis.dalessandro@intel.com>
>  M:	Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
> diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
> index dac895d..25a7d8f 100644
> --- a/drivers/char/hw_random/Kconfig
> +++ b/drivers/char/hw_random/Kconfig
> @@ -424,6 +424,21 @@ config HW_RANDOM_EXYNOS
>  	  will be called exynos-trng.
>  
>  	  If unsure, say Y.
> +
> +config HW_RANDOM_OPTEE
> +	tristate "OP-TEE based Random Number Generator support"
> +	depends on OPTEE
> +	default HW_RANDOM
> +	help
> +	  This  driver provides support for OP-TEE based Random Number
> +	  Generator on ARM SoCs where hardware entropy sources are not
> +	  accessible to normal world (Linux).
> +
> +	  To compile this driver as a module, choose M here: the module
> +	  will be called optee-rng.
> +
> +	  If unsure, say Y.
> +
>  endif # HW_RANDOM
>  
>  config UML_RANDOM
> diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
> index e35ec3c..7c9ef4a 100644
> --- a/drivers/char/hw_random/Makefile
> +++ b/drivers/char/hw_random/Makefile
> @@ -38,3 +38,4 @@ obj-$(CONFIG_HW_RANDOM_CAVIUM) += cavium-rng.o cavium-rng-vf.o
>  obj-$(CONFIG_HW_RANDOM_MTK)	+= mtk-rng.o
>  obj-$(CONFIG_HW_RANDOM_S390) += s390-trng.o
>  obj-$(CONFIG_HW_RANDOM_KEYSTONE) += ks-sa-rng.o
> +obj-$(CONFIG_HW_RANDOM_OPTEE) += optee-rng.o
> diff --git a/drivers/char/hw_random/optee-rng.c b/drivers/char/hw_random/optee-rng.c
> new file mode 100644
> index 0000000..2b9fc8a
> --- /dev/null
> +++ b/drivers/char/hw_random/optee-rng.c
> @@ -0,0 +1,298 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2018-2019 Linaro Ltd.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/of.h>
> +#include <linux/hw_random.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/tee_drv.h>
> +#include <linux/uuid.h>
> +
> +#define DRIVER_NAME "optee-rng"
> +
> +#define TEE_ERROR_HEALTH_TEST_FAIL	0x00000001
> +
> +/*
> + * TA_CMD_GET_ENTROPY - Get Entropy from RNG
> + *
> + * param[0] (inout memref) - Entropy buffer memory reference
> + * param[1] unused
> + * param[2] unused
> + * param[3] unused
> + *
> + * Result:
> + * TEE_SUCCESS - Invoke command success
> + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> + * TEE_ERROR_NOT_SUPPORTED - Requested entropy size greater than size of pool
> + * TEE_ERROR_HEALTH_TEST_FAIL - Continuous health testing failed
> + */
> +#define TA_CMD_GET_ENTROPY		0x0
> +
> +/*
> + * TA_CMD_GET_RNG_INFO - Get RNG information
> + *
> + * param[0] (out value) - value.a: RNG data-rate in bytes per second
> + *                        value.b: Quality/Entropy per 1024 bit of data
> + * param[1] unused
> + * param[2] unused
> + * param[3] unused
> + *
> + * Result:
> + * TEE_SUCCESS - Invoke command success
> + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> + */
> +#define TA_CMD_GET_RNG_INFO		0x1
> +
> +#define MAX_ENTROPY_REQ_SZ		(4 * 1024)
> +
> +/**
> + * struct optee_rng_private - OP-TEE Random Number Generator private data
> + * @dev:		OP-TEE based RNG device.
> + * @ctx:		OP-TEE context handler.
> + * @session_id:		RNG TA session identifier.
> + * @data_rate:		RNG data rate.
> + * @entropy_shm_pool:	Memory pool shared with RNG device.
> + * @optee_rng:		OP-TEE RNG driver structure.
