Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Shawn Guo <shawnguo@kernel.org>
To: Pankaj Bansal <pankaj.bansal@nxp.com>
Cc: Andrew Lunn <andrew@lunn.ch>,
	Florian Fainelli <f.fainelli@gmail.com>,
	"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>,
	Leo Li <leoyang.li@nxp.com>
Subject: Re: [PATCH v3] arm64: dts: lx2160aqds: Add mdio mux nodes
Date: Mon, 11 Feb 2019 11:00:12 +0800
Message-ID: <20190211030010.GI22487@dragon> (raw)
In-Reply-To: <20190206150520.9683-1-pankaj.bansal@nxp.com>

On Wed, Feb 06, 2019 at 09:40:33AM +0000, Pankaj Bansal wrote:
> The two external MDIO buses used to communicate with phy devices that are
> external to SOC are muxed in LX2160AQDS board.
> 
> These buses can be routed to any one of the eight IO slots on LX2160AQDS
> board depending on value in fpga register 0x54.
> 
> Additionally the external MDIO1 is used to communicate to the onboard
> RGMII phy devices.
> 
> The mdio1 is controlled by bits 4-7 of fpga register and mdio2 is
> controlled by bits 0-3 of fpga register.
> 
> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
> ---
> 
> Notes:
>     V3:
>     - Add status = disabled in soc file and status = okay in board file
>       for external MDIO nodes
>     - Add interrupts property in external mdio nodes in soc file
>     V2:
>     - removed unnecassary TODO statements
>     - removed device_type from mdio nodes
>     - change the case of hex number to lowercase
>     - removed board specific comments from soc file
> 
>  .../boot/dts/freescale/fsl-lx2160a-qds.dts   | 123 +++++++++++++++++
>  .../boot/dts/freescale/fsl-lx2160a.dtsi      |  22 +++
>  2 files changed, 145 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> index 99a22abbe725..079264b391a2 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> @@ -35,6 +35,14 @@
>  	status = "okay";
>  };
>  
> +&emdio1 {
> +	status = "okay";
> +};
> +
> +&emdio2 {
> +	status = "okay";
> +};
> +
>  &esdhc0 {
>  	status = "okay";
>  };
> @@ -46,6 +54,121 @@
>  &i2c0 {
>  	status = "okay";
>  
> +	fpga@66 {
> +		compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c";
> +		reg = <0x66>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		mdio-mux-1@54 {
> +			mdio-parent-bus = <&emdio1>;
> +			reg = <0x54>;		 /* BRDCFG4 */
> +			mux-mask = <0xf8>;      /* EMI1_MDIO */
> +			#address-cells=<1>;
> +			#size-cells = <0>;
> +
> +			mdio@0 {
> +				reg = <0x00>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};

Please have a newline between nodes.  It doesn't deserve a respin
though.  I can fix them up when applying if Leo is fine with this
version.

Shawn

> +			mdio@40 {
> +				reg = <0x40>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +			mdio@c0 {
> +				reg = <0xc0>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +			mdio@c8 {
> +				reg = <0xc8>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +			mdio@d0 {
> +				reg = <0xd0>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +			mdio@d8 {
> +				reg = <0xd8>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +			mdio@e0 {
> +				reg = <0xe0>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +			mdio@e8 {
> +				reg = <0xe8>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +			mdio@f0 {
> +				reg = <0xf0>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +			mdio@f8 {
> +				reg = <0xf8>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +		};
> +
> +		mdio-mux-2@54 {
> +			mdio-parent-bus = <&emdio2>;
> +			reg = <0x54>;		 /* BRDCFG4 */
> +			mux-mask = <0x07>;      /* EMI2_MDIO */
> +			#address-cells=<1>;
> +			#size-cells = <0>;
> +
> +			mdio@0 {
> +				reg = <0x00>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +			mdio@1 {
> +				reg = <0x01>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +			mdio@2 {
> +				reg = <0x02>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +			mdio@3 {
> +				reg = <0x03>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +			mdio@4 {
> +				reg = <0x04>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +			mdio@5 {
> +				reg = <0x05>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +			mdio@6 {
> +				reg = <0x06>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +			mdio@7 {
> +				reg = <0x07>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +		};
> +	};
> +
>  	i2c-mux@77 {
>  		compatible = "nxp,pca9547";
>  		reg = <0x77>;
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> index a79f5c1ea56d..7def5252ac1a 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> @@ -762,5 +762,27 @@
>  				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
>  			dma-coherent;
>  		};
> +
> +		/* WRIOP0: 0x8b8_0000, E-MDIO1: 0x1_6000 */
> +		emdio1: mdio@8b96000 {
> +			compatible = "fsl,fman-memac-mdio";
> +			reg = <0x0 0x8b96000 0x0 0x1000>;
> +			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			little-endian;	/* force the driver in LE mode */
> +			status = "disabled";
> +		};
> +
> +		/* WRIOP0: 0x8b8_0000, E-MDIO2: 0x1_7000 */
> +		emdio2: mdio@8b97000 {
> +			compatible = "fsl,fman-memac-mdio";
> +			reg = <0x0 0x8b97000 0x0 0x1000>;
> +			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			little-endian;	/* force the driver in LE mode */
> +			status = "disabled";
> +		};
>  	};
>  };
> -- 
> 2.17.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-06  9:40 Pankaj Bansal
2019-02-11  3:00 ` Shawn Guo [this message]
2019-02-11 20:43   ` Leo Li
2019-02-12  3:26     ` Pankaj Bansal
2019-02-12 18:01       ` Li Yang
2019-02-14 22:32         ` Li Yang
2019-02-18  5:49           ` Pankaj Bansal

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190211030010.GI22487@dragon \
    --to=shawnguo@kernel.org \
    --cc=andrew@lunn.ch \
    --cc=f.fainelli@gmail.com \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=netdev@vger.kernel.org \
    --cc=pankaj.bansal@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git