Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Chen-Yu Tsai <wens@csie.org>
To: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: devicetree@vger.kernel.org,
	Sergey Matyukevich <geomatsi@gmail.com>,
	Andre Przywara <andre.przywara@arm.com>,
	Chen-Yu Tsai <wens@csie.org>,
	linux-kernel@vger.kernel.org, Emmanuel Vadot <manu@freebsd.org>,
	linux-sunxi@googlegroups.com,
	Jagan Teki <jagan@amarulasolutions.com>,
	Hauke Mehrtens <hauke@hauke-m.de>,
	linux-arm-kernel@lists.infradead.org,
	Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH 04/10] arm64: dts: allwinner: h5: nanopi-neo2: Add CPU regulator supply
Date: Wed, 30 Jan 2019 16:41:57 +0800
Message-ID: <20190130084203.25053-5-wens@csie.org> (raw)
In-Reply-To: <20190130084203.25053-1-wens@csie.org>

The Nanopi Neo 2 uses a fixed regulator to supply the CPU cores. The
feedback resistor network can be changed by toggling a GPIO line. This
is effectively a GPIO controlled regulator that can change between 1.1V
and 1.3V.

Cc: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

---

This patch is based on the schematics and has not been tested on an
actual board.
---
 .../dts/allwinner/sun50i-h5-nanopi-neo2.dts   | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
index cc268a69786c..08ffdfb78137 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
@@ -99,6 +99,26 @@
 		gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
 		status = "okay";
 	};
+
+	reg_vdd_cpux: vdd-cpux {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+		enable-gpios =  <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL6 */
+		gpios-states = <0x1>;
+		states = <1100000 0x0
+			  1300000 0x1>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
 };
 
 &ehci0 {
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply index

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-30  8:41 [PATCH 00/10] arm64: dts: allwinner: h5: Enable CPU DVFS (cpufreq) Chen-Yu Tsai
2019-01-30  8:41 ` [PATCH 01/10] ARM: dts: sunxi: bananapi-m2-plus-v1.2: Fix CPU supply voltages Chen-Yu Tsai
2019-01-30  8:41 ` [PATCH 02/10] ARM: dts: bananapi-m2-plus: Add CPU supply regulator Chen-Yu Tsai
2019-01-30  8:41 ` [PATCH 03/10] arm64: dts: allwinner: h5: Hook up cpu regulator supplies Chen-Yu Tsai
2019-01-30  8:41 ` Chen-Yu Tsai [this message]
2019-01-30  8:41 ` [PATCH 05/10] arm64: dts: allwinner: h5: orange-pi-zero-plus: Add CPU regulator supply Chen-Yu Tsai
2019-01-30  8:41 ` [PATCH 06/10] arm64: dts: allwinner: h5: orange-pi-zero-plus2: " Chen-Yu Tsai
2019-01-30  8:42 ` [PATCH 07/10] arm64: dts: allwinner: h5: orange-pi-pc2: " Chen-Yu Tsai
2019-01-30  8:42 ` [PATCH 08/10] arm64: dts: allwinner: h5: orange-pi-prime: " Chen-Yu Tsai
2019-01-30  8:42 ` [PATCH 09/10] arm64: dts: allwinner: h5: Add clock to CPU cores Chen-Yu Tsai
2019-01-30  8:42 ` [PATCH 10/10] arm64: dts: allwinner: h5: Add CPU Operating Performance Points table Chen-Yu Tsai
2019-01-30  9:29   ` Maxime Ripard
2019-01-30  9:41     ` Chen-Yu Tsai
2019-01-30  9:59       ` Maxime Ripard
2019-01-31  3:28       ` Chen-Yu Tsai
2019-09-02 14:03 ` [PATCH 00/10] arm64: dts: allwinner: h5: Enable CPU DVFS (cpufreq) Ondřej Jirman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190130084203.25053-5-wens@csie.org \
    --to=wens@csie.org \
    --cc=andre.przywara@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=geomatsi@gmail.com \
    --cc=hauke@hauke-m.de \
    --cc=icenowy@aosc.io \
    --cc=jagan@amarulasolutions.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=manu@freebsd.org \
    --cc=maxime.ripard@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git