> + */
> +struct optee_rng_private {
> +	struct device *dev;
> +	struct tee_context *ctx;
> +	u32 session_id;
> +	u32 data_rate;
> +	struct tee_shm *entropy_shm_pool;
> +	struct hwrng optee_rng;
> +};
> +
> +#define to_optee_rng_private(r) \
> +		container_of(r, struct optee_rng_private, optee_rng)
> +
> +static size_t get_optee_rng_data(struct optee_rng_private *pvt_data,
> +				 void *buf, size_t req_size)
> +{
> +	u32 ret = 0;
> +	u8 *rng_data = NULL;
> +	size_t rng_size = 0;
> +	struct tee_ioctl_invoke_arg inv_arg = {0};
> +	struct tee_param param[4] = {0};
> +
> +	/* Invoke TA_CMD_GET_ENTROPY function of Trusted App */
> +	inv_arg.func = TA_CMD_GET_ENTROPY;
> +	inv_arg.session = pvt_data->session_id;
> +	inv_arg.num_params = 4;
> +
> +	/* Fill invoke cmd params */
> +	param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT;
> +	param[0].u.memref.shm = pvt_data->entropy_shm_pool;
> +	param[0].u.memref.size = req_size;
> +	param[0].u.memref.shm_offs = 0;
> +
> +	ret = tee_client_invoke_func(pvt_data->ctx, &inv_arg, param);
> +	if ((ret < 0) || (inv_arg.ret != 0)) {
> +		dev_err(pvt_data->dev, "TA_CMD_GET_ENTROPY invoke err: %x\n",
> +			inv_arg.ret);
> +		return 0;
> +	}
> +
> +	rng_data = tee_shm_get_va(pvt_data->entropy_shm_pool, 0);
> +	if (IS_ERR(rng_data)) {
> +		dev_err(pvt_data->dev, "tee_shm_get_va failed\n");
> +		return 0;
> +	}
> +
> +	rng_size = param[0].u.memref.size;
> +	memcpy(buf, rng_data, rng_size);
> +
> +	return rng_size;
> +}
> +
> +static int optee_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
> +{
> +	struct optee_rng_private *pvt_data = to_optee_rng_private(rng);
> +	size_t read = 0, rng_size = 0;
> +	int timeout = 1;
> +	u8 *data = buf;
> +
> +	if (max > MAX_ENTROPY_REQ_SZ)
> +		max = MAX_ENTROPY_REQ_SZ;
> +
> +	while (read == 0) {
> +		rng_size = get_optee_rng_data(pvt_data, data, (max - read));
> +
> +		data += rng_size;
> +		read += rng_size;
> +
> +		if (wait) {
> +			if (timeout-- == 0)
> +				return read;
> +			msleep((1000 * (max - read)) / pvt_data->data_rate);
> +		} else {
> +			return read;
> +		}
> +	}
> +
> +	return read;
> +}
> +
> +static int optee_rng_init(struct hwrng *rng)
> +{
> +	struct optee_rng_private *pvt_data = to_optee_rng_private(rng);
> +	struct tee_shm *entropy_shm_pool = NULL;
> +
> +	entropy_shm_pool = tee_shm_alloc(pvt_data->ctx, MAX_ENTROPY_REQ_SZ,
> +					 TEE_SHM_MAPPED | TEE_SHM_DMA_BUF);
> +	if (IS_ERR(entropy_shm_pool)) {
> +		dev_err(pvt_data->dev, "tee_shm_alloc failed\n");
> +		return PTR_ERR(entropy_shm_pool);
> +	}
> +
> +	pvt_data->entropy_shm_pool = entropy_shm_pool;
> +
> +	return 0;
> +}
> +
> +static void optee_rng_cleanup(struct hwrng *rng)
> +{
> +	struct optee_rng_private *pvt_data = to_optee_rng_private(rng);
> +
> +	tee_shm_free(pvt_data->entropy_shm_pool);
> +}
> +
> +static struct optee_rng_private pvt_data = {
> +	.optee_rng = {
> +		.name		= DRIVER_NAME,
> +		.init		= optee_rng_init,
> +		.cleanup	= optee_rng_cleanup,
> +		.read		= optee_rng_read,
> +	}
> +};
> +
> +static int get_optee_rng_info(struct device *dev)
> +{
> +	u32 ret = 0;
> +	struct tee_ioctl_invoke_arg inv_arg = {0};
> +	struct tee_param param[4] = {0};
> +
> +	/* Invoke TA_CMD_GET_RNG_INFO function of Trusted App */
> +	inv_arg.func = TA_CMD_GET_RNG_INFO;
> +	inv_arg.session = pvt_data.session_id;
> +	inv_arg.num_params = 4;
> +
> +	/* Fill invoke cmd params */
> +	param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT;
> +
> +	ret = tee_client_invoke_func(pvt_data.ctx, &inv_arg, param);
> +	if ((ret < 0) || (inv_arg.ret != 0)) {
> +		dev_err(dev, "TA_CMD_GET_RNG_INFO invoke err: %x\n",
> +			inv_arg.ret);
> +		return -EINVAL;
> +	}
> +
> +	pvt_data.data_rate = param[0].u.value.a;
> +	pvt_data.optee_rng.quality = param[0].u.value.b;
> +
> +	return 0;
> +}
> +
> +static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
> +{
> +	if (ver->impl_id == TEE_IMPL_ID_OPTEE)
> +		return 1;
> +	else
> +		return 0;
> +}
> +
> +static int optee_rng_probe(struct device *dev)
> +{
