Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Jeremy Linton <jeremy.linton@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: mark.rutland@arm.com, catalin.marinas@arm.com,
	rafael.j.wysocki@intel.com, will.deacon@arm.com,
	linux-kernel@vger.kernel.org,
	Jeremy Linton <jeremy.linton@arm.com>,
	robert.moore@intel.com, linux-acpi@vger.kernel.org,
	lenb@kernel.org, erik.schmauss@intel.com, devel@acpica.org
Subject: [RFC 2/3] arm_pmu: acpi: spe: Add initial MADT/SPE probing
Date: Fri,  8 Feb 2019 18:47:17 -0600
Message-ID: <20190209004718.3292087-3-jeremy.linton@arm.com> (raw)
In-Reply-To: <20190209004718.3292087-1-jeremy.linton@arm.com>

ACPI 6.3 adds additional fields to the MADT GICC
structure to describe SPE PPI's. We pick these out
of the cached reference to the madt_gicc structure
similarly to the core PMU code. We then create a platform
device referring to the IRQ and let the user/module loader
decide whether to load the SPE driver.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
 arch/arm64/include/asm/acpi.h |  3 ++
 drivers/perf/arm_pmu_acpi.c   | 67 +++++++++++++++++++++++++++++++++++
 2 files changed, 70 insertions(+)

diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
index 2def77ec14be..f9f9f2eb5d54 100644
--- a/arch/arm64/include/asm/acpi.h
+++ b/arch/arm64/include/asm/acpi.h
@@ -40,6 +40,9 @@
 	(!(entry) || (entry)->header.length < ACPI_MADT_GICC_MIN_LENGTH || \
 	(unsigned long)(entry) + (entry)->header.length > (end))
 
+#define ACPI_MADT_GICC_SPE  (ACPI_OFFSET(struct acpi_madt_generic_interrupt, \
+	spe_overflow_interrupt) + sizeof(u16))
+
 /* Basic configuration for ACPI */
 #ifdef	CONFIG_ACPI
 pgprot_t __acpi_get_mem_attribute(phys_addr_t addr);
diff --git a/drivers/perf/arm_pmu_acpi.c b/drivers/perf/arm_pmu_acpi.c
index 0f197516d708..725d413b47dc 100644
--- a/drivers/perf/arm_pmu_acpi.c
+++ b/drivers/perf/arm_pmu_acpi.c
@@ -74,6 +74,71 @@ static void arm_pmu_acpi_unregister_irq(int cpu)
 	acpi_unregister_gsi(gsi);
 }
 
+static struct resource spe_resources[] = {
+	{
+		/* irq */
+		.flags          = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device spe_dev = {
+	.name = "arm,spe-v1",
+	.id = -1,
+	.resource = spe_resources,
+	.num_resources = ARRAY_SIZE(spe_resources)
+};
+
+/*
+ * For lack of a better place, hook the normal PMU MADT walk
+ * and create a SPE device if we detect a recent MADT with
+ * a homogeneous PPI mapping.
+ */
+static int arm_spe_acpi_parse_irqs(void)
+{
+	int cpu, ret, irq;
+	u16 gsi = 0;
+	bool first = true;
+
+	struct acpi_madt_generic_interrupt *gicc;
+
+	/*
+	 * sanity check all the GICC tables for the same interrupt number
+	 * for now we only support homogeneous ACPI/SPE machines.
+	 */
+	for_each_possible_cpu(cpu) {
+		gicc = acpi_cpu_get_madt_gicc(cpu);
+
+		if (gicc->header.length < ACPI_MADT_GICC_SPE)
+			return -ENODEV;
+
+		if (first) {
+			gsi = gicc->spe_overflow_interrupt;
+			if (!gsi)
+				return -ENODEV;
+			first = false;
+		} else if (gsi != gicc->spe_overflow_interrupt) {
+			pr_warn("ACPI: SPE must have homogeneous interrupts\n");
+			return -EINVAL;
+		}
+	}
+
+	irq = acpi_register_gsi(NULL, gsi, ACPI_LEVEL_SENSITIVE,
+				ACPI_ACTIVE_HIGH);
+	if (irq < 0) {
+		pr_warn("ACPI: SPE Unable to register interrupt: %d\n", gsi);
+		return irq;
+	}
+
+	spe_resources[0].start = irq;
+	ret = platform_device_register(&spe_dev);
+	if (ret < 0) {
+		pr_warn("ACPI: SPE: Unable to register device\n");
+		acpi_unregister_gsi(gsi);
+	}
+
+	return ret;
+}
+
 static int arm_pmu_acpi_parse_irqs(void)
 {
 	int irq, cpu, irq_cpu, err;
@@ -279,6 +344,8 @@ static int arm_pmu_acpi_init(void)
 	if (acpi_disabled)
 		return 0;
 
+	arm_spe_acpi_parse_irqs(); /* failures are expected */
+
 	ret = arm_pmu_acpi_parse_irqs();
 	if (ret)
 		return ret;
-- 
2.17.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply index

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-09  0:47 [RFC 0/3] arm64: SPE ACPI enablement Jeremy Linton
2019-02-09  0:47 ` [RFC 1/3] ACPICA: ACPI 6.3: Add MADT/GICC/SPE extension Jeremy Linton
2019-02-11 18:27   ` Schmauss, Erik
2019-02-09  0:47 ` Jeremy Linton [this message]
2019-02-11 15:34   ` [RFC 2/3] arm_pmu: acpi: spe: Add initial MADT/SPE probing Sudeep Holla
2019-02-14 17:11   ` Will Deacon
2019-02-14 18:03     ` Jeremy Linton
2019-02-15 15:00       ` Will Deacon
2019-02-15 16:04         ` Jeremy Linton
2019-02-09  0:47 ` [RFC 3/3] perf: arm_spe: Enable ACPI/Platform automatic module loading Jeremy Linton
2019-02-11 15:35   ` Sudeep Holla

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190209004718.3292087-3-jeremy.linton@arm.com \
    --to=jeremy.linton@arm.com \
    --cc=catalin.marinas@arm.com \
    --cc=devel@acpica.org \
    --cc=erik.schmauss@intel.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=rafael.j.wysocki@intel.com \
    --cc=robert.moore@intel.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git