From: James Morse <james.morse@arm.com>
To: linux-acpi@vger.kernel.org
Cc: Rafael Wysocki <rjw@rjwysocki.net>,
Tony Luck <tony.luck@intel.com>, Xie XiuQi <xiexiuqi@huawei.com>,
Marc Zyngier <marc.zyngier@arm.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
Christoffer Dall <christoffer.dall@arm.com>,
Dongjiu Geng <gengdongjiu@huawei.com>,
linux-mm@kvack.org, Borislav Petkov <bp@alien8.de>,
james.morse@arm.com, Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>,
kvmarm@lists.cs.columbia.edu,
linux-arm-kernel@lists.infradead.org, Len Brown <lenb@kernel.org>
Subject: [PATCH v8 01/26] ACPI / APEI: Don't wait to serialise with oops messages when panic()ing
Date: Tue, 29 Jan 2019 18:48:37 +0000 [thread overview]
Message-ID: <20190129184902.102850-2-james.morse@arm.com> (raw)
In-Reply-To: <20190129184902.102850-1-james.morse@arm.com>
oops_begin() exists to group printk() messages with the oops message
printed by die(). To reach this caller we know that platform firmware
took this error first, then notified the OS via NMI with a 'panic'
severity.
Don't wait for another CPU to release the die-lock before panic()ing,
our only goal is to print this fatal error and panic().
This code is always called in_nmi(), and since commit 42a0bb3f7138
("printk/nmi: generic solution for safe printk in NMI"), it has been
safe to call printk() from this context. Messages are batched in a
per-cpu buffer and printed via irq-work, or a call back from panic().
Link: https://patchwork.kernel.org/patch/10313555/
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: James Morse <james.morse@arm.com>
---
Changes since v6:
* Capitals in patch subject
* Tinkered with the commit message.
---
drivers/acpi/apei/ghes.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
index f008ba7c9ced..0c46b79e31b1 100644
--- a/drivers/acpi/apei/ghes.c
+++ b/drivers/acpi/apei/ghes.c
@@ -33,7 +33,6 @@
#include <linux/interrupt.h>
#include <linux/timer.h>
#include <linux/cper.h>
-#include <linux/kdebug.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/ratelimit.h>
@@ -949,7 +948,6 @@ static int ghes_notify_nmi(unsigned int cmd, struct pt_regs *regs)
sev = ghes_severity(ghes->estatus->error_severity);
if (sev >= GHES_SEV_PANIC) {
- oops_begin();
ghes_print_queued_estatus();
__ghes_panic(ghes);
}
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-01-29 18:50 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-29 18:48 [PATCH v8 00/26] APEI in_nmi() rework and SDEI wire-up James Morse
2019-01-29 18:48 ` James Morse [this message]
2019-01-29 18:48 ` [PATCH v8 02/26] ACPI / APEI: Remove silent flag from ghes_read_estatus() James Morse
2019-01-29 18:48 ` [PATCH v8 03/26] ACPI / APEI: Switch estatus pool to use vmalloc memory James Morse
2019-01-29 18:48 ` [PATCH v8 04/26] ACPI / APEI: Make hest.c manage the estatus memory pool James Morse
2019-02-01 13:20 ` Borislav Petkov
2019-01-29 18:48 ` [PATCH v8 05/26] ACPI / APEI: Make estatus pool allocation a static size James Morse
2019-01-29 18:48 ` [PATCH v8 06/26] ACPI / APEI: Don't store CPER records physical address in struct ghes James Morse
2019-01-29 18:48 ` [PATCH v8 07/26] ACPI / APEI: Remove spurious GHES_TO_CLEAR check James Morse
2019-01-29 18:48 ` [PATCH v8 08/26] ACPI / APEI: Don't update struct ghes' flags in read/clear estatus James Morse
2019-01-29 18:48 ` [PATCH v8 09/26] ACPI / APEI: Generalise the estatus queue's notify code James Morse
2019-02-01 13:46 ` Borislav Petkov
2019-01-29 18:48 ` [PATCH v8 10/26] ACPI / APEI: Don't allow ghes_ack_error() to mask earlier errors James Morse
2019-01-29 18:48 ` [PATCH v8 11/26] ACPI / APEI: Move NOTIFY_SEA between the estatus-queue and NOTIFY_NMI James Morse
2019-01-29 18:48 ` [PATCH v8 12/26] ACPI / APEI: Switch NOTIFY_SEA to use the estatus queue James Morse
2019-01-29 18:48 ` [PATCH v8 13/26] KVM: arm/arm64: Add kvm_ras.h to collect kvm specific RAS plumbing James Morse
2019-01-29 18:48 ` [PATCH v8 14/26] arm64: KVM/mm: Move SEA handling behind a single 'claim' interface James Morse
2019-01-29 18:48 ` [PATCH v8 15/26] ACPI / APEI: Move locking to the notification helper James Morse
2019-01-29 18:48 ` [PATCH v8 16/26] ACPI / APEI: Let the notification helper specify the fixmap slot James Morse
2019-01-29 18:48 ` [PATCH v8 17/26] ACPI / APEI: Pass ghes and estatus separately to avoid a later copy James Morse
2019-01-29 18:48 ` [PATCH v8 18/26] ACPI / APEI: Make GHES estatus header validation more user friendly James Morse
2019-02-01 14:30 ` Borislav Petkov
2019-01-29 18:48 ` [PATCH v8 19/26] ACPI / APEI: Split ghes_read_estatus() to allow a peek at the CPER length James Morse
2019-01-29 18:48 ` [PATCH v8 20/26] ACPI / APEI: Only use queued estatus entry during in_nmi_queue_one_entry() James Morse
2019-01-29 18:48 ` [PATCH v8 21/26] ACPI / APEI: Use separate fixmap pages for arm64 NMI-like notifications James Morse
2019-01-29 18:48 ` [PATCH v8 22/26] mm/memory-failure: Add memory_failure_queue_kick() James Morse
2019-01-29 18:48 ` [PATCH v8 23/26] ACPI / APEI: Kick the memory_failure() queue for synchronous errors James Morse
2019-01-29 18:49 ` [PATCH v8 24/26] arm64: acpi: Make apei_claim_sea() synchronise with APEI's irq work James Morse
2019-01-30 8:56 ` Julien Thierry
2019-01-29 18:49 ` [PATCH v8 25/26] firmware: arm_sdei: Add ACPI GHES registration helper James Morse
2019-01-29 18:49 ` [PATCH v8 26/26] ACPI / APEI: Add support for the SDEI GHES Notification type James Morse
2019-02-08 11:40 ` [PATCH v8 00/26] APEI in_nmi() rework and SDEI wire-up Rafael J. Wysocki
2019-02-08 14:13 ` James Morse
2019-02-11 11:05 ` Rafael J. Wysocki
2019-02-11 18:35 ` James Morse
2019-02-12 22:14 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190129184902.102850-2-james.morse@arm.com \
--to=james.morse@arm.com \
--cc=bp@alien8.de \
--cc=catalin.marinas@arm.com \
--cc=christoffer.dall@arm.com \
--cc=gengdongjiu@huawei.com \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mm@kvack.org \
--cc=marc.zyngier@arm.com \
--cc=n-horiguchi@ah.jp.nec.com \
--cc=rjw@rjwysocki.net \
--cc=tony.luck@intel.com \
--cc=will.deacon@arm.com \
--cc=xiexiuqi@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).