> +	struct tee_client_device *rng_device = to_tee_client_device(dev);
> +	int ret = 0, err = -ENODEV;
> +	struct tee_ioctl_open_session_arg sess_arg = {0};
> +
> +	/* Open context with TEE driver */
> +	pvt_data.ctx = tee_client_open_context(NULL, optee_ctx_match, NULL,
> +					       NULL);
> +	if (IS_ERR(pvt_data.ctx))
> +		return -ENODEV;
> +
> +	/* Open session with hwrng Trusted App */
> +	memcpy(sess_arg.uuid, rng_device->id.uuid.b, TEE_IOCTL_UUID_LEN);
> +	sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC;
> +	sess_arg.num_params = 0;
> +
> +	ret = tee_client_open_session(pvt_data.ctx, &sess_arg, NULL);
> +	if ((ret < 0) || (sess_arg.ret != 0)) {
> +		dev_err(dev, "tee_client_open_session failed, err: %x\n",
> +			sess_arg.ret);
> +		err = -EINVAL;
> +		goto out_ctx;
> +	}
> +	pvt_data.session_id = sess_arg.session;
> +
> +	err = get_optee_rng_info(dev);
> +	if (err)
> +		goto out_sess;
> +
> +	err = hwrng_register(&pvt_data.optee_rng);
> +	if (err) {
> +		dev_err(dev, "hwrng registration failed (%d)\n", err);
> +		goto out_sess;
> +	}
> +
> +	pvt_data.dev = dev;
> +
> +	return 0;
> +
> +out_sess:
> +	tee_client_close_session(pvt_data.ctx, pvt_data.session_id);
> +out_ctx:
> +	tee_client_close_context(pvt_data.ctx);
> +
> +	return err;
> +}
> +
> +static int optee_rng_remove(struct device *dev)
> +{
> +	hwrng_unregister(&pvt_data.optee_rng);
> +	tee_client_close_session(pvt_data.ctx, pvt_data.session_id);
> +	tee_client_close_context(pvt_data.ctx);
> +
> +	return 0;
> +}
> +
> +const struct tee_client_device_id optee_rng_id_table[] = {
> +	{UUID_INIT(0xab7a617c, 0xb8e7, 0x4d8f,
> +		   0x83, 0x01, 0xd0, 0x9b, 0x61, 0x03, 0x6b, 0x64)},
> +	{}
> +};
> +
> +MODULE_DEVICE_TABLE(tee, optee_rng_id_table);
> +
> +static struct tee_client_driver optee_rng_driver = {
> +	.id_table	= optee_rng_id_table,
> +	.driver		= {
> +		.name		= DRIVER_NAME,
> +		.bus		= &tee_bus_type,
> +		.probe		= optee_rng_probe,
> +		.remove		= optee_rng_remove,
> +	},
> +};
> +
> +static int __init optee_rng_mod_init(void)
> +{
> +	return driver_register(&optee_rng_driver.driver);
> +}
> +
> +static void __exit optee_rng_mod_exit(void)
> +{
> +	driver_unregister(&optee_rng_driver.driver);
> +}
> +
> +module_init(optee_rng_mod_init);
> +module_exit(optee_rng_mod_exit);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Sumit Garg <sumit.garg@linaro.org>");
> +MODULE_DESCRIPTION("OP-TEE based random number generator driver");
> -- 
> 2.7.4
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply index

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-29  5:49 [PATCH v6 0/4] Introduce TEE bus driver framework Sumit Garg
2019-01-29  5:49 ` [PATCH v6 1/4] tee: add bus driver framework for TEE based devices Sumit Garg
2019-01-29  5:49 ` [PATCH v6 2/4] tee: add supp_nowait flag in tee_context struct Sumit Garg
2019-01-29  5:49 ` [PATCH v6 3/4] tee: optee: add TEE bus device enumeration support Sumit Garg
2019-02-01  8:28   ` Jens Wiklander
2019-02-01  8:42     ` Sumit Garg
2019-01-29  5:49 ` [PATCH v6 4/4] hwrng: add OP-TEE based rng driver Sumit Garg
2019-01-29  9:34   ` Daniel Thompson [this message]
2019-01-31  8:41 ` [PATCH v6 0/4] Introduce TEE bus driver framework Jens Wiklander
2019-01-31 12:05   ` Herbert Xu
2019-01-31 12:24     ` Sumit Garg
2019-02-12 11:05 ` Ard Biesheuvel
2019-02-12 12:09   ` Sumit Garg
2019-02-12 12:10     ` Ard Biesheuvel
2019-02-12 12:55       ` Sumit Garg

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190129093439.oftwq4labucdql4b@holly.lan \
    --to=daniel.thompson@linaro.org \
    --cc=ard.biesheuvel@linaro.org \
    --cc=arnd@arndb.de \
    --cc=bhsharma@redhat.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=herbert@gondor.apana.org.au \
    --cc=jens.wiklander@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=michal.lkml@markovi.net \
    --cc=mpm@selenic.com \
    --cc=robh+dt@kernel.org \
    --cc=sumit.garg@linaro.org \
    --cc=tee-dev@lists.linaro.org \
    --cc=yamada.masahiro@socionext.